Having problems with your Mag Innovision lt456s 14" Flat Panel LCD Monitor ?

Monitor Message = "No Signal"

\015 I was given a Mag Innovision LT456 flat screen. (a) I connected it to a Compaq computer. The message "no signal" flashes five times and goes away. The screen is black. (b) I connected it to a Dell Demension computer and get the message "Mode Not Supported." The message stays on the screen.\015\012\015\012By the way, I have two regular monitors that work fine with these computers.\015\012\015\012Any help\015\012Albert in Chicago\015

Answers :

See i use Compaq too
they don't generally except other modes

did u try that monitor with other pc where it worked

u should install proper monitor software ... u will found it from the cd given wit Ur monitor


Repair Help & Product Troubleshooting for Mag Innovision lt456s 14" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

I live in Seattle and have an Acer V193B that 'went dark' when I hot-pluggged the VGA connector into my laptop. I *assume* the problem is the chip that buffers the VGA lines is blown. (I know the cable and laptop VGA are not the problem.) The monitor has power (power button glows orange), there is just no video display. Is there any chance that I can get this repaired w/o spending more than the monitor is worth in shipping and repair costs?


First, to check the monitor.\015\012Disconnect the input signal from the computer.\015\012Turn off the monitor and unplug from the A/C source.\015\012Allow the monitor to set for a few mi ... Acer V193 B LCD Monitor

Princeton Digital VL1716 Monitor "No Signal Message"


Roxio Changed Your display settings on the dual display.\015\012\015\012Right Click on desktop>goto Prefences> \015\012\015\012You should see both monitors indentfy the one and change it to a lower resolution. ... Princeton Digital VL1716 17" LCD Monitor

An Out of range box


Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors

Monitor has no picture


Yes! :)Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer."No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer. ... ViewSonic VX922 19" Monitor Flat Panel

Monitor shows no signal


Ur monitor is "not" the problem... you have problem in ur PC..\015\012\015\012solutions:\015\012check loose graphic card\015\012remove ram. put them back again/... ... Intel (RK80532PG0881M) Pentium 4, 3 GHz Processor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

Monitor Message = "No Signal"


See i use Compaq toothey don't generally except other modes did u try that monitor with other pc where it workedu should install proper monitor software ... u will found it from the cd given wit Ur monitor ... Mag Innovision lt456s 14" Flat Panel LCD Monitor

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

DELL E153FPf doesn't show the image


OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

The monitor leaves a message no input signal, then " going to sle


That signal means the monitor is not getting any signal from the computer. It probably means your video card or connection is bad. You can buy a pretty cheap ($35-$100) video card from a local store (Best Buy, Circuit City, Radio Shack) or online. ... Compaq fs740 17" CRT Monitor

New video card - now an error message


Check the bios of the machine for\015\012\015\0121. disable onboard vga when pci is installed\015\012\015\0122. look for a setting like\015\012set acpi/usb buffers at top of memory\015\012\015\012this setting ... HP Compaq d530 PC Desktop

Wacom Cintiq 12WX


I had the same problem with the "signal out of range" box in the middle of the screen. I went to Display on Control Panel and clicked the Settings tab. Click the monitor icon for the Wacom tablet in the window (if you are using more than one monito ... Wacom Cintiq 12WX Interactive Pen Display Monitor

No signal on first boot


I think is a power supply problem,, ... Nokia 445 Pro 21" CRT Monitor

19" starlogic monitor


If you are getting a "No Signal" message, someone may have inadvertantly pressed the wrong button on the monitor. Use up arrow of button #5 below to cycle through RGB (normal VGA connection) and DVI sources. Down arrow will result in "No Signal" mess ... Star Logic 17" LCD Monitor

My samsung 940N acts like a florescent tube, tries to start and doesn't


Use the self test feature.. follow the steps..\015\012\015\0121. Turn off both your computer and the monitor.\015\0122. Unplug the video cable from the back of the computer.\015\0123. Turn on the monitor.\015\012If the m ... Samsung SyncMaster 940N 19 inch LCD Monitor

Monitor screen begins as computer is booting up and then screen goes black. Message says there is no signal.


If the power light dims or changes color after the no signal message comes up, that means the monitor went to sleep.While the monitor is plugged in and on and the computer is also on, Try unplugging the VGA cable from the monitor. wait 30 secon ... ViewSonic VG2230WM LCD Monitor

"No signal" error message, then monitor turns off, then on again


Replace your graphics card (VGA CARD).. ... Acer AL1917W LCD Monitor

HP vs17e Monitor "No Input Signal"


... HP Computer Monitors

Monitor and keyboard won't turn on


A couple of things here:\015\012\015\0121) The flashing light and signal message indicate that the monitor is functioning but is not receiving a signal from the computer.\015\012\015\0122) The memory that you added is liklely ... PC Desktops

When using computer for about 10 min, monitor goes blank with an error message of"No Input Signal" then computer rebuts several times. Any idea's?


Its possible that your computer maybe having a driver conflicting with your monitor. My suggestion would be reinstall the software that came with your monitor. If you don't have that go to the companies website that produced the monitor and download ... PC Desktops

The lcd monitor does not have a picture and will not shut off when it has power.


\015\012§ Turn Off the Monitor.\015\012§ Unplug all the Cables from the back of the Monitor. \015\012 ... PC Desktops

Screen shows message "no input signal" and monitor goes to sleep.


Monitor show "no input singnal" error masage when not gating any type of video singnal ,\015\012so if u realy check your monitor wires for correctty plugged in . \015\012then:- Two possibilities:\015\012either the ... HP vp17 Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4439 seconds