Having problems with your Samsung SyncMaster 510N 15" LCD Monitor ?

Monitor black outs,displays set optimum resolution

\015 Monitor blacks out about 20-30 minutes after turning on.inspite of setting resolution and frequency the problem persists.\015

Answers :

Sounds like a setting problem in the power options, go to Start>Control Panel>power Options, then ensure your monitor stand by time is set to never.
Repair Help & Product Troubleshooting for Samsung SyncMaster 510N 15" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When booting up my windows is loading and then my screen goes black and come up with an error: recomended resolution is 1280x1024... how do I fix this?


Most probably your computer has a higher resolution or refresh frequencies set in Desktop Settings than supported by the monitor. It might be also, that you have previously installed a monitor driver for a different monitor model, and the computer is ... Samsung SyncMaster 710VT TFT LCD Monitor

Video problem on my Dell Dimension 4600 PC, HELP ASAP.


The resolution set by default when you load your graphics driver is outside the range of your monitors capability.\015\012\015\012try starting in safe mode then adjust your resolution to 640 by 480 then restart.\015\012if this works ... Dell Dimension 4600 PC Desktop

My acer laptop with windows xp will not allow me to select the optimal resolution for my samsung moniter. How do I fix this?


The Samsung SyncMaster 730b is a 17-inch analog and digital TFT-LCD monitor delivering crisp, clean text and bright, vivid colors. This display offers a 600:1 contrast ratio, 300 cd/m2 brightness, 1280 x 1024 resolution, 160/160 degree viewing angle, ... PC Desktops

Screen blacks out


OK you need to try this monitor on another pc so as to write off a faulty graphics card.\015\012\015\012If your settings on monitor match the pc and youve tried the auto settings button, there is a faulty lcd for replacement. ... Samsung SyncMaster 510N 15" LCD Monitor

Monitor black outs,displays set optimum resolution


Sounds like a setting problem in the power options, go to Start>Control Panel>power Options, then ensure your monitor stand by time is set to never. ... Samsung SyncMaster 510N 15" LCD Monitor

Monitor turns black and with a not optimum mode pop-up


Press F8 when you boot your PC, Then boot on SAFE Mode...Right Click on Desktop>>Properties>>>Settings>>>Advance>>>Check the Apply the New Setting without restarting.Click Apply then OK ... Samsung SyncMaster 740N 17" LCD Monitor

Samsung SyncMaster 713BM


I have the same monitor with same probelm. I dont know if this is problem with samsungs specific model but the only way to work is the follow.1. connect your pc to another monitor and set the resolution to 1024x768. ... Samsung SyncMaster 713BM 17" LCD Monitor

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Not optimum mode


This means your computer windows resolution is not display in the correct resolution which your samsung LCD will take. What you need to do it boot the computer in safe mode. (pressing F8 at start up and select safe mode) This should bring ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Using Ezdock and GridVista with my Acer Ferrari 1004


Just wondering if you have loaded drivers for the F20, There may be a conflict with that monitor until you install the proper software. Another thing is to go into your display setting and make sure that the correct display device is selected. You ca ... Compaq Presario X1000 Notebook

I'm trying to help a handicapped friend of mine with his monitor/computer problem. He has a Samsung 920 NW monitor. The computer boots up but the monitor immediately goes black. The blue on/off button on the monitor is not blinking. I can turn the monitor off then right back on and see the screen for about 1 second when the screen goes black again. Help?


Here's a good link to a troubleshooting guide for monitor problems that may help you to correctly diagnose the cause. Another ... Samsung SyncMaster 920NW Monitor

Black Bars each side of my new monitor wide screen


Right Click on an open spot on your desktop.\015\012\015\012If your Operating System is Windows XP, choose Properties from the menu box that pops up when you right click.\015\012\015\012A new window will open up. Click the Se ... HP W2007 LCD Monitor

I have a 913t monitor and about 3 months ago it started to go to a black screen with an error message "not optimum mode recommend 1280 x 1024 60 hz" any help???


Click START-SETTINGS- CONTROLL PANEL - DISPLAY - select the SETTINGS tab at the top - click onthe ADVANCED button (bottom right)- select the monitor tab- in the screen refresh rate dropdown box select 60htz- click on apply & ok - back at the disp ... PC Desktops

Monitor out of range when a game is booted up


The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

Monitor receiving signal, but no image


Same problem with the same model "acer" monitor. 3 yrs old. Was told after I purchased it that they were junk. Guess so. Won't be buying another. ... Acer AL2416W Monitor

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Viewsonic VA712b 17 " flat screen monitor


Realheadache, \015\012\015\012Unusual problem, it could be the resolution and refresh rate setting your PCs video card is currently set at. I don?t know if this will fix your problem but its worth a try:\015\012\015\012- Now go to your PC with the ol ... ViewSonic VA712B 17" Flat Panel LCD Monitor

Screen turns black and blue LED is blinking


Sounds like the monitor is being made to show a resolution it does not support. Check the available resolutions the monitor supports and then check what resolution the video card is giving, if it not compatable, you get the black and blue screens. ... LG Studioworks 563N 15" CRT Monitor

Having the same problem as others, my 912n monitor is a black


The problem seems to be that the computer, do not recognize “which monitor’s connected?” Follow these steps to correct the problem: Shutdown the monitor, next shutdown th ... Samsung SyncMaster 912N 19" Flat Panel LCD Monitor

Text/picture shadow Recently I've noticed what appears to be a shadow appearing mostly with text but in some picture as well. It makes the screen look a little blurry. It's not bad but just enough to irritate me. Any suggestions?


Hi rustybob,I have a solution for ya, but there are a couple of variables that could be involved. I assume it's an LCD monitor? How many inches is the viewing area, and what model is it? When you look at an LCD monitor, you pay attention ... Gateway FPD2275W LCD Monitor

Resolution Issue "Not Optimum"


Hi Guys.\015\012I have had this problem and after a bit of searching found that it is a known problem.\015\012Give Samsung a ring and if it's in warranty they will replace it ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

I need possibaley free driver my computer is only reconiseing it as a plug and play it is a gem gl-715a 15"tft flatscreen lcd did drivers even come with the monter cuse i got this from a thrift store please help


The monitors have a special way of communicating with the video card, and informing about their capabilities (accepted screen resolutions, refresh frequencies etc.). This is how "plug and play" monitors work, so there's nothing bad in it being recogn ... Scanport GL 715A 15.1" Flat Panel LCD Monitor

HP W1907 Monitor goes black after resolution change


Hi and welcome to FixYa,A couple of ideas you can explore/try:\015\012\015\012temporarily replace the HP W1907 with another monitor. The purpose is to determine if it is a monitor issue or vi ... HP w1907 LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5971 seconds