Having problems with your ViewSonic VA703B LCD Monitor ?

Always says: Auto Image Adjust

\015 Hi there. I have ViesSonic VA703b and I have the following problem. Everytime I start a game which has resolution from 1024x768 to 1280x720 the image is lost and it's blurry and fuzzy and it always says Auto Image Adjust. I tried to lower my resolution, but it doesn't work. I donwloaded the latest drivers for my video card and monitor and directx and still no result. For example games like World Of Warcraft, Heroes 5, Desperate Housewives , don't work and it's always the Auto Image Adjust. Please help!\015

Answers :

These are the allowable resolutions and refresh frequencies for your monitor.\015\012\015\0121280 x 1024 @ 60, 75 Hz\015\0121024 x 768 @ 60, 70, 72, 75 Hz\015\012800 x 600 @ 56, 60, 72, 75 Hz\015\012640 x 480 @ 60, 75 Hz\015\012720 x 400 @ 70 Hz\015\012\015\0121280x720 is invalid but I see that you were having problems at 1024x768 which might mean the refresh timing was wrong.\015\012\015\012Make sure the monitor tab in the display properties (advanced) is correctly set with 'hide modes that this monitor cannot display' so that the display is locked to the valid frequencies and resolutions.\015\012\015\012If all else fails look at the game .ini configuration settings. You might be able to set a compatible mode there. \015\012Or run the game in a window.
Always says: Auto Image Adjust?\012 This trouble maybe power supply or inverter boards is defective.
\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
\012 if you have any question,please let us know email:[email protected],we sincerely hope we can help you!
\012 you can also check this boards whether suit you:
\012 ILPI 023 490731400100R Viewsonic 790681400711R Power Supply Backlight...
Repair Help & Product Troubleshooting for ViewSonic VA703B LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Always says: Auto Image Adjust


These are the allowable resolutions and refresh frequencies for your monitor.\015\012\015\0121280 x 1024 @ 60, 75 Hz\015\0121024 x 768 @ 60, 70, 72, 75 Hz\015\012800 x 600 @ 56, 60, 72, 75 Hz\015\012640 x 480 @ 60, 75 Hz\015\012720 x 400 @ 70 Hz\015\ ... ViewSonic VA703B LCD Monitor

Monitor flickering and adjustment buttons locked


If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down ... This may also cause a flickering affect.\015\012Distorted or skewed image on monitor.\015\012Issue:\015\012D ... Samsung SyncMaster 940N Flat panel Monitor

Screen monitor images on the righ side is not showig.


Hi afcarrillo,This could be a simple resolution problem. By that I mean that the resolution is set too low, therefore putting things off screen. Here's how you change the resolution:Windows XP Right click the Deskt ... Acer Computer Monitors

Hi I have been happily using my HP 2159m LCD monitor for approx 3 months now but I accidently pressed the "Auto Adjust" button & it moved the whole image down. (My start bar has disappeared) & no matter what I do, I just cant recenter it. I have tried adjusting vertical position in the image control menu but it doesnt even move. I have tried pressing the "Auto Adjust" button again, all to no avail. Its centers OK in different resolutions but, I want to use the recommended Resolution of 1920x1080


Friend,\015\012\015\012Reboot in Safe Mode. Go to Control Panel->System->Hardware->Device Manager->Display Adapter. Here select the display adapter and delete it. Then reboot the PC. Go again to the same Device manager and select Ac ... HP 2159M Monitor

Computer monitor my viewsonic 19" monitor shuts its self off no matter what computer i plugg it into ive tried 5 different computers and all it does is display the desktop for about 3 seconds then says auto adjust then the screen sought of distorts a bit and goes black and stays off, any ideas?


If one of those 5 computers has a working monitor,\015\012set the device-resolution to 800-by-600 and the refresh-rate to 60 Hz.\015\012\015\012Then, disconnect the "working" monitor, and connect the "problem" monitor.\015\012 ... Computer Monitors

Viewsonic VX2235wm Horizontal Image Problem


Tricky one. Have you tried using different dispay resolutions from your Windows Display Control Panel? \015\012ie 1200x1014, 1600x1400, etc.\015\012\015\012When you say you used the manual adjust, do you mean the horizontal sync opt ... ViewSonic VX2235wm LCD Monitor

Digital power saving mode


Check your monitor power settings.right click on your desk top then left click on 'properties' in the white box that appears.this will bring up a 'display properties' box which should have a tab headed 'screen saver' amongst o ... Gateway FPD2275W LCD Monitor

I have a ViewSonic Monitor, model number Vs11307. The screen is all blurred and the screen isn't adjusting properly. The screen is shifted to the right and I have a blank rectangle at the left side. I tried auto image adjust and manual image adjust, but nothing seems to be working as I want it to.


I had the same problem same model. The image was off center to the right and it couldn't be fixed by the auto-image adjust or the manual adjust. My solution was really simple, I moved a video player (RealPlayer) onto the monitor and max ... ViewSonic PC Desktops

Monitor message i cannot remove "processing auto config message from screen display"


The monitor is stuck processing the auto adjustment. This is a problem with the minotr itself only and has nothing to do with your computer having a problem.\015\012\015\012Unplug the monitor from everything and then turn it off, let it ... Gateway FPD1530 15" TFT LCD Flat Panel Monitor

I cant seem to work out how to use the OSD controls on the monitor of the LG Flatron W2242S. The screen has gone really dark and whenever i try to adjust it, it keeps saying 'processing auto image adjustment' but it doesnt do anything. What am i doing wrong?


