Having problems with your Westinghouse LCM-19v5 Monitor ?

I have a Westinghouse LCM-19v5 monitor. When I start the computer, after the startup screens, the monitor goes black and I get a red bar with the message "Out of Range." I am in safe mode right now, the only way that I could get the screen up.


Answers :

In the safe mode you have to change the resoulution and the frequency to 60 hz you can get it by fright click on the screen and then choose properties and then choose settings and adjust the resolution to 1280 to 800 and then choose advanced then choose monitor then choose the frecuancy to 60 hz ok and apply ok and insa every thing will be ok conntact me for more if you still haveing the same problem
Repair Help & Product Troubleshooting for Westinghouse LCM-19v5 Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

I have a Westinghouse LCM-19v5 monitor. When I start the computer, after the startup screens, the monitor goes black and I get a red bar with the message "Out of Range." I am in safe mode right now, the only way that I could get the screen up.


In the safe mode you have to change the resoulution and the frequency to 60 hz you can get it by fright click on the screen and then choose properties and then choose settings and adjust the resolution to 1280 to 800 and then choose advanced then cho ... Westinghouse LCM-19v5 Monitor

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

One more prob


Keep pressing F8 during the system boot up and select "safe mode" and press enter ...after you get into the safe mode then go tostart menu>control panel > system> hardware tabdevice managerin this go ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

When I switch my windows XP Home Edition on instead of the usual gradual build up to Desk Top & icon programmes etc. I get the usual large black screen but instead of the windows motif appearing I get a deep blue oblong about 6"x1" with a message ("OUT OF RANGE") (H:27.8K V: 61.9) The H27. 8K Flashing Red This happens every time when switching on and the only means of closing down is to turn the power off. I have a Lap Top connectd to the Desk Top


The results you are seeing are actually from the monitor itself. It's telling you the vertical and horizontal sync frequencies to help you troubleshoot your lack of display.\015\012\015\012You'd usually see this happen when someone has se ... Packard Bell PC Desktops

RectangulaR box on my screen says: input not supported


If your monitor is displaying a message, that's good news: Your monitor is not shut. What the message is saying is that either the refresh rate frequency, or the resolution you have set your video card to on your pc/laptop, is too high for your LCD ... Acer AL1916W 19" LCD Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

Monitor not displaying


Sounds like your video adapter settings have been wedged. If you are running Windows XP Service Pack 2, you can use the following steps.\015\012\015\0121) Boot the laptop into safe mode. Boot into safe mode with networking support if possible. This c ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

My ViewSonic computer monitor keeps displaying a Vga Not Support Message upon booting then the message Out Of Range comes up on a completely dark screen. Need Help


It sounds like the computer is trying to use a resolution that the monitor cannot handle. Boot into safe mode by pressing the f8 key during boot up and select safe mode. Once booted, right click on the desktop and select properties. In settings lower ... ViewSonic VA721 17" LCD Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Blue box I have been given a flatscreen monitor which on installation has a blue box in the middle of the screen saying "Input signal out of range". How do i remove this?


You need to set the screen resolution or refresh rate of your windows. I am assuming you have XP.\015\012PLEASE READ THE WHOLE OF THIS FIRST, BECAUSE YOU MAY WISH TO DO THE BIT AT THE BOTTOM FIRST, LABELLED 'IF ALL ELSE FAILS'\015\012 ... Relisys TL 766 Monitor

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Gateway FPD1530 loses image shortly after powering up.


Try booting into safe mode. press F8 while the computer is booting. see if everything stays normal. It should tell you that it booted into safe mode. Once there, change the resolution or the frequency of the display(also known as the refresh rate) by ... Computer Monitors

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

Blue colour background saying it is the stop error screen.


The fix from Microsoft's website:\015\012To resolve this problem, start your computer in Safe mode, remove the display adapter, rename the .inf files that are associated with the display adapter drivers, restart your computer in Normal mode, an ... Sony VAIO Digital Studio PCV-RX550 PC Desktop

Dell E228WFP Monitor failure


To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor

Hmm... is still not working


Start your computer and tap the F8 key as soon as the computer begins to power-up. Keep tapping until you come to the Safe Mode screen. When the screen alerts you to the fact that you have chosen Safe Mode, click OK.\015\012\015\012When y ... HP Pavilion a800n (PP163AA) PC Desktop

No graphical display during booting up of windows XP. After a while an on screen message is displayed as "High resolotion not supported" . No problem when a live CD (Linux) was used.


You might have changed the screen resolution or the refresh rate that your monitor might not support. So you better get into the safe mode by clicking the Function key 7and 8 then use the option called safe mode. After the windows starts log in ... Compaq MV 540 15" CRT Monitor

Emachine 15' lcd monitor


Hi,Your query - "can the monitor work with an older HP computer?"Normally yes, assuming that there is no hardware fault. The message is an indicator that somehow the settings of the display of the old HP computer does not mat ... E-Machines eMachines Monitor E15T4

My computer wont open windows


Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.


It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0117 seconds