Having problems with your NEC MultiSync FE2111SB 22" CRT Monitor ?

NEC MultiSync FE2111SB 22in monitor problem

\015 I have had thid monitor for a few years has always worked great now when it should be on it blinks with a green light at all times unless I kill the power. I checked all the connections and it still does the same thing. If anyboday can help or tell me what the green blinking light code is it would be helpful thanks.\015

Answers :

A blinking green light usually indicates no video signal. check your cables, and if you have another computer, try it on that. otherwise, carefully check your vga signal cable, and the connections on the neck board [where the crt plugs into]
Repair Help & Product Troubleshooting for NEC MultiSync FE2111SB 22" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NEC FE2111sb multisync 21 inch monitor troubleshooting

The symptoms you describe sound like the monitor is going into 'greeen mode' - that is to say, it sees no video signal present. first, try another monitor ti isolate and make sure the problem is the monitor. check the vga plug pins [especially if you ... NEC MultiSync FE2111SB 22" CRT Monitor

NEC MultiSync FE2111SB 22in monitor problem

A blinking green light usually indicates no video signal. check your cables, and if you have another computer, try it on that. otherwise, carefully check your vga signal cable, and the connections on the neck board [where the crt plugs into] ... NEC MultiSync FE2111SB 22" CRT Monitor

Purple Screen on NEC MultiSync FE771SB

It is the problem with Monitor. Check the soldering on the crt bord, if there is any dry soldering re solder the same. ... Computer Monitors

NEC Multisync 1770gx lcd monitor goes blank when I move the unit

HI\015\012\015\012you must to check the volt at pin 1 of the lcd slot screen you'll get about 3.3 volts if not it can be the problem.\015\012\015\012Gilson\015\012\015\012 ... Computer Monitors

Horizontal Bright White Line in Middle of Screen.... and thats it.

I am having a similar issue with my NEC multisync FP912SB monitor. In my case the problem is intermittent, the line remains at the same level of brightness, and the osd, when activated, is compressed in that horizontal line as well. The problem is ... Compaq FS 7550 17" CRT Monitor

NEC P1250+ hisses and scrren blips intermittently

I had the same problem. Your monitor is warning you of failure. The hissing sound is the picture tube powering up. The momentary blank screen is when the power supply for the monitor has become hot. Your monitor is getting ready to quit. My suggestio ... NEC MultiSync P1250 Plus (White) 21" CRT Monitor

Problems with colors in CRT monitor (Nec MultiSync E700)

... NEC MultiSync FE700 17" CRT Monitor

Specks of dirt inside monitor

From the sounds of your problem, you have a few dead pixels. This is a problem that can exist in LCD displays that have not been quality tested or have been damaged in some other way. If the unit is still under warranty, I would see if it could be ex ... NEC 1560M-BK 15" Flat Panel LCD Monitor

Monitor problems my NEC Multisync LCD 1830 monitor keeps cutting in and out or will not start at all on boot. Is it the montior or the video card?

If u get normal beep of ram then check your disply resolution .\015\012\015\012when u start your pc press F8 key continus then if u get menu choos best configuration loading in menu.then change your resolution to 800x600 or 1024x768 . ... PC Desktops

NEC MultiSync lcd 2010 monitor blank screen

This is the common bad capacitor problem. The caps have died inside, and they can be replaced. If you have basic electronics skills, you can go in, order replacement caps, and unsolder and resolder. If you can't do it yourself, you can take it into a ... NEC MultiSync LCD2010 20.1" LCD Monitor

I CAN'T READ THE BLUE TEXT IN MY E MAILS - NEC MultiSync LCD1720M (Black) 17 in. Flat Panel LCD Monitor

If Blue colors display properly in pictures or graphics check the display and size settings of your computer in relation to the size monitor.If there is a problem with the blue color because of a problem with the monitor you might be able ... NEC MultiSync LCD1720M (Black) 17 in. Flat Panel LCD Monitor

Cmv monitor bad color

The problem is your monitor, not driver or settings or video adapter cards. You have basically two options get another CRT or LCD display, or if it is still under warranty call the company get a "Return Authorization Number" and ship it back to the m ... Computer Monitors

