Having problems with your Proview PL713S 17" Flat Panel LCD Monitor ?

When energized, screen stays on for about two seconds then blanks

\015 Pl913s is plugged into HP Pavillion Computer. Repeatedly we disconnedted Video cable; the Green Power Light stays on when energized, and the NO INPUT dialogue boxes comes on then goes off when source is removed. I replaced PL with my old monitor and I'm doing this task. I took monitor back to Staples and we plugged it in and each time the screen came on for a moment then died to black. The system has been in my possession approximately 2 years and five months. Is there a warranty fix for this or am I on my own.\015

Answers :

Hi...there,
\015\012Well, it's seems your monitor backlight inverter are bursted. Usually, the monitor had a 1 year for the screen panel and 3 years for parts and labors. You're still under warranty, send it back to manufacturer for repaired.
Repair Help & Product Troubleshooting for Proview PL713S 17" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

When energized, screen stays on for about two seconds then blanks


Hi...there,\015\012Well, it's seems your monitor backlight inverter are bursted. Usually, the monitor had a 1 year for the screen panel and 3 years for parts and labors. You're still under warranty, send it back to manufacturer for repaired. ... Proview PL713S 17" Flat Panel LCD Monitor

Screen displays fine for a second, then goes blank


Dor, BenQ has a 3yr warranty on their monitors. I would contact their tech support and receive an RMA to return it for repair. It will cost you shipping out there but they will ship it back. I has a BenQ FP731 myself and it blew a capacitor inside ... BenQ FP737S-D 17" LCD Monitor

Monitor displays breifly then goes to blank screen


The green power light indicates that the monitor is receiving from the\015\012computer correctly. I suspect it is going into high voltage\015\012shutdown. There is a safety circuit that monitors the high\015\012voltage and shuts the monitor down if ... BenQ FP731 17" LCD Monitor

HP Pavilion dv 9205 us tries to start up, screen stays black


THIS IS A LONG REPLY POST BE WARNED : HOWEVER IS LIKELY HELPFUL TO OTHERS WITH INTERMITTENT LCD / PORT ISSUES. MY STORY,... Hi all. Ok, i'm gonna chime in here on this. I have the HP DV9205us and i've returned my unit a total of three times. Ultimate ... HP Pavilion dv9205us Notebook

Monitor displays breifly then goes to blank screen


Well my Acer AL1711 finally gave up in as much as the screen flashed briefly at switch-on then went blank, regardless of brilliance setting so I decided to take it apart and try to fix it. The good news is that IT WAS NOT THE LAMPS that I feared in m ... Relisys RLT1720 17" LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

My Acer Aspire 5610z laptop picture is breaking up + going blank


Replace the screen, you can download the pixel tester softwar to figure out if the screen is going bad. I'm pretty sure it is.\015\012\015\012If you change the inverter its either the onboard video card on your laptop (usually not replace ... Acer PC Laptops

Monitor displays breifly then goes to blank screen


The power -inverter board probably needs an overhaul.\015\012I redo many of these.\015\012If the screen was pinkish or flickering before it finally got to this point, it is possible that a bulb has gone bad.\015\012Fran ... Proview PL926WBi 19" LCD Monitor

Pavilion f1903 silver goes blank seconds after turning on.


The monitor you have has bad components on the circuit boards inside.This is a classic problem with all LCD monitors.I rebuild them on a daily basis so I recognize the symptoms.I would suggest finding someone who can do component le ... HP Pavilion F1903 19" Flat Panel LCD Monitor

W1907 Monitor Goes Blank


If you still have this monitor type, you are obviously no longer under warranty and need some help, not "smart alek" or "return" it advise.The issue is with the power board that feeds the inverters which in turn power the CCFL bulbs. This mon ... HP Compaq WF1907 Monitor

