Having problems with your ViewSonic Computer Monitors ?

Monitor says no signal - cords inplace - what do I check


Answers :

Try to hook it up to another computer to see if its gone bad.
Repair Help & Product Troubleshooting for ViewSonic Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

My lcd screen does not show images projected by the computer, when the RGB cord is unplugged it says check cable setting and when adjusted and it picks it up it still shows nothing


Good day sir/maam, there are several reasons why your LCD monitor acts like the one you say. but let us start with the common ones.\015\012\015\012check your PC if there is the video signal going out to your mo ... Computer Monitors

My monitor when powered up gives me a no input signal for VGA and DVI and then goes into sleep mode after 15 seconds. I plugged in a second monitor and have a no signal message too. Should i replace the video card or has the monitor locked itself out. Please advise....Best Regards Beth.


Hey BethSounds like you are in a bit of trouble!Based on what you've told me, it looks like it might be a video card fault. However, a few things to check first are..Make sure the VGA & DVI are secured tightly ... HP f2105 21" LCD Monitor

Montiors shut off


If the monitor goes into standbye when you plug it into the computer , it generally means there is NO signal coming from your video adaptor.\015\012Plug the old monitor in , if it works, ide suspect the new monitor(s) are not working correctly. ... Systemax Venture PC Desktop

I NEED HELP PLEASE!!!!!!! PROVIEW 19" MONITER.


Does the led on front of the monitor stay blue or does it become amber ?\015\012If it becomes amber, then you are not getting a signal.\015\012No harm in trying this : You can try to see if it is a contact problem.\015\012With the m ... Proview PL926WBi 19" LCD Monitor

RGB No Signal Message


First you need to check the cable at both ends, inside and out. Make sure it is plugged in, to the proper connector and that there aren't any bents pins. Now put this monitor on another computer, a laptop will do. Does it come on now? If so then ... Gateway FPD1975W 19" LCD Monitor

No signal on monitor


I had similar problem. I unplugged power cord to LCD, and re-plugged cord back. It solved the problem. Kind of cold-reset for LCD. I used DVI. ... Acer AL1916W 19" LCD Monitor

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

SIR, PLEASE GIV ME THE BEST SOLUTION FOR FOLLOWING PROBLEM WITH MY LENOVO 3000 Y410 LAPTOP (WITH XP AS O.S. ) ON MY [email protected] AS EARLY AS POSSIBLE. SIR, MY LAPTOP SCREEN STAYS BLACK AFTER TURNING ON IT.IT DOESN?T DISPLAY XP CD ALSO.


You can't even get into the BIOS. Hard drive failure?Here's what the manual say's about black screen.Verify that: The monitor cable is securely attached to the rear of the monitor and to the rear of the computer. The monitor ... Lenovo 3000 Y410 Laptop

Osd lock in my LCD


Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Gateway GT5220 PC Desktop

PC to tv VGA cord hookup. Installed but it said it has no single, will be used as main monetor. Workes but I ca'nt use my keybord to try to get single to tv. a1600n has onley one VGA port and nothing else for my tv to hookup to please help?


First idea to try: make sure the TV is on (saying no signal) before you turn on the computer. Several TV/monitor units will not respond if the computer is already on when the TV is turned on. Check that you have a good cable (they do fail) and well- ... HP Pavilion a1600n (882780776265) PC Desktop

My desktop will not turn on. Monitor shows no input. Fan in tower running very high. No lights on the tower.


In this case if you monitor say no input or no signal it means the monitor connector cord are not connected properly to the motherboard. Or if you have a video card you need to plug your monitor connector to the video card. Because if you a video car ... PC Desktops

Monitor stays blank power light blinking - Samsung Computer Monitors


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Samsung Computer Monitors

LG 700E monitor's power LED blinking continueously, no display


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG 500LC Monitor

My computer does not start up


Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

No Input Signal, Monitor Going to Sleep


If you have twisted od bent the cord to much the wires could have broke inside the cord. ... HP w1907 LCD Monitor

My hp w2207h goes to sleep


... HP Computer Monitors

Lcd montor not working help - Samsung SyncMaster 920NW Monitor


Hi there,\015\012Symptom : No images on the screen. I cannot turn on the monitor.\015\012\015\012Checklist 1 : Is the power cord connecte properly.\015\012Action : Check the power cord connection and supply.\015\0 ... Samsung SyncMaster 920NW Monitor

Just bought a new ViewSonic Monitor for my PC. When I turn on the computer the monitor screen says "no signal" - turning the blue light yellow. I've plugged the power cord in the back and in the wall socket as well as attaching the blue connector to the back of the monitor and the drive. There's also a cream colored connector that fits into the back of the monitor, but there appears to be no related place at the back of the drive. I put the CD in and still have nothing on the screen.


First make sure the num lock led on key board is link when you press it if it contant on then cpu is not give display.But if it is on/off when you press it then your cpu working fine.Then when you power up the computer press F8 key then e ... Computer Monitors

Alienware computer my computer and the monitor both come on and the monitor says "no signal detected" i have put in one new NVIDIA GEFORCE 8600GT but left one remaining graphics cards (has 2). turned it on and it did the same. i have checked all cords and made shure the monitor was plugged in all the way.....help?


Please try connecting monitor to known working CPU and determine if problem is with CPU (Graphics card etc) or monitor.Signal cable can also be a problem.\015\012Please rate solution and provide feedback.\015\012Samir ... BenQ FP71E 17" LCD Monitor

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

Emachines computer problem


Happens quite often to me also. My best guess for you is plug the monitor into the other jack it fits into. It will work with a reset. Also make sure that all cords are tightly plugged in. ... E-Machines eMachines Desktop PC
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6344 seconds