Having problems with your ViewSonic A91F+ 19 in.CRT Conventional Monitor ?

Got an old A91f+ with soft focus at all brightness and contrast.

\015 Got an old A91f+, where in the h*** is the focus control?\015

Answers :

If its blurry then monitors faulty.
Repair Help & Product Troubleshooting for ViewSonic A91F+ 19 in.CRT Conventional Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Got an old A91f+ with soft focus at all brightness and contrast.


If its blurry then monitors faulty. ... ViewSonic A91F+ 19 in.CRT Conventional Monitor

Toshiba desk-top screen is quite dim. why?


1. adjust the monitors brightness and contrast\015\0122. adjusting the brightness and contrast with your video card software\015\012\015\012if that fails\015\012\015\0121. decide if the monitor is worth the money to repa ... Computer Monitors

Non crispy display


Six to seven years is about the usual life of a picture tube, and then you start seeing signs of aging. Poor focus is one common symptom (the loss of crispness you noticed). There is an internal focus adjustment, but it usually can't compensate for t ... LG Flatron 775FT 17" CRT Monitor

Samsung 2253BW Color issues


... Samsung SyncMaster 2253BW LCD Monitor

Monitor going black


My HP f1703 is almost 3 years old and started having this same problem. My fix got the display to stay on. Don't know how long this fix will work. I set the monitor brightness to 51 and contrast to 41. You may have to adjust to your levels to your ap ... HP Pavilion F1703 17" LCD Monitor

Need help with Mitsubishi 15


Try pushing the contrast button, and then some of the other buttons once the contrast menu is up. To control those menus you use the buttons on the front of the monitor, not the keyboard and mouse. ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

Horizontal/Vertical Postion of Image on LCD Monitor


The controls for focus adjustment are on the flyback transformer, (that big black thing on the left hand side (usually) of the monitor with the thick red wire that goes to the CRT.) the flyback may have 1,2,3 or even 4 knobs on it. 3 of these would b ... Gateway FPD2275W LCD Monitor

The brightness/contrast menu keeps popping up and scrolling through the exit, brightness and contrast options. It is a Dell E173FP monitor. I have tried disconnecting and reconnecting the cables and powering off the base unit (with all cables disconnected) and the booting back up but no luck! Can anyone offer advise or will we have to buy a new monitor? Thanks


Try pushing the buttons for the brightness if it does the same thing you need to replace it, the buttons might be damaged already by pushing too hard or it got stuck.If this is just a new LCD monitor about 1 to 2 years old contact tech support ... Dell E173FP 17" LCD Monitor

LG FLATRON 915FT plus monitor OSD setting


1. clean the G4 wire.\015\012\015\0122. change the neck base.\015\012\015\0123. adjust the focus preset in LOT . ... LG Computer Monitors

My 19" L1916HW worked fine on Saturday, but when I turned it on Monday, the screen was faded and out of focus. I tried adjusting the brightness, contrast and the clock and everything made it worse. I then reset (using the menu reset) and it was even worse than before. Any suggestions? At this point the screen is so faded I can't use it. The LCD is less than 6 months old!


Try changing the display settings from the desktop just right click and select properties then change the display size and colors. ... Westinghouse 19" Widescreen Flat Panel LCD Monitor

Need help with Compaq MV5500 CRT 15 inch monitor


Hi there, your switch botton is failling, manual buttons on the front to adjust controls, do some switch test, replace micro botton switch. ty ... Gateway FPD2275W LCD Monitor

LG Studioworks 700E


It sounds like one of the capacitators inside the monitor is malfunctioning, these little things store a certain amount of necessary power and then discharge it when it is needed.  If it is malfunctioning, it could explain why it takes so long t ... PC Desktops

Compaq Presario R3000 dimmed LCD screen


If your inverter is good I,de say your backlight is going bad, I just replaced mine in a sony vaio and now it seams to bright. ... Compaq Presario Notebook

The Contrast screen pops on all the time


It looks like your UP button contact is demaged.\015\012SOLUTION is to insert a piece from your business card mostly above the button to adjust it down or up. It works fine. ... ViewSonic VX910 19" LCD Monitor

How to adjust the brightness and contrast of


Look you have to see or find the menu bootoms in the bottom of the scree or on the back left or right and you find them just + or - the menus the brightness and the contrast will be under your control ... ASUS MK241H Monitor

Cannot adjust the brightness and the contrast


Ali BhaiThank you for your queryTo rule out vga card issue, please can you try plugging the monitor into another PC, if it works in there then it is your vga card at fault and this will need to be replaced.I f howe ... HP L1940T 19" LCD Monitor

Screen So Bright I Can Barely See Anything...


Unfortunately the problem is the monitor has gone bad, more specifically and likely is the backlight which is used to light up the monitor. You could fix it by replacing the LCD, but you can get monitors cheaper than a replacement LCD so it wouldn't ... Computer Monitors

Sony GDM-F500R (G1 Chassis) has trouble turning on


Sometimes relay contacts get "sticky" from arc oxide corrosion whenever enough electricity is passed from metal to metal...in a perfect mechanical relay, the relay would be sealed in a vacuum. Try swapping relays to transfer the problem. If you can t ... Sony GDM F500R Monitor

Brightness automatically going low when the brightness is at 100


Hello, please make sure the magicbrite option is not set to "dynamic contrast" as this will change the contrast levels by itself, change the settings by pressing the down arrow touch key on the monitor, change it to any other setting, game mode is bl ... Samsung SyncMaster 2493HM Monitor

Screen settings I can't seem t get the screen settings right,if the left is fixed then the right is inwards contrast is set on 100,brightnes 50,h-centre 29,h-size 88,v-center58,v-size57,zoom-70,pincushion-80,trapezoid-63,pin balance87,parallelogram-39,rotation-48,recal 6500'k,user ccolar R-77,B-51, recall 9300'k degauss H-moire-30 . Please can you help?


Hello,You want to recall the factory settings. There should be an entry in your menu for this. Sometimes its clearly indicated as 'reset' sometimes it is a word that means much the same, such as 'recall'. The numbers you poste ... Acer AC713 17" CRT Monitor

Dell Inspiron E1705 monitor changes brightness


If you have your Dell driver disc have to uninstall the video adapter driver and reinstall it. Restart the laptop and observe if things still happening. No need to do an update for the video driver though on this regard. Or on the other hand try to d ... Dell PC Laptops

Screen So Bright I Can Barely See Anything...


The auto dimming circuit on the ccfl inverter is out.  Replace the inverter and it should cure your problem.  Seek adult supervision for this repair. Do not try it by yourself.\015\012\015\012srich ... HP Pavilion F1503 15" LCD Flat Panel Monitor

The screen has went into a very bright high contrast, I tried the brightness and contrast and gamma settings but nothing helped, I also unplugged the video card cable and the problem remained so does it sound like something that could be fixed or is it busted?


Hello,\015\012\015\012The issue you have is caused by a defective power supply.\015\012If you can solder you should be able to repair the monitor yourself.\015\012The problem is caused by blown capacitors on the power board. Go to our\015 ... Samsung SyncMaster 931B 19" LCD Monitor

LG Studioworks 700E


Seems flyback problem ,leave it to the repairman... ... LG Studioworks 700S 17" CRT Monitor

Power on - blank (black) screen


Disconnect the monitor signal cable from PC and switch on your monitor. It should show some logo with Red, Green and Blue colors with a message similar to "No signal". If so, your monitor is working fine. Sometimes if the brightness and contrast is ... Dell E152FP 15" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3662 seconds