Having problems with your Packard Bell Easy One Silver 2120 Notebook ?

Ram change on Packard Bell easyone 2120

\015 Hi I have bought the right ram for the upgrade but have lost the instructions on where the ram goes (where to put it) From memory I think it s under the key board, can anyone tell me where to find the info.Many thanksPaul\015

Answers :


\015\012
\015\012Memory Upgrade Instructions
\015\012128 MB SDRAM on-board, max. 256 MB upgrade (384 MB total), PC-133
\015\012Remove the memory module according to these steps:
\015\0121. Turn off system power.
\015\0122. Remove the battery and disconnect the AC-adapter.
\015\0123. Open the top cover.
\015\0124. Press the locking latch downward to unlatch the Easy Start panel.
\015\0125. Then push it leftward and lift it up from the left side.

\015\0126. Slightly lift up the keyboard and disconnect the cable from the system board to free the keyboard.

\015\0127. Pull the retaining clips outwards (1) and remove the SO-DIMM module.
\015\012
\015\012Keith Stoffer
\015\012Comptia A+ Certified Technician (20+ years)
Repair Help & Product Troubleshooting for Packard Bell Easy One Silver 2120 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Ram change on Packard Bell easyone 2120


\015\012 \015\012Memory Upgrade Instructions\015\012128 MB SDRAM on-board, max. 256 MB upgrade (384 MB total), PC-133\015\012Remove the memory mod ... Packard Bell Easy One Silver 2120 Notebook

Packard bell imedia 1402 will not boot up power button is flashing amber twice every second also amber led right hand corner on motherboard


Sorry, I stepped out. Otherwise I would have answered right away.Your power supply changes your household, (Residential),or business electricity, into three main voltages. Also converts it from AC to DC electricity.1) 3.3 Volt ... PC Desktops

Trying to identify the memory module on an Packard Bell EasyNote


DDR SODIMM ... PC Laptops

I want to open up my pc to change the RAM memory


Hi\015\012There you go. link below\015\012http://support.packardbell.com/uk/item/index.php?i=6981840101&ppn=PB3 ... PC Desktops

No sond on my speakers


Make sure that the connection toward your speaker firmly check. If your are sure of the connection and no sounds at all. Maybe its time you to upgrade and reinstall all the drivers of your system. OIf you have CD/DVD Utilities enclosed into your sy ... Packard Bell iMedia 6826 (P481000502) PC Desktop

My Laptop Same Thing


The problem with upgrading or downgrading to MS Vista is the lack of driver support manufacturers provide as unlike other past Operating systems Vista did not sell very well retail...it was forced upon Manufacturers who "had" to include it at a certa ... Packard Bell Easy One Silver 2120 Notebook

Want to know where memory slots are and how to get


The memory slots are accessed ferom a cover underneath the laptop. This should be held in by 2 or 4 screws. Simply remove them to gain access to the RAM slotS. Remember to switch off rthe laptop while changing RAM as if not this could damage the RAM ... PC Laptops

Need to know the spec for mother board


The Packard Bell iMedia D3318UK desktop computer? If it is an iMedia D3318UK model it will have the Part Number - PV.U050Y.019 on the back of the computer tower. (P/N PV.U050Y.019)If this is the correct model; ... PC Desktops

Hi at post i get 1 3 1 error beeps. Is this memory


Open the cabinet and remove the ram and clean it and again keep it, or change other slote, and other slot also you are facing same problem means the fault in ram ... PC Desktops

System installed Windows 98 SE 1-Computer getting slow. 2-Too frequent stops called: "illegal operation perfomed" 3-Computer generating a lot of cookies.Much more than before. 4-Only thing updated was "flash player 9,0,159,0" which is the last aplicable to Windows 98"


I will have to break this up into 2 post or more...\015\012 \015\012 \015\012Manage Windows 98 Virtual Memory \015\012\015\012\015\012\015\012\015\012Virtual memory is an important contributor to Windows 98 ... PC Desktops

4gb ram in foxconn n15235


Hello Jobedy\015\012\015\012Everything I found pointed to this board being installed in a Packard Bell computer. One listing indicated the board supported up to 2GB of RAM. So, apparently, 4GB won't run on this system.\015\012 ... PC Desktops

