Having problems with your Saitek ST220 (J-30U) Joystick ?

ST220 Joystick calibration problem

\015 I just bought a game for Windows 2k that needed a joystick, so I brought out my dusty, old ST220. I plugged it in, and ran the "setup.exe" file that was on the floppy that came with it. Thinking that everything was solved, I started the game, but the joytstick didn't work. I quit the game, and went to "Game Controllers" section in the Control Panel. When I went to calibrate the device, the "plus" sign was moving around eratically even though I didn't even touch the joystick. I've searched Google (which didn't turn up a lot of results), but to no avail. Any help will be appreciated.\015

Answers :

Your joystick contacts make that +cursor to make a crazy movement. You should replace that rubber contact on your joystick.
Repair Help & Product Troubleshooting for Saitek ST220 (J-30U) Joystick

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

ST220 Joystick calibration problem


Your joystick contacts make that +cursor to make a crazy movement. You should replace that rubber contact on your joystick. ... Saitek ST220 (J-30U) Joystick

When I bank right or left with joystick the screen Freezes


To check the joystick isn't the problem, go into control panel game controls, then check that the joystick appears and you can move the cross-hair around on screen, most modern joysticks areauto-calibrating, but you could try running the calibr ... Logitech Extreme 3D Pro Joystick

I need calibration software for the logitec 3d pro joystick. will not maintain level flight in AP (flight sim ).


This was not originaly my post but i saved it.and it worked for me.\015\012 \015\012HOW TO CALIBRATE THE LOGITECH EXTREME 3D PRO JOYSTICKI just figured out how to calibrate this joystick. I am using Windows XP. I assume it will work with all Wi ... Logitech Extreme 3D Pro Joystick

Saitek aviator joystick av8r-01


Saitek aviator AV8R.I have a problem with y axis, it's not on the centre. I tried calibrate my joystick, but no chance. I reinstalled my joystick and a first time was ok, but bery short. This is a big problem for my flight simulator! How can I ... Saitek Aviator AV8R Joystick

Logitech Cordless Rumblepad 2 connection problems


 The 5 + 7 buttons work for teh OLD versions that take FOUR batteries and have the RED Logitech logo.The New versions, which use TWO battreies has an ORANGE logo use buttons 6 + 8 to reset sticks.Whatever postition the sticks are in ... Logitech Cordless Rumblepad 2 Vibration Feedback Gamepad (GAMELOCRMBPD2)

Serial joystick I've purchased an older Dell Pentium I and put a ISA SB16 card with gameport in the PCI to ISA bridge slot. Windows 95 recognizes with card and game port and software for the joystick enables me to use the joystick in Windows 95 (highest operating system available at the time) environment to calibrate. Problem exists when I try and use the joystick in true dos mode after reboot with popular game loaded Wing Commander's Privateer 2. I am using a boot disk but I am concerned that p


If you have Windows 95/98 its best to run in pure DOS mode \015\012 by selecting Start -> Shutdown -> Restart in MSDOS Mode. Don't use the bootup disk..Sound Card also has to have DOS Drivers for it's Game Port to work. Check Manuf ... Microsoft SideWinder Precision Pro 2.0 Joystick

Calibrate saitek aviator


... Saitek Aviator AV8R Joystick

Logitech zero calibration reset method


Have you tried using the Logitech calibration uninstall tool that erasers all joystick calibration from windows.Download and run the Logi ... Apple Logitech Freedom 2.4 Cordless Joystick (T6050LL/A)

Logitech Wingman Extreme Digital Calibration


... Logitech WingMan Extreme Digital 3D Joystick

I recently purchased logitec extreme 3d pro joystick and a user manual did not come with it. How do I get one?


Did you purchase it open-box or second-hand? If so, you shouldn't be surprised at the lack of a manual. If you bought it new, it may not have come with one. I personally have one of these joysticks, but I bought it so long ago that I can' ... Logitech Extreme 3D Pro Joystick

Callibration problem? Main stick (although in middle) is actually all the way over to the right. On callibration, the cross is at the very right of the screen and during gaming, helicopters etc fly right (round in circles). Partners joystick, wanted it working for when he gets home (if possible).


