Having problems with your Samsung 94V 19 inch LCD Monitor ?

Samsung Samtron 94V N Screen setting problem

\015 My Samtron 94V constantly shows a change PC resolution box and although the PC is set as requested the setting request still remains, any ideas?????\015

Answers :

I found the Problem, its a fault in all of these LCDs.\015\012\015\012The Powersupply is overheating!\015\012Once it cools down it works again. I've gone and built an 80mm fan into the LCD. After testing the LCD dissasmbled and with a 120mm fan I found that as soon as I held the fan onto the PSU a few seconds later the picture would come back. It's probably unstable voltages. But if it's cooled, all is ok.
I have the same problem with my 94V monitor, It always shows the box with the resolution, and often I can use my PC with TV display.
\015\012But the strange thing is, that I use this monitor for about 3 years, and I never had such problems, just int he last couple of months.
\015\012My monitor is still under warranty. Have a chance to repair or replace it with a new one?
\015\012Pls, help
Repair Help & Product Troubleshooting for Samsung 94V 19 inch LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Samsung Samtron 94V N Screen setting problem


I found the Problem, its a fault in all of these LCDs.\015\012\015\012The Powersupply is overheating!\015\012Once it cools down it works again. I've gone and built an 80mm fan into the LCD. After testing the LCD dissasmbled and with a 120mm fan I fo ... Samsung 94V 19 inch LCD Monitor

Samsung samtron 55v display problem


Assuming that u r a professional..i guess there is no problem with ur monitor, it sounds like itz due to graphic adapter..either the adapter on ur system main/mother board/agp/pci/pcie is damaged or itz simply 'driver corruption'..don't p ... SAMTRON 55V 15" CRT Monitor

Monitor Samtron after 10min. looses contact with computer


This problem is caused by the Novatek chip on the video board. Soldering a 50 Ohm Resistor across pins 5 and 6 of this chip resolves the problem on both the Samtron and the Samsung monitors. I have just corrected one of these last night by this means ... Samtron Computer Monitors

Samtron 95P CRT Monitor


This caused by one or more capacitors on the horizontal circuit ... SAMTRON 95P 19" CRT Monitor

Samsung sync master 510 monitor display problem


It may be that the LCD monitor will not display all screen resolutions\015\012so you may need to change your resolution to match the desired\015\012resolution and refresh rate of the LCD. In your case the computer\015\012should be outputting: ... Samsung SyncMaster 510N 15" LCD Monitor

Monitor not working


You will need to change the display settings for the type of lcd monitor you have, it is a wide screen I am assuming, you can change this by right clicking on the desktop select properties then settings the screen resolution should be on the middle l ... Computer Monitors

923nw samsung resolution problem


On ooptions screen, click box that says only show settings the monitor can handle. Then try changing the horizonal and vertical settings on monitor to match it up with your settings.On your windows main screen, right click, then propertie ... Samsung 923NW 19" LCD Monitor

940mw - Compatibility


First thing i would check is your settings. See if windows is reconizing two monitors. If not then you will need to tell it to find it. Hook up your second monitor goto add new hardware and see if windows finds it. If it doesnt find it then i would g ... Samsung SyncMaster 940MW 19" LCD Monitor

Problem with Control Panel


It sounds like theres a front panel button that has become intermittant and making contact all by itself. Sometimes when you clean the screen, the cleaner will drip down between the crt face aqnd the cabinet and make the switch in front go bad. Im no ... SAMTRON 55V 15" CRT Monitor

Screen resolution problems


When I rang Samsung about the problem, they took my details and sent a new monitor within a week even tho my monitor was 18 months old ... Samsung SyncMaster 713BM 17" LCD Monitor

Problem with Samsung SyncMaster 226BW


Click the top button on the side of the monitor to open the monitor's settings. In the "Picture" Settings, scroll down to "MagicBright" and open those settings. Chances are you have it set to "Dynamic Contrast". Switch that up to any of the other ... Samsung 226BW Monitor

Movie on monitor


Hi,\015\012\015\012Normally I would suggest that you first lower your laptop's screen resolution, refresh rate and color quality and verify that you have enabled the external monitor or dual view in your Display Property Settings as well as the Fn ke ... Samsung 226BW Monitor

I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the monitors screen comes alive for 2 to 3 second and after that its goes to blank.


Try to do this: Just before the Windows start up screen (after the bios loading) press F8 and log in at safe mode settings. If at this mode you can see your screen change the resolution settings at a lower set. Save and reboot normally. Now try step ... CTX S762A 17" LCD Monitor

My inspiron 9300 lcd screen displays a dark screen with a dull image in the background.a new screen and inverter was put inplace but the problem remains the same. When hooked to an external monitor the display is ok. What can I do to correct this problem.


. It has an antiglare coating that gives it a\015\012dull shine when turned off. On a reflective screen like or Dell\015\012screens with TrueLife you'll easily see your reflection with the screen\015\012powered off. The coating is not annoying ... PC Desktops

Screen settings problem


OSD = On Screen Display. Once loaded it is normal for the OSD to stay on your screen untill it times out or you Exit it. ... Samtron MONO TTL 13 Monitor

Freeze and black screen after re-boot


Go into bios screen and set the settings to optimal default and save then try again. if this gives you no results try f8 at the windows starting screen and safe boot if this allows you to enter window in safe mode your problem is outdated drivers. tr ... PC Laptops

Benq FP737s - Not working suddenly - Black screen


\015\012Disconect the screen from the computer, after you have to see the no signal sign on the screen.\015\012If you see the sign check the setup setting and the video card.\015\012If ... BenQ FP737S-D 17" LCD Monitor

Monitor cold start issue only as #2 monitor


The start up problem is common and will only get worse. Call Samsung as these monitors have a 3-year warranty. No receipt? They will accept your word regarding your purchase. I have\015\012two that failed exactly the same way. I called 1-800-SAM ... Samsung SyncMaster 931B 19" LCD Monitor

Samsung SyncMaster 713BM


I have the same monitor with same probelm. I dont know if this is problem with samsungs specific model but the only way to work is the follow.1. connect your pc to another monitor and set the resolution to 1024x768. ... Samsung SyncMaster 713BM 17" LCD Monitor

Samsung syncmaster 953bw


Oct 23, 2009- This is how it went for me..I have a Samsung SYNCMASTER ... PC Desktops

Samsung syncmaster 245b plus


Oct 23, 2009- This is how it went for me..I have a Samsung SYNCMASTER ... Samsung 226BW Monitor

Problem In Control Panel


Near microprocessor change c945b transistor, this may help u ... SAMTRON 55V 15" CRT Monitor

Sound problem I have an ACER Veriton M464 with a Samsung SyncMaster 920LM Monitor. I have no sound at all coming from monitor, yet it works OK when I plug in speakers to PC. Just replaced monitor recently due to another problem and same thing....settings must be wrong somewhere.....


On you screen there are button, which you can change settings on your screen itself , go to the volume control, and just set your volume on your screen higher, note: not on your pc, but on your screen itself.. enjoy the sound ... PC Desktops

Samsung Samtron 15" screen shinked both side horizonatally. All the Resolution settings are fine. But the problem is still ther. Pls help


Moniter male port are been damaged, so i want to reconnect the cable. Now i want a color coding ... SAMTRON 55V 15" CRT Monitor

Screen not coming on


Typical problems with Samsung SyncMaster.\015\012\015\012I just did this to a friends monitor as well, a different model and not much different in build. I think you might have 3 screws on lower back side of cover. Start your separation f ... Samsung SyncMaster 743B 17 inch LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8094 seconds