Having problems with your X-10 LM929 19IN LCD 12X10-.294MM SPK BLK ?
Osd lock in my LCD
😍53% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/62-lazy-portable-table.html ➡ sellerscity.net/62-lazy-portable-table.html Adjustable Laptop Stand its platform for whatever you need : Bed & Couch - Book tray - watch movies - dinner table ✅ Now you can enjoy working . ✅ prevent computer neck pain (computer monitor is at eye level) . ✅ prevent overheating laptop . ✅ will serve you anywhere you go get your table today and make your life so much easier ✅it collapses down to a flat surface for easy storing. 😍53% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/62-lazy-portable-table.html ➡ sellerscity.net/62-lazy-portable-table.html 🎁 Makes the PERFECT gift!Posted by SellersCity on Sunday, April 15, 2018
\015 Hi All, I have just bought a new computer and it came with a widescreen\015\012LCD. I thought I would use my old 19" AOC LM929 monitor for my CCTV\015\012cameras at home as the screen is too good to dump. I have used a\015\012Grand vision 2000 so convert the CCTV signal to SVGA? and the monitor\015\012shows an on screen message saying "input not supported". If I turn on\015\012the screen with my finger holding down the menu and power button the\015\012the box says "OSD locked". This then clears and I can use the monitor\015\012without the "input not supported" box floating round the screen. My\015\012problem is when the CCTV switcher changes to another camera the monitor\015\012looses sync and I have to switch the monitor off and start up with the\015\012menu button pressed all over again.Is there a way I can disable the error messages permanently...possibly pressing the buttons in a certain way to achieve this?Many thanksConfused!!\015
\015\012You might have to change your resolution settings....
\015\012This solution is for AOC Monitors......
\015\012Setting the Optimal Resolution
\015\012The recommended resolution for this monitor is 1680 by 1050. To setup the monitor to this resolution, follow the steps below.
- Click START. \015\012
- Click SETTINGS. \015\012
- Click CONTROL PANEL. \015\012
- Double click DISPLAY. \015\012
- Click SETTINGS. \015\012
- Set the resolution SLIDE-BAR to 1680 by 1050.
\015\012Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these settings, the picture can be adjusted to your personal preferences.
* The power cord should be connected.
* Press the power button to turn on the monitor. The power indicator will light up.
\015\012\015\012Hope this helps ,
\015\012Rate me please,
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
OSD lock - I think
This is for Viewsonic LCD, but it's probly pretty similar for you...OSD and Power Button Lock ModesOSD Lock This mode locks all current control settings and prevents access tothe control menus until this mode is unlocked. ... ViewSonic E70f 17" CRT Monitor
I am using view sonic monitor & i am facing a problem with it .At the centre of the screen there is a message in blue colour filled box that"osd lock"its irritating
OSD and Power Lock Settings• OSD Lock: Press and hold  and the up arrow for 10 seconds. If any buttons arepressed the message OSD Locked will display for 5 seconds.• OSD Unlock: Press and hold  and ... ViewSonic E70fb 17" CRT Monitor
OSD locked in viewsonic n3000w
... ViewSonic E70f 17" CRT Monitor
Hcl lcd monitor osd locked
My moniter was automatic restarted, and osd lock not open,where is is osd open option? ... Acer AL1916W 19" LCD Monitor
OSD locked how do I unlock - AOC 917Sw 19" LCD Monitor
OSD Lock Function: To lock the OSD, press and hold the Left button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the Left button while the monitor is off and then press power button t ... AOC 917Sw 19" LCD Monitor
OSD LOCKED in Compaq LCD 17" Model No. 7020
I had this problem with a different model. try this.. turn off the monitor. . press and hold the Menu key while you turn on the monitor again. ... Compaq FP 7020 17" Flat Panel LCD Monitor
Monitor what does OSD LOCKOUT ME
Hello, The OSD (on screen display) is a lock feature that locks out all access to the control functions. Basically you can use this feature to lock the access to the control functions once you have everything set the way you want it so no one ... HP Compaq WF1907 Monitor
Locked osd my aoc lcd osd is locked how do i open it
Please try to Turn the monitor off. Hold down the Menu button while the monitor is turned off, then press the Power button again to turn the monitor back on. This should unlock your OSD menu. best regards ... AOC 917Sw 19" LCD Monitor
OSD Locked When I try to adjust the lighting settings on my monitor, I get an "OSD LOCKED" message on the screen. I've tried the solution of holding down on the Menu button until I get an OSD UNLOCKED message, but no message appears. Is there any other solution to this problem? Thanks
You can try this lcd monitor factory service mode login method here http://www.fastrepairguide.com/monitor-and-lcd-monitor-problem-solutions/login-factory-service-mode-lg-lcd-mo.html\015\012http://www.fastrepairguide.com/monitor-and-lcd-monitor-probl ... LG Flatron L1750S 17" LCD Monitor
Philips 170S LCD - OSD locked and unable to remove display from screen, unable to adjust. Locked on Brightness setting which continually drops to 0. Any thoughts on how to fix?
