Having problems with your Norcent Technologies LM-762 17" Monitor ?

Monitor issue the monitor image is shaking up and down in direction, however when computer is starting up, the windows logo is fine until it finishes loading and goes to the desktop.that is when the shaking starts


Answers :

Look to Caps on the inverter if its an LCD or flat pan. monitor.. Weve seen this be4..
Repair Help & Product Troubleshooting for Norcent Technologies LM-762 17" Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor issue the monitor image is shaking up and down in direction, however when computer is starting up, the windows logo is fine until it finishes loading and goes to the desktop.that is when the shaking starts


Look to Caps on the inverter if its an LCD or flat pan. monitor.. Weve seen this be4.. ... Norcent Technologies LM-762 17" Monitor

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

VAIO PCG-K33 display goes blank during windows boot Options Ther


... Sony VAIO PCG-K33 Notebook

No Signal when desktop wants to load


This is exactly what is happening to my monitor but happens a bit faster. Once the drive starts then the monitor turns on and turns straight back off again. The monitor works on other people's computers (including the tech guy at the shop I bought i ... ViewSonic VA1916w LCD Monitor

Blank monitor I accidently deleted computers monitor driver. computer starts up ok and shows "windows xp loading" then goes blank!


Hi,\015\012 To resolve the problem,do the following step,\015\0121. Power on the system\015\0122. At dell logo screen before windows xp starts to load tap on the F8 key slowly 5 to 8 times\015\0123. Select safe mode\0 ... Dell Dimension 2400 PC Desktop

Dell E228WFP Monitor failure


To me, that's an XP driver issue. If the screen turns on at all, then goes dark during XP boot, that's nearly a ringer for drivers. Out of range on the Hz? Tried booting in safe mode to see if it loads with standard win drivers? That migh ... Dell E228WFP LCD Monitor

Wireless connection slow


Same problem. RESOLVED it by going to device manager (hold the Windows Logo key near the space bar and hit PAUSE) Click hardware tab, and then device manager. click the plus next to network adapters to expand it, then right click the atheros wirele ... Acer Aspire One PC Notebook

Hello I wonder if you can help. When we switch


Had a similar problem like this several times. Try choosing safe mode. Safe mode will load the required drivers. After safe mode finishes the loading process, restart your computer and choose to start windows normally. The problem you mention usu ... Computer Monitors

HP L1906 flat monitor


... HP vs19 (Silver) 19" LCD Monitor

When I power up both my Desktop and the Monitor the O/S starts to load fine, but there is no signal on the monitor. Strangely when I switch OFF the power to the monitor ans wait until the front light goes out then switch the power back on again the monitor immediately shows at what stage the O/S is at, or if finished loading will show the desktop. Any body out there who can assist me please? Graham.


Try to reconnect the power cord and the vga cord of your monitor. Please be sure that it is properly connected. ... Acer AL1715 17" LCD Monitor

Acer AL1914 black screen, green light


It sounds like a deleted driver? try getting the driver for the monitor, did you loose the Operating system at some point, if so try a system restore to a date when the computer was working properlly prior to the malfunction. It sounds like it restor ... Acer AL1914B Black 19 in LCD Monitor

Monitor keeps blank even the power lLED is on green


If it's working fine in DOS, it can only be your display drivers for your operating system. What happes when you start in SAFE MODE? When you PC starts, keep pressing the F8 key, go to Safe Mode. If it works, bring the Resolution down to 800 X 600 an ... Philips Standard 104S 14" cRT Monitor

Have a problem with my machine T3092. The monitor


Stop using the restore disc, try installing the OS instead and make sure you have your driver software ... E-Machines eMachines Desktop PC

Dimension 4500S I have Dell Dimension 4500S it was working very good but sudden starts booting-up but after the windows XP logo finish loading up, the display goes blank, it has power all the lights in back of the computer are ok but nothing come to the display. I disconnect everything like modems, cd drivers and so on I also change the power supply but nothing happens. Can somebody help????


Hi lidio7, I would like you to click the link below & scroll down till you see Diagnostic Codes. Please follow the instructions listed.\015\012\015\012 ... PC Desktops

Monitor displays slowly after the computer starts.


Try to turn off you screen saver just turn off power monitor to see monitor easy wake up after long time.if ok means windows screen saver have problem if still same look like is you monitor something wrong need to check ... Dell Dimension 2400 PC Desktop

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Monitor goes blank after seeing XP during boot up.


Did u replace the video card with the same kind of model ? i guess yes ... when system starts hit the f8 key and than go in to safe mode ... mouse wont work so use arrow on the keyboard .. and in the safe mode just log in to admin account if availabl ... HP Pavilion a305w (DM181AR) PC Desktop

Blank Laptop Screen


Unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery\015\012turn on you can plug the power co ... Gateway MX6956 Notebook

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Hi, I have a compaq deskpro that is working fine however, the monitor is having trouble. I took the monitor to the shop and it is fine also. Likewise, I placed a monitor from another computer onto the compaq it it worked fine as well. Why will the monitor for mycompaq computer work. When I turn on the computer, the monitor works well until it passes the COMPAC Logo with press f10 for set up at the bottom. Then all is well as it displays the Windows XP Logo. After that the screen goes black and l


The monitor setting in windows maybe incorrect. When booting up before you get the windows logo start hitting F8 and then choose safe mode. If your monitor works in windows there then check the monitors settings. You may have a driver issue or a ... Compaq PC Desktops

Monitor comes on, then goes back off, rinse, repeat.


Well here is a test you can do. When the monitor goes black, take a flash light and hold at it a angle towards the monitor, if you can still faintly see the image then you have a blacklight/inverter issue. Another common issue with this is the capaci ... Princeton Digital VL1918 Monitor

7720 will not boot


Off course it is repairable dont worry look try to install OS thru the following procedure to factory default stateAcer: When you first turn on the laptop and see the Acer logo screen, hold the ALT key and press the F10 key (you need to d ... Acer Aspire 7720 Notebook PC

Screen is Black/Not on from start.


Try going into your BIOS by starting the notebook and tapping F10, when the screen comes up then tap once on F9, and choose to save default settings, and tap F10 again and exit. One other thing you can try is to connect your notebook to another scree ... HP Pavilion dv1000 Notebook

On Pwr up logo appears then LCD returns to stanby Black screen


I will assume the monitor is staying on during the boot process all the way until Windows loads.\015\012If that is the case, then...\015\012\015\012Start the computer\015\012wait unt ... BenQ FP71E 17" LCD Monitor

Technically Black Screen


Same problem here, is there a solution?My T20 ran fine until today when after the XP load screen the screen goes black but the system loads well. With F8 and vga mode or safe mode the system loads with 640x480x8bit. In display properties/settings the ... IBM ThinkPad T20 2647 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8495 seconds