New installation after replace new harddisk


Hello!!http://rapidshare.com/files/67642110/PackardBellBen.exeDown load (2MB)to desk top put a CD-R in cd rewriter drivethen ... PC Laptops

Easynote will not go past packard bell screen


You may need BIOS update. Check your CMOS time at bios page.\015\012If time is wrong, set it up and try again. If this is solved the problem, change the CMOS battery. \015\012JMC ... PC Laptops

Need to make laptop notebook packard bell dvd region free locked on o1


You can only change the region code up to 4 times then it locks on the last change.There are some firmware upgrades that can change the drive to region free, if you can screw it up or put in the wrong frmware upgrade then the DVD drive will be ... IBM ThinkPad R50e Notebook

Try to start, keep getting the message below.


What operating system are you using? and where do you get this message and is it given by a spesific program? possibly faulty ram, test your ram with memtest86 http://www.memtest86.co ... Dell Inspiron 1525 Notebook

New ram cards to upgrade, now won't run windows


Ok,I looked up the specs on this pc. It's kinda old & it says it comes with windows me installed,but apparently some come with or are upgraded to xp. Go into bios setup,usually f1 or delete,should say during post. On the first page in bios see if ... PC Desktops

DVD drive can't be opened before windows is loaded


Michael, put the disk in your optical drive tray. Now press the CTRL key, ALT key, and DElete key AT THE SAME TIME. (Not shouting)Pressing these three keys at the same time, will make your computer restart. Now it will boot fr ... PC Desktops

I have an old packard bell D1000 multimedia intelpentium, 133mh prcessor,1.2gb hard disk,32mb ram.33600bps modem 8x cd rom, what can be upgraded if any. I only use it for grandchildren but would like to fix problems with it. The cd rom slows down when playing game. I have tried to restore with cds that came with it. I think there may be files missing. i am not avid computer user so i am just messing with it. I have another computer that i use. but it would be good to have it running better.


Rm,\015\012\015\012Most likely, more RAM (memory) will help. That computer can hold a maximum of 128MB or RAM.\015\012\015\012The EDO memory for that computer is no longer manufactured.\015\012[72-pin EDO SIMM]\015 ... PC Desktops

Upgrading Memory on Packard Bell MIT GHA20


If you look along the top edge of the escape/function/del keys, there are several small plastic tabs that hold the keypad in place.\015\012\015\012Use a very small flat head screwdriver to push these back from one corner across to the other, gently l ... PC Desktops

How do I add more ram to Packard Bell Notebook


All you need to do is to remove the keyboard and the slots should be under it.. ... Packard Bell PC Laptops

Packard-Bell EasyNote M5262 RAM upgrade


Yes under the keyboard which you acces by taking off the bezel that should cover the hinges. ... PC Laptops

Packard bell easynote m5262


I have purchased some more RAM from Crucial for my friend's Easynote M5262 but cannot find where to install it!  Can you help, please? ... PC Laptops

Packard Bell IGo 4000 series Versa E400


If you cannot see the speaker icon in the taskbar, click on Start > Control Panel > Sounds and Audio Devices and tick place icon in the taskbar. That's if a driver has been installed for your sound device which is a creative sounblaster ... NEC Versa SX Notebook

Hi Guys I have a packard bell istart 1359, memory max is 2048mb and I currently have 512mb installed. I purchased 2 x 1gb ddr2 pc2-5300 -cl=5 -unbuffered -non ecc ddr2 - 667-1.8v -128 meg from crutial. I have tried to install these in various combinations : one by one in one slot, also together with the original ram but I cannot get the pc to start up I get a beep but no windows and won't startup. I have tried to go on packard bell website to get bios upgrade, but no support from them. don't kno


I went to crucial for my memory upgrade the same thing happened you get a beeping noise when uve inserted them the reason for this is because they arent the right mem cards and crucial dont supply the memory cards for the packard bell istart 1359 in ... Packard Bell iMedia 6826 (P481000502) PC Desktop

My packard bell pc just stopped working


I think This is BIOS problem so\015\012open CPU box and clear bios settings...\015\012oterwise change tha mother board\015\012\015\012TENNISON J ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3889 seconds