Disconnect the joystick for a few seconds and reconnect .Keep the stick centered when you do this.\015\012If that doesn't work, try the Clear Calibration Utility. Download it here if it's not on the CD that came with the stick:- \015\012\015\012http: ... Logitech Extreme 3D Pro Joystick

Extreme 3D Joystick for MacIntosh - Missing Install CD


I have also a Mac and a Wingman Digital 3D joystick. No installation was required, just "plug-and-play". BUT in order to calibrate the joystick, you must do this from within your game software. In my case is this X-Plane 9.70 or 10 (I keep both but o ... Logitech WingMan Extreme Digital 3D Joystick

Can't calibrate joystick


... IGN Entertainment (G60503A) Joystick

Joystick Hey, hows it going? Did you get the latest link I posted for you to the download? any problems with the setup?


Hey , i got the link went to the web page , followed the instructions the best i could . I downloaded the logitech program or whatever and went through a few steps , but when it said click on the device to calibrate it didnt show any. I dont think my ... PC Game Controllers

How do I configure Fighter Ace 3 5 for joystick


... Jaleco Fighter Ace 3.5 Online for Windows

X52 calibration From time to time the joystick loses calibration and dosnt center as it should. I cannot find a calibration mode to reset it, and have to resort to turning off the p.c. and rebooting to get it centered once again. What am I missing?


Have the same problem with my X52; cant get the rudder control (twisting control) work fine, but it goes on its own way to the right and can't be calibrated no way. this is my 3rd SAITEK X52 (2 X52PRO, 1 X52), and all I can say is: SAITEK IS THE WORS ... Saitek (PS28) Joystick, Throttle

Ts290 Pro joystick not working with Wondows XP game


Gidday , It is probably not compatible with Pacman. I suggest trying it with a flight sim or some racing game to see if indeed it is working . But if you have installed it properly and it works in the calibration stage it should work in racing,fligh ... Saitek ST290 Joystick

X-axis trouble I cannot calibrate the X-axis of the joystick. The Y-axis is no problem, though the x-axis doesn't move at all!


I had the same problem with my X52 and searched high and low on the internet for a solution. What I did was pop the base off and found a loose connection on the x-axis wires. I re-routed both the x and y axis contact wires underneath the p/s2 port ... Saitek (PS28) Joystick, Throttle

Do I need a driver for wingman attack 2 on Windows XP, I can't get it to work. I'm very very new at this.


<<The windows drivers will work the joystick....just have to go to control panel, game controllers and enable and calibrate the joystick.>> Thanks Chip!!! that helped me. windows 7 includes a game controler driver that works for thi ... Logitech WingMan Attack 2 Joystick

Why did the Y-axis stop working?


Same happened to my joystick, it happened when i put the drivers for it on, then i deleted them and it fixed it. Them the Y axis just stopped about 2 weeks later.... ... Apple Logitech Freedom 2.4 Cordless Joystick (T6050LL/A)

Rudder doesn't remain centred


Meanwhile the solution is EASY.\015\012I had the same problem after a year or so. Trying to steer to the right, no response. Couldn't get worse, so i had to buy a new one, that gave me the possibility to experiment. This is what i did, and it w ... Logitech Extreme 3D Pro Joystick

I have Microsoft Flight Simulator X and a Satek X52 flight control, however I have problems with the throttle on all aircraft. I have to use the F-4 key - can you help?


You need to assign the throttle function correctly WITHIN FSX settings area itself. Also calibrate the joystick in windows first. If you are not familiar with assigning FSX functions to your joystick, check the Learning Center section within FSX for ... Microsoft Flight Simulator X for Windows

I have just now purchased a new logitech attack 3 joystick


For checking its full functionality follow the procedure.\015\012Go to:\015\012->control panel\015\012->game controllers\015\012There u can see USB GAME CONTROLLERS or some name.\015\012Select the controller & go to its properties.\015\0121.) on ... Logitech Attack 3 Joystick

PC BOMS OUT AFTER ABOUT AN HOUR OF FLIGHT OF FLIGHT SIM 2004


I think the change of joystick is coincedental. Sounds like the PC itself has developed a problem such as overheating due to fan going bad or a power supply/hard drive fault. The game is obviously stressing the computer to the point where it's suffer ... Logitech EXTREME 3D PRO TWIST HANDLE JOYSTICK USB (VG3DPROTWISTJOYSTICKUSB)

Thrust in FSX won't reach higher than 55% even with lever at full


This is either a calibration error, or a faulty stick. Nothing else can cause this. make sure you have the latest drivers installed or one's that it came with. Some operating systems will see the stick and load generic drivers which sort of work, ... Saitek X45 Mouse, Joystick
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5748 seconds