Power supply My name Deni, I'm a computer laboran. I have some problems on power supply it's monitor nec multiSync PC-173, my problem on the power supply that japan standard (100 volt AC) i want to convert it to standard 115-240 volt, but i don't know which components sholud be changed, i surely you can give me solution about on, and better if include the schemes that what spares would be changed, and if needed, general schemes about nec power supply converts. on your repply, i would say thank f

... NEC MultiSync FE700 17" CRT Monitor

Monitor coating A friend gave me a very nice CRT glass flatscreen monitor the other day, works fine but screen was a little dirty so, I cleaned it same way I clean my glass/mirrors etc (if you don't know you don't know) I cleaned it with Mr Muscle spray. There is not huge damage but of course it has removed some of the coating, looks like scratches but it's not. It's an NEC MultiSync FE950 but this model not shown in your list of products so I have chosen 'nearest' just to get in. Any chance of

U should not have cleaned it with mr muscle these all sprays are a slight acidic and strong for monitors u should have cleaned it with a slight wet cloth u have to replace the glass of your monitor visit a computer store and tell them your problem ... NEC MultiSync FE991SB 19" CRT Monitor

My monitor just went completely blank. There is a

Hello,The ticking sound you hear is from the power supply trying to power up. If you can solder you should be able to repair the monitor yourself. The problem is caused by blown capacitors on the power board. Go to our web site at : ... Computer Monitors

Hi I just bought 7 NEC Multisync LCD1550v monitors and they all have the same problem. when plugged in all i get is a blinking power light. 1 of them showed signs of life for just a second but that was it. Can anyone tell me what this may be and how I might fix it? I know its not a computer issue. Thanks

You buy a new LCD Monitors, now still not working., if that new LCD Monitor is OK, then check your VGA Card, its inside the CPU maybe its broke or not connect properly inside. This are the cause of not displaying in your LCD Monitors.If you her ... NEC-Mitsubishi MultiSync LCD2170NX (Black) (Black, Light Grey, Silver) 21.3" LCD Monitor

The monitor is a NEC MultiSync 700+. Recently the top half of the screen becomes black and I can see a coase light line in the middle. a few minutes later, it becomes normal and it black the top half screen again. Sometimes hit the monitor will help. It is an old monitor (I bought it on 2003), but the other part of it is perfect. Just wondering if it is small problem I should fix or I just need to dump it.

... NEC MultiSync FE700 17" CRT Monitor

No picture on monitor - green power light blinking

There's an internal electronic part/s of your monitor that is cold soldered / defective. I suggest to bring the unit to an authorized service center to properly diagnose & fix the problem. regards ... NEC MultiSync 75 17 in.CRT Conventional Monitor

Screen off center

Try updating the latest driver for your video and bios. try connecting your laptop to external monitorif both of this didnt solve your problem, i suspected you lcd screen is faulty and need to replace. ... NEC MultiSync XE21 (White) 21 in.CRT Conventional Monitor

Problem with an NEC MultiSync 1550V 15" LCD

The power supply section may be failed, or there may be a short on one of the boards causing the monitor to cycle through the protect mode. \015\012\015\012Jerry G. ... NEC MultiSync 1550V 15" LCD Monitor

NEC MultiSync 1530 streaking /bleeding to the right of text and images

... NEC 1560M-BK 15" Flat Panel LCD Monitor

My NEC MultiSync FE991SB just recently started loosing the blue color when ever I turn the monitor on. Sometimes the blue will stay on for about 2 to 3 minutes. I checkec the cable, graphics card, pins, etc. and I think the problem is inside the monitor

... NEC MultiSync FE991SB 19" CRT Monitor

Operating at a slower than recommended refresh rate

The refresh rate can be configured in Windows in the display properties. It does require that your monitor has been identified or configured, otherwise it can limit the refresh rate.You can overrule the setting to not limit the refresh rate to ... NEC MultiSync FE700 17" CRT Monitor

Specks of dirt inside monitor

... Philips 150B3T 15" Flat Panel LCD Monitor

Nec multisync 2080 monitor

I got a similar problem with my NEC 2080UXi. The power led indicator is lit as soon as I plug in power. No back light ever comes on. Capacitors appear to be fine. I did notice that a resistor did burn up and appears to be a small wattage from siz ... NEC MultiSync LCD2000 Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6518 seconds