Having problems with your Proview PL913B 19" Flat Panel LCD Monitor ?

LCD Monitor goes off after 2 sec.

\015 Hi, I have 19" Proview LCD monitor PL916s that goes off after 2 sec. working. The green light stays and I can see dark pictures in high contrast mode. I've found four (of 6) bad capacitors, and replaced all six. The problem still the same. What else could I check?Thank you in advance\015

Answers :

LCD Monitor goes off after 2 sec?\012 This trouble maybe power supply or inverter boards is defective.
\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
\012 if you have any question,please let us know email:[email protected],we sincerely hope we can help you!
\012 you can also check this boards whether suit you:
\012 AI 0088 Proview 860 ALZ M713W Power Supply for PL916S
Check all cracked solder joints and resoldered and check two smd transistors near the inversors good luck
Repair Help & Product Troubleshooting for Proview PL913B 19" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello, A family member gave me a CTX S760 17- LCD Monitor. When I hook it up and start my PC the screen looks GREAT for about 15 sec or so and then goes black. Same thing will happen if I power off the monitor with the PC on and then power up the monitor, after 15 sec or so it will go black. Any info would be helpfull. Thank you Chris


Christoph972, This really sounds like a SMPS going into SHUTDOWN MODE after detecting a fault in the "cold-cathode-fluorescent-lamp" electronic ballast circuit which is called an INVERTER CIRCUIT, or it has a problem all by itself. The big question i ... CTX S760 (Beige) 17 in. Flat Panel LCD Monitor

LCD Monitor goes off after 2 sec.


LCD Monitor goes off after 2 sec?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have ... Proview PL913B 19" Flat Panel LCD Monitor

Acer AL1711 LCD Monitor goes repeatedly black after bootup after just a few secs picture and has to be turned on & off at least 6 times thereafter with picture staying only 2 secs each time until picture stays permanently. Same thing when connected to a different computer but had to use the same monitor cable each time.


Cpburn, It's BROKEN!!! SHUT IT OFF AND LEAVE IT OFF!!! The "switch-mode-power-supply" has DETECTED a fault and then goes into full or partial SHUTDOWN to save itself from a catastrophic, nonrecoverable failure. eg. sparks, smoke, fire. The good news ... Acer Computer Monitors

Monitor problem i have a mag innovision monitor, it comes on for 1 sec. and goes off and in about 3 to 4 minutes come back on for 1 sec. and goes back out.


My monitor is 17'' lcd...... mag innovision model: LT716s..before was working well but now the lcd monitor don't to turn or either the led doesn't turn or make any sign.... no matter whta the lcd stay blak,,,,,do not want to turn on.... ... Mag Innovision LT976S 19" Flat Panel LCD Monitor

Want to use samsung 2233SW LCD monitor as TV


Even still it is not working for me ... Samsung SyncMaster 2233SW Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Samsung Synchmaster 940N fault


I've had the same problem with mine and just fixed it (well, it's still working now, so fingers crossed).The problem is the high-voltage supply to the backlight is breaking down due to a discharge path somewhere.I took my moni ... Samsung SyncMaster 940N Flat panel Monitor

LCD display Proview


You need to contact Proview. It is a problem with the monitor. I had the same problem and I was lucky. The warranity was going to run out in 15 days. They sent me a return number "I had to pay shipping and insurance" and they sent me a replacement ... Proview PL926WBi 19" LCD Monitor

LCD Monitor turns blank after 1-2 seconds


Yes, this is a very common problem. Often times it is the inverter capacitors that wear down (they look like small batteries with a white stripe and are close to the transformers). If you can get in to the circuit boards, these capacitors are often v ... Computer Monitors

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

Samsung SyncMaster 215tw screen goes black after about 1 sec.


I have the same problem its defenitly a problem with the lcd monitor not with the graphics card nor the pc. I hooked up the digital and afterwards the vga connection both had the same result. 1 s perfect screen all visible but than black. pushing the ... Samsung 215TW SyncMaster 21" LCD Monitor

Satellite A25-S279 screen flickers and goes blank after 5-10 secs


Are you getting image on your LCD while booting up in the bios and windows loading screen ?if yes, then perform a windows installation. ... PC Laptops

VX724 monitor contrast keep resetting


... ViewSonic VX724 17" LCD Monitor

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

Liquid Video monitor goes black after 30 seconds


I acquired one of these at a flea market. Same problem, same solution as skotkolr's. The "runs for 30 seconds" or cycles on and off is caused by the run capacitor for the switching power supply controller IC. It's usually 47uF/25V and can be found on ... Computer Monitors

LCD display Proview


The power inverter is the problem and the only way to fix it is to replace the board. It was a poor design and my Proview 19" experienced the same screen issues as those previously stated. You'll pay $25 for shipping and up to $65 in repair costs. ... Proview PL926WBi 19" LCD Monitor

Flat Panel LCD Monitor goes dark for 2 sec then back on


Sounds like the backlite bulb is failing. best thing to do is to take it in and have it checked if is worth the cost. some can be replaced, some cant. ... ViewSonic VA712B 17" Flat Panel LCD Monitor

Acer AL2017 20 inch LCD Monitor comes on for 2 sec during start up then goes black. I 've had it for a year now. During start up it comes on 2 sec goes black then as the start up continues comes on 2 sec goes black. Any solution WAZ


Hi\015\012I repair monitors\015\012Based on other models , it sounds like you are having a powerboard-inverter issue.\015\012It just so happens that I hjust got one in that's doing that, I should\015\012know in a day or two (maybe s ... Acer AL2017 20" LCD Monitor

Monitor is blank/black


It is probably the inverter board inside the monitor.(if the screen does properly display ever then it is not the screen)It CAN be fixed but I do not suggest anyone open up a monitor (LCD or CRT) who is not "technically inclined." I ... Star Logic 17" LCD Monitor

GATEWAY 2275 LCD MONITOR WENT OUT, WHEN PLUGGED


This could be due to a bad power supply inside the monitor witch is replaceable for like $25 bucks all you got to do is unscrew off the back undo a few cables and put in the new supply.\015\012\015\012I hope this helps you in the repaire ... Gateway FPD2275W LCD Monitor

Sansung monitor going black!!


Hello, I have done some research about your product. If you have checked all the cables and connections to make sure the pins are not bent and cables are connected properly, etc. You stated that you hooked the monitor up to a different comput ... Samsung SyncMaster 216BW Monitor

My monitor shows a blank screen .But when I press the RGB, DVI button, I can see my desktop for a second then it stops displaying. I have to keep pressing the button to change the display type in order to see any screen, but it only lasts for a second between button pressing.


Moneyshaker, Maybe your screen (LCD panel) is not blank, just BLACK!!! First thing to do is the flashlight test! With monitor connected to a KNOWN GOOD fully booted pc with WIN-desktop showing, reconnect N9 lcd to pc. Then and only then turn on N9 lc ... Scanport N9 19" LCD Monitor

Backlight goes off after 2 sec on LG L1710S LCD monitor


Just took mine apart for the same issue, looks like mine is shutting down as only three of the four back lights are working ... LG Flatron L1710S 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4827 seconds