Having problems with your Xerox XA7-192i 19" LCD Monitor ?

Monitor comes on, shows the screen for a second then goes blank

\015 The monitor is still getting power as they power light is still blue, I switch it off and then on again and it will show the screen for a second then goes blank.\015\012\015\012I'm using a different monitor on the same computer so it doesn't seem to be the graphics card.\015

Answers :

I think it is down to ur existing monitor drivers if u unistall them and then go to ur manufacturing site for ur new monitor and download the drivers for ur monitor and then try taking ur existing monitor out and bye plugging ur new monitor in it should support the drivers and work trust me it should work i done it last night. hope it helps night!

You have a blown capacitor. I have a 19in Sceptor that did the same thing. I going to Radio Shack to buy the parts tommorrow. Should take about 30 minutes to de solder and re solder the new Capacitors.

\015\012\015\012

 

\015\012\015\012

 

Repair Help & Product Troubleshooting for Xerox XA7-192i 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Blank Laptop Screen


The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook

Screen comes on briefly then blanks out.


Check inverter, memory, and powersupply. ... HP w1907 LCD Monitor

Blank screen with intermittent operation


You have bad capacitors in the power board inside the monitor replace these and the monitor will work fine ... ViewSonic Optiquest Q9b 19" Flat Panel LCD Monitor

I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the monitors screen comes alive for 2 to 3 second and after that its goes to blank.


Try to do this: Just before the Windows start up screen (after the bios loading) press F8 and log in at safe mode settings. If at this mode you can see your screen change the resolution settings at a lower set. Save and reboot normally. Now try step ... CTX S762A 17" LCD Monitor

3yr old got ahold of monitor


Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors

Monitor comes on, shows the screen for a second then goes blank


I think it is down to ur existing monitor drivers if u unistall them and then go to ur manufacturing site for ur new monitor and download the drivers for ur monitor and then try taking ur existing monitor out and bye plugging ur new monitor in it sho ... Xerox XA7-192i 19" LCD Monitor

Vaio fj270 wont boot to windows stuck with a blinking underscore


Hello and thank you for using Fixya!\015\012\015\012First, check and make sure there are no CD's in the CDrom player. Also, check an make sure there is no external storage devices, such as a flash drive, external, etc.\015\012 ... Sony VAIO VGN-FJ270/B Notebook

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

Blank screen on DV2000, power on but just black screen


Hello and thank you for using Fixya's services. I have a couple of questions and some troubleshooting tips for you:Questions: Is the splash screen coming on at all? Any picture or text right when you boot up? What Window ... Dell Latitude D600 Notebook

Power supply on 17" acer monitor


Franh, Typical of a lcd/fpd monitor! There is nothing you or hundreds of others can do to repair it all by yourself. I have repaired 3 monitors and helped tutor 2 others on fixya with their monitors. All had same exact symptom as your monitor. I need ... Acer AL1916W 19" LCD Monitor

Monitor goes blank


Sounds like the back light inverter board is bad. \015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brightness allowing you to see ... Dell E153FPc 15" TFT LCD Flat Panel Monitor

Samsung 931B Monitor Screen will not stay


Jane657, Hi there. Will you stop pushing the On/Off button on your lcd/fpd. It's Broke. Period. End. Finito!!! You will not fix it. However there is one test that you should do to determine hoe bad the problem is. You will need to reconnect the 931B ... Samsung SyncMaster 931BF LCD Monitor

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

Hp flat panel monitor comes on shows logon and then blank screen


Ok, another words, monitor powers up for few seconds and shuts down by itself. If green LED on the front panel turns off as well or stays on?If stays on, then inverter turns into protection mode because of old backlight lamps.If it turns ... Dell E152FP 15" Flat Panel LCD Monitor

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Emachines model 780 monitor comes on for one second then goes blank


I have a Similar issue with an emachines monitor..after trying a few things such as trying it on a different computer...changing cables and changing power cords..also turned the brightness up all the way...you can faintly see the windows screen on th ... E-Machines eMachines Desktop PC

Dear Sir, I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the monitors screen comes alive for 2 to 3 second and after that its goes to blank.


Yes turn on the computer and keep pressing F2 contineulsy immediatly after display observed then menu will be come then highlight on last good known configuation and press enter problem will be solved ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

Monitor displays breifly then goes to blank screen


The green power light indicates that the monitor is receiving from the\015\012computer correctly. I suspect it is going into high voltage\015\012shutdown. There is a safety circuit that monitors the high\015\012voltage and shuts the monitor down if ... BenQ FP731 17" LCD Monitor

Screen comes up for about 10 seconds, then goes blank


Hello Robert,You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is ca ... LG Flatron L1750S 17" LCD Monitor

I have a Westinghouse L2046NV lcd monitor. It was working earlier. I moved my computer, unhooking and rehooking the connections. Now when I boot the pc I do get the windows 98 curtain and it shows up clear, but when the desktop is just about to show the screen goes "near" blank. I say near because I can faintly see the image of the desktop. I tried going from the digital connector to the analog connector. If I turn the monitor off and on the desktop will show clear for a second and then di


Hello,You have a monitor with a very common problem, a blown power supply. The heat that builds up in the monitor case causes parts called capacitors to overheat and blow out. When you turn on the monitor they try to hold a charge and sho ... Westinghouse L1975NW Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

E manchine e17tg turn on power you get just a


Mrmadgbull, How long will e17tg display the WIN-desktop before it goes to BLACK screen? Is it 1, 2 ...4, 5.....20 seconds? How old is unit? Does unit have internal ac to dc SMPS or external (lay on floor) SMPS? Did problem occur suddenly? What do yo ... E-Machines E17T 17" Flat Panel LCD Monitor

Viewsonic vx910 display does not stay on.


... ViewSonic VX910 19" LCD Monitor

Monitor displays breifly then goes to blank screen


Try booting up your CPU again, while on its process of booting press F8, then select (something MODE), okay, then when you are at windows environment go to control panel, select display, set your display settings its default or 900 by 600 pixels sett ... Dell Dimension 4600 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7920 seconds