Having problems with your Sony VAIO VGN-FS740/W Notebook ?

VGA out not working

\015 Trying to hook up my laptop to tv. I have a sony vaio vgn-FS740/w laptop. I have a VGA cable and when I hook it up and push function F7, the only two options I get are LCD only and setup. please help. thanks\015

Answers :

Try connecting any VGA device. I.e a projector.
Repair Help & Product Troubleshooting for Sony VAIO VGN-FS740/W Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When dvi plug is used screen gets funny bright colored lines


FIX for design fault of ASUS VW222u Problems with monitor using dvi while vga works fine.my ASUS VW222u had the same problem many are reporting after about 8 monthswith ... ASUS VW222U Monitor

DVI input on monitor not working


Contacted viewsonic about this issue- they suggested- have both dvi and vga hooked up to same machine. start with poweroff on both. power on monitor, then power on computer. when you see display coming from the vga, power off pc, then disconnect vga ... ViewSonic VX2025wm 20.1" LCD Monitor

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

Toshiba Satelitte VGA problems


Friend which problem you are facing it is because of three resons.\015\012 in toshiba genrally\015\012 1. after hit on windows vista for external vga you have to press FN+function key again where moniter or lcd symbol displayed.\015 ... Toshiba Satellite A215-S7422 Notebook

I am trying to hook my Eee 1000HE netbook up to my hdtv. I have 15 pin RGB cable but it doesn't work. Followed TV (Visio) directions, but it doesn't work.


More information would be helpful - what operating system are you \015\012running - XP or Linux? are you getting no signal at all? or just a \015\012picture and no sound? or vice versa?. What settings did you try?\015\012\015\012In the ... ASUS Eee PC 1000HE Netbook

Nothing on the screen at startup


If you cant get into the setup menu then I would think the monitor is defective,you did not state if you hooked up the monitor to a computer that has a vga port that works. ... LG 22" FLATRON LCD Monitor

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

HP Pavilion zd8000 PC Notebook Problem


Hello people! I have a solution for the resolution probleme, Please read.\015\012\015\012As all of us, I have the SAME probleme with the graphics.\015\012\015\012After having my computer crashed and out of warranty, (and after ... HP Pavilion zd8000 Notebook

I have 2 ibm thinkpads t40, on one of the systems the lcd inverter and screen get no power but when i take the lcd and connect it to the 2nd ibm tkpad it works fine, What would be wrong with the one lap top that the inverter wouldnt get power when the colling fan harddrive? again on one system base both lcds work fine, when i connect them to the seconf base the base turns on harddrive works and fan spins but no power to inverter board. how can i fix this


On the second Thinkpad laptop, that doesn't show a display with an LCD screen. Plug a VGA monitor into the VGA port on the back of the laptop. Hold the Fn key down, tap once on the F7 key (Toggle your display over to an external monitor) ... IBM ThinkPad T40 2373 Notebook

I've got a Toshiba Satellite Pro L300 that I'm trying to connect to my very old TV (16 years). I'm going through the VCR. I thought I could connect the laptop's VGA to the RGB port on the VCR, tune to the right channel, adjust the display on the laptop & poof --- big screen monitor. Well, no such luck. Any help would be appreciated. Oh, it go directly to the TV, I would need to convert the PC's VGA to coaxial. I thought it would be easier going through the VCR's RGB.


No that will NOT work, first the PC's VGA doesn't have any "Channel" Second you must install Drivers for said VGA card, and the card MUST have a TV out connector either SVHS, or Composite, video out, or as of late HDMI. You Cannot "Receive" a VGA, si ... Toshiba Satellite L300-EZ1004V Notebook

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

Screen flashes - PC Desktops


You have to check the data cable and the power cable of the monitor?Check the power is coming to the monitor ( You can check from the led bulb (with yellow color) in the front panel of the monitor IF it is ok You have to fit a ... PC Desktops

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

VGA doesn't work on my EMachines W2040


THIS TYPE OF PROBLEM IS CREATED SOME TIME DUE TO BIOS CONFIGURATION. GO TO YOUR BIOS CONFIGURATION ENABLE PLAY & PLUG DEVICES. ENABLE YOUR VGA TO INCREASE 64 BYTE.\015\012\015\012OR REMOVE BIOS BATTERY CLEAN IT AND INSERT LIKE SAME. OR SET YOUR JUMPE ... E-Machines eMachines Desktop PC

SYSTEM BOOT IS SOOO SLOW


The pc had two VGA one is opnboard and the other is a vga card,so i opened it aond took the vga card out and it worked with the original onboard;i then fixed the vga card back and it also worked.\015\012the problem was that a shoddy work was do ... Aspire Computer Cases

Nvidia 6200 gap graphics card not recognized under WIN XP


DId you hook up the secondaary power supply on the side a 5 pin 1/2 inch in width? ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

EMachine stopped displaying video (card not working, just mobo)


Hi there\015\012\015\012I would say it's the graphics card that's failed. You might get the same beeps for faulty card as removed card....\015\012\015\012Take it to a shop where they can test a compatible card, before they se ... E-Machines eMachines Desktop PC

LCD monitor screen blue


Either the VGA card or the monitor can not display the resolution correctly, so you need to get it back to where it was, this solution is for Windows users (not sure about other OSs), reboot your system and and get in the options start-up screen by p ... ViewSonic VA712 17" LCD Monitor

I have a ViewSonic VX2025wm who works for only 2 sec after going black when it's working with VGA. I ordered a cable for DVI to see if it works on DVI. my question: is the whole monitor damaged or just the vga connection? is there anything i can do to resolve it?


Nikoya69, If old known good vga monitor works fine with your pc, then monitor (VX2025WM may have problem with lighting-up and sustaining white light output from the 2 cold-cathode-fluorescent-lamps that enable you to see all the pretty colors on the ... Computer Monitors

Toshiba Satellite P200-156; Screen dead; external monitor 'funny'


Thanks for the awesome explaination\015\012\015\012The answer is that there are several causes of a dim display or the failure of a backlight to illuminate the screen. As most people are aware, inverter and backlight failure are the most ... PC Laptops

I have the same problem. "No Input Signal"


May be the power button get stuck when you pressing to switch on.just change the power button cable with reset button and see. also chek the **** aslo just remove it and clean it and fix it again. ... HP L1706 17" LCD Monitor

Not to computer saavy so please keep it simple. I have a Sony Vaio VGC RA840G desktop with 5.1 surround sound. Also have a Samsung LN46A850 S1F HDTV. Also a home theater system. This is hooked up to cable tv. I hooked up HDMI cable from cable box to HDMI port on tv. Picture and theater sound worked. Hooked up VGA cable from computer to VGA on tv. This was with a Gigaware USB powered VGA splitter. Ran a cable from headphone port on compter to audio port on tv ( next to VGA port). Put on a movie o


From the looks of the TV manual you have everything right, so it's very odd you're running into this problem.Have you tried swapping through the sources? I find with one of the TVs we have on display at work that any time I'm having some ... Sony PC Desktops

Monitor only works with DVI/VGA adaptor.


With the DVI connected press F5 or F8 when windows is booting up and choose to start windows in VGA mode. When windows boots up it should start at 640x480 in 8bit. This will allow you to change the resoloution to what your monitor can handle. The DVI ... Acer AL2016W 20" LCD Monitor

RESOLLUTION ISSUES OR GRAPHICS CARD UPGRADE?


Can you please put forth the problem in minimal words? ... HP Pavilion a6650f Desktop PC

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5202 seconds