Having problems with your Logitech (9633260403) Game Pad ?

Logitech Cordless Rumblepad 2 red light off next to mode button

\015 So I've had logitech cordless rumblepad 2 for about 1 year but I have never really used. Only one time when I bought it. Today I wanted to use it for first (well, second) time. I connected the reciver and its light started blinking as usuall, but the rumblepad light did not blink, in fact is was completly off.My first thought, change the battery, and so I did. When I inserted the battery, the red light turned on for two seconds and then off again.I've found out in the logitech website that the pad has two modes: flight and sports, in which the red light was supposted to be off.If the solution is to switch between the different modes, then how do I do it? And if its not, Is there anything I can do?\015

Answers :

Hi !\012I suggest you to install the software including drivers + profiler here:\012http://www.logitech.com/en-us/486/2965?WT.z_sp=Image\012
\012Then you can download pre-defined profile for your game here:\012http://www.wingmanteam.com/profiles/profiles_users.htm\012
\012Thanks and have a nice day !\012J -
Repair Help & Product Troubleshooting for Logitech (9633260403) Game Pad

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Logitech Cordless Rumblepad 2 red light off next to mode button


Hi !\012I suggest you to install the software including drivers + profiler here:\012http://www.logitech.com/en-us/486/2965?WT.z_sp=Image\012\012Then you can download pre-defined profile for your game here:\012http://www.wingmanteam.com/profiles ... Logitech (9633260403) Game Pad

Logitech Cordless Rumblepad 2 connection problems


 The 5 + 7 buttons work for teh OLD versions that take FOUR batteries and have the RED Logitech logo.The New versions, which use TWO battreies has an ORANGE logo use buttons 6 + 8 to reset sticks.Whatever postition the sticks are in ... Logitech Cordless Rumblepad 2 Vibration Feedback Gamepad (GAMELOCRMBPD2)

Gears of War for Vista and Logitech Rumblepad 2 directional issues (fwd/rev)....


There is a way to fix it: go into your control panel under Game controllers, select your logitech cordless rumblepad 2 and hit properties -> settings -> Enable Swap Mode -> close -> okNow start Gears of War and go ... Logitech Rumblepad 2 Vibration Feedback Gamepad [ 963325-0403 ] (126758)

HP Pavilion dv 2000 Won't start up at all!


HOW TO FIX YOUR DV6000/DV9000/DV2000All the Problems described in the previous posts are Graphics Related..Faulty Nvidia Chip..Both Intel And AMD Based Motherboards..Though More Common on the AMD..The symptoms of the Lap ... HP Pavilion dv2000t Notebook

Cannot broadcast on Skype


See section A. Skype in the info below to setup the Audio & Video.Also send this to your family and friends so they have their computer setup properly.Web Camera's have to be setup on the program they are to be used with. Just insta ... Logitech Z-5500 Computer Speakers

HP DV6000 Laptop won't power on


HOW TO FIX YOUR DV6000/DV9000/DV2000All the Problems described in the previous posts are Graphics Related..Faulty Nvidia Chip..Both Intel And AMD Based Motherboards..Though More Common on the AMD..The symptoms of the Lap ... HP Pavilion dv6000z Notebook

Unable to boot at all


Overheating problem. Pls get a technician to clean the processor and apply a fresh layer of processor sealant and also clean all the fans. ... Evesham Voyager 6400 PC Notebook

I recently purchased the cordless mx 3200 laser desktop (ie keyboard and mouse). I have been able to get the mouse working, but not the keyboard. I keep trying the connect buttons but there seems to be no on/off button on the keyboard to tell me whether the keyboard has connected. there is only the red little connect button am i supposed to push both buttons at the same time? i keep thinking i am connecting the keyboard but then i end up with no keyboard and no mouse


Push the connect button on the base - the light on the base should flash. Push the connect button on the keyboard. The light should stop flashing. (This is the generic Logitech way - individual models may vary slightly.) ... PC Desktops

Won't shut off, buttons won't work, blue square in top left corner


Unplug the power cord for the monitor for a few minutes ... Microsoft HannsG HU171D 17" LCD Monitor

Logitech Z-5500 DON'T POWER ON. HELP!!!


Check its power supply if its working, first.check the outlets(electrical sockets)just to be sure of proper fit. ... Logitech Z-5500 Computer Speakers

Logitech Cordles Rumblepad 2 - Connection issues


... Logitech (9633260403) Game Pad

I have a logitech cordless mouse that does not charge when placed


Either ur cradle or ur battery hav been damaged...\012\012try changin it... ... Computer Utilities & Maintenance

My GE instajack is not working. It had a greeen signal, now it has a red signal.


Most likely, the extension unit cannot communicate with the\015\012indicator light is solid base unit for one of the following reasons:\015\012red • Base unit has yet to be installed. Install base unit. (Refer to\015\012the Set ... PC Desktops

I got 2 logitech wireless mice in same desk, because I dont have anywhere else to place them, and they interference with each other...How can I change frequencies? Please help Thanks


This is in the logitech knowledge base.Question: ''When I move my cordless mouse, it moves the cursor on the system next to me. What should I do?''Answer:\015\012''This is called ''Cross talk'' and is characterized by one cor ... PC Desktops

I have 2 comtrend dh-10pf powerline adapters. one of the adapters status is a red flashing light and the AP light and the Ethernet light are blank. the second powerline adapter has a solid red status lighte whilst the AP light is orange. when i connect my second adapter to my pc via an ethernet cable, the adapter does not work and i need help trying to re-configure the two adapters so i can get the internet working again.


Hi,\015\012To start you need to factory reset both adapters,\015\012plug them both into a wall socket next to each other, press the config/f reset button, hold in until ap light goes off, repeat on the other one.\015\012Now you shou ... PC Desktops

Red light on power up. No image on monitor. Pc fans working.


On a computer mainboard there are usually a number of connecting pins right next to one another called RESET, POWER LED, HD LED etc.The power led often leads to the green LED next your power button to show that the juice is available and on. Th ... Aspire Red X-Cruiser Mid Tower ATX Case without Power Supply (CSASXCRUSRD)

Pc wont boot up, instead a red light flickers.


Flickering LED means power supply is overloaded with something. It might be inside of the supply, but sometimes it is something else. Try that:1. Disconnect everything from the motherboard except power supply and power button;2. Disconnec ... Compaq Evo D500 PC Desktop

Front panel Ac Switch failing to start computer.


Try these steps.\015\012If Power supply light does not turn on (or no power supply LED)\015\012