THE PROBLEM IS SAME... I JUST WANT TO BROKE MY LCD ... Philips 170S7FS 17" LCD Monitor
HI My dear friend I wonder if you can help me my, LCD monitor flatron l1715s menue is not working it says OSD locked , how can I un locked it?? Thank you
Press the menu button and hold it in,it will flash up OSD unlocked after a while ... LG Flatron L1715S 17" LCD Monitor
Osd lock in my LCD
Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK
OSD Menu on my montior is lock on a Balance CM2017 LCD monitor i cant change any of my menu opitions....HELP
The answer depends on your monitor model, of course. For some of the LCD models you may reset the monitor by pressing (and releasing) the "MENU" button (OSD menu appears) then hold the "SOURCE" button for a few seconds. When you see the monitor ... PC Desktops
Lg lcd monitor
Toi dang su dung mang hinh 17' hieu viewsonic monitor ,hien dang co van de la mang hinh hay hien thi dong chu Osd loekd , khien cho toi khong the xem het duoc ca mang hinh duoc . lam the nao co the khac phuc su co nay ,xin huong dan cach khac phu ... Computer Monitors
OSD screen lock
The OSD is controlled by the video card board (logic board)\015\012It is information stored on the eprom, not something you can just get to. It has to be programmed. \015\012\015\012To gain access to the OSD Service Menu from a user ... Computer Monitors
A lock symbol appears - Dell E152FP 15" Flat Panel LCD Monitor
Hello. On this Dell flat panel the menu access appears to be locked, if the lock symbol you are referring to is from the monitor itself. \015\012\015\012You should be able to lock or unlock the OSD by pushing and holding the Menu button ... Dell E152FP 15" Flat Panel LCD Monitor
How to unlock OSD lockout in HP L1940T Monitor
How to unlock HP 1940 LCD monitor?? i try with holding menu button and power also..but didnt show me unlock...i hold like 1min even more...and its keep to blink OSD lock...and Main Menu on my screen.Can u tell what i need to do Thank you ... HP L1940T 19" LCD Monitor
Padlock appears on screen - Dell E171FPb 17" Flat Panel LCD Monitor
The padlock is an indication that the On Screen Display is locked. You can also lock or unlock the OSD by pushing the Menu button for over 15 seconds.\015\012\015\012 ... Dell E171FPb 17" Flat Panel LCD Monitor
E173FP 17" LCD Monitor Problem
I have the same problem. It seems like a virus to me, but my anti-virus doesn't find anything. I went to the main menu on the moniter and changed the display time to five seconds and locked the OSD display. Now all the appears is a smaller box showin ... Dell E173FP (Black) (Dark Gray) 17" LCD Monitor
LCD Problem SIR, I have a LCD (FP 5315). When I turn on my computer, there is a problem in it. It shows a white box with written*OSD Lock out* again and again. When this stops the small window for settings is started. There was a great problem for me to work. I could not stop it as I tried for my best. Send information on my yahoo ID. AND MY id is : [email protected] Plz reply me as soon as possible
I have the switches for this unit. [email protected] ... HP Compaq FP5315 15" LCD Monitor
SELECT BUTTONS ARE LOCKED NEED TO UNLOCK - Dell E228WFP LCD Monitor
You can lock or unlock the OSD by pushing and holding the Menu button for \015\01215 seconds. (@nd button from the left)http://support.dell.com/support/edocs/monitors/E228WFP/En/ug/setup.htm#Using%20the%20OSD ... Dell E228WFP LCD Monitor
I need to find the VGA controller for the Dell 2005FPW monitor
You can use on all vga cards(you dont need any special controler), this monitor has a USB hub\015\012and its is detected normaly on winxp or above, and the vga cards detect the monitor auto.\015\012i give you the monitor ... Dell UltraSharp 2005FPW 20.1" LCD Monitor
Osd locked . how do I open it> - LG Flatron L1750S 17" LCD Monitor
Analog message locked ... LG Flatron L1750S 17" LCD Monitor
LCD Monitor will not switch input selections
NOTE: You can also lock or unlock the OSD by pushing and holding the Menu button for 15 seconds. In this mode All buttons will be locked including the "Menu" button. You can unlock by pushing and holding the Menu button for 15 seconds. ... Dell UltraSharp 2005FPW 20.1" LCD Monitor
Osd problem when i boot my computer is show a screen and then say's osd locked, it checket to see if it was my videocard but it works fine so the only thing i can think of is that it my lcd monitor. is there any way to solve this problem with out sending it to get repaired i tried holding the power button for 20-30 secs. please if you could be of an asstance i would be grateful
Did you try factory reset? If not, you should do it. ... Liquid Video L17LCD2 17" Flat Panel LCD Monitor