... PC Desktops

LG Flatron W2242S OSD controls dont work


... LG 22" Widescreen Flat Panel LCD Monitor

Dim picture my dell e172fp auto adjusts shows a bright picture for a second, then once its finished, it goes to a very dim picture. it seems like a backlighting problem.


This is the way how to examine where the problem is. If the screen is going dark. You\015\012have to check that you can see the image on screen by shining a flashlight into\015\012the screen, not directly but find the best angle to the screen and tak ... Dell E176FP 17" LCD Monitor

We have a canon MP610 printer scanner combo, I work in a dentist office and am trying to scan a x-ray. When I do it is'nt picking up the detail very well at all. I think I need to adjust the settings but I am not sure how. I was hoping to get some assistants or some direction. Thanks Kammy Arment


The only way to get a little more detail out of this printer with x-rays is to INCREASE the DPI resolution. there are no other adjustments that are abailable.\015\012The Scan Settings dialog box opens when you click Specify ... PC Desktops

I have a Westinghouse LCM-22W2 LCD monitor. I believe my power board is bad. I want to either replace the power board or bad capcitors, if I can find them. I do not know how to take off the back cover, however. It almost looks as if a special key is needed in the lower left corner of the back cover. Does anyone know how to remove the back cover? Ed


Have you gone through the user's guide? There are some sleep settings and automatic adjustments that this monitor makes, and other changes that users have inadvertently triggered that seem to be causing quite a bit of confusion these days. Make sur ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

After first turning the computer on, the monitor screen image will sometimes display: off center vertically or horizontally, tinted off color, as lines, or not present at all. SOMETIMES pushing the monitor power on-off switch will produce the corect image. When this fails, disconnecting the power plug and reconnecting it once or sometimes several times will produce correct image so screen is fine and useable after the fussing with the tweaking proceedures described. I have tried changing the m


The screen should have a auto adjust feature. If you are using the Blue - VGA cable this may happen sometimes, it happens on my fully working asus monitors when I use a VGA cable instead of DVI.to adjust the screen or run a auto adjustmen ... Sony SDM-HS73P 17" LCD Monitor

Blinking As soon as i plug my monitor to thewall the LED turns green, but themonitor in blinking and it says auto image adjust, and I Don't Know What To Do


Hi,\015\012You may want to try lowering down the screen resolution of your display properties of your PC. If you can't set it properly or the monitor will not allow you to do so, try restarting in safe mode (press F8 when booting).\015\012Pls post ag ... ViewSonic VA720 17" LCD Flat Panel Monitor

I've been trying to use s-video cable to connect


\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

Compaq Presario 4410US Memory Upgrade Problem


Is it the motherboard telling you this or the operating system? Are you running windows 98 or windows 200? If the operating system is telling you this and you are running windows 98 then that could be the reason. Windows 98 seemed to have problems ru ... Compaq Presario 4410US (470027-053) PC Desktop

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Colors are off after auto adjust


I seem to have found the solution (and the cause, perhaps?) for this problem!I was having the EXACT same problem with a monitor I'm repairing for a friend. The capacitors on the power supply board were blown (CapXon capacitors, who'd've g ... AOpen 19" LCD

Reboots after every startup after SP2


Microsoft hotfix Q317277 causes this problem in the HP Pavilion ze1210 laptop. I had this happen with my ze1210. The way to fix it is to "flash the BIOS". (I won't assume you know what this means -- if you don't know, you're basically going to jus ... HP Pavilion ze1210 Notebook

The desktop background on my w17e monitor is skewed to the right in stretch and even in center position. nothing I do will move it back to center. Changing the resolution does not help either. Right now it is at 1440x980 as recommended. Please help Thank you


What you need to do is to get into the Display Adjustment menu. The menu will have two rows that each have 5 icons on each row. The icon you want is the one with the cross made of arrows. Highlight that and you will then be in the Image Positio ... HP w17e Monitor

Resolution automatically changed on startup


If your monitor is actually the Zenith 17" HDTV, the native resolution is 1366x768. You may be able to "force" this resolution using powerstrip. It is freeware and you can download it ... Computer Monitors

I am trying to burn a DVD that is 1 hour and 49 minutes long and it will not burn correctly. On a DVD-RW it only recorded just a small amount at the beginning and also had music in the background. I tried a DVD-R and it would not work at all. It also seems that the video file is larger than what the DVD can hold but I am using 4.7GB (2hours).


Make sure you treat your blank CD-R's with respect.\015\012Scratches or dust may cause write errors! Handle the disc carefully when transferring it to the CD drive!\015\012 \015\012 \015\012\015\012 \015\012DMA & Auto Insert ... PC Desktops

Multiple monitors, hp f1905 image auto adjusts to upper left corner


You are not looking for the driver for your monitor. You need the drivers for your video card. It is probably running with the defualt Vista drivers as well and needs to have the correct manufactures drivers installed.\015\012With the correct d ... HP f1905 19" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4072 seconds