Blank Screen My IBM L170 comes on for a second, then goes blank. If I unplug the power and then re-plug it in it will work for about 5 seconds, then go blank. If I keep turning it on/off it will eventualy come on and stay on. When the screen is blank, close inseption shows the display to be there but almost totaly dark. Ive checked the PBC and found 1 16v 470uf capacitor bulging, and have replaced this and another 1 of the same value. Another 16v 1000uf looks to have a very slight bulge but my l


Any bulged capacitor is a failed capacitor. The nice-looking ones next to the bulged ones have failed too since they are in the same circuit.The real fix is to replace ALL the Electrolytic capacitors. You can use ones with slightly higher volta ... IBM ThinkVision L170 17" LCD Monitor

Monitor displays breifly then goes to blank screen


Hi this is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After going blank, you\015\012check that you can see the image on the screen by shining a flashlight into the\015\012screen, not directly but ... Gateway FPD2275W LCD Monitor

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

Monitor displays breifly then goes to blank screen


I am not familiar with your particular model, but I do know what the problem is.\015\012The inverter that runs the lights behind the screen is faulty and needs to be repaired. The lights shine from the top and bottom and reflect outwards throug ... Sceptre X7GNAGAV 17" LCD Monitor

Monitor displays breifly then goes to blank screen


Try booting up your CPU again, while on its process of booting press F8, then select (something MODE), okay, then when you are at windows environment go to control panel, select display, set your display settings its default or 900 by 600 pixels sett ... Dell Dimension 4600 PC Desktop

Monitor displays breifly then goes to blank screen


There is just no way you will be happy to hear it needs service or replacement under warranty.Worldvet ... Relisys RLT1720 17" LCD Monitor

Laptop does a long beep, followed by two short beeps.


One long followed by two short beep IS a video error. However, your model laptop does not have a separate video card. The only fix is to replace the mother board. ... PC Laptops

Black Screen and Beeping on turning on my Laptop


The beep codes that you have mentioned are concerned with the video card of the computer. It indicates that your computers video card has gone bad and needs to be replaced with a new one. ... HP Pavilion dv6000z Notebook

Monitor displays breifly then goes to blank screen


F1 = Fuse 1\015\012You should be able to locate a surface mount fuse at your local electronics store. ... NEC MultiSync LCD1830 18.1" LCD Monitor

MAG Innovision LT1919WDb flat screen goes black


When a monitor works for a few seconds or more and goes black it is a problem with the power inverter board over heating because of a bad capacitor or capacitors that are not the right size. There is no problem with the VGA controller since it shows ... Computer Monitors

"Palm Tungsten C quit. About 6 months age. Reset gave display for 1 or 2 seconds then white screen"


This doesn't sound like a software issue to me.. After the one or two seconds does the display continue to stay on with a blank screen or does it just turn off? Coz the white screen usually suggests that only the backlight is on and the LCD panel i ... PC Desktops

Monitor "sleeps" I have an HP Laptop w/Vista - I don't believe that my question is a problem - rather it's probably that I don't know how to adjust a setting or two. - My laptop monitor goes off after about 10 minutes or so - so I have to go over and hit a key or move my mouse so that it comes back up again - This is annoying when I am trying to look at a video on the screen - if I dont run over fast enough, I am recording a blank screen - Can I adjust the "sleep" time so that my monitor stays o


There are two places where the sleep time can be affected, both of which are accessed through the Control Panel that is normally an item on the Start menu.\015\012\015\012Check the Display folder first and look for Screen Saver. This can be tur ... Dell E173FP 17" LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor

I have a Princeton VL173 Monitor and when I switch it on the screen comes up for about 2 seconds then goes blank,and each time I switch it on and off by the monitor it only stays up for a second or two. I would appreciate any advice, thanking you in advance


Would think that this one could be a bad capacitor problem.\015\012The unit is pretty easy to dissasemble, and remove the screen itself from the housing, look at the power board, the main board in the middle of the unit, and see if you see any ... Princeton Digital VL173 Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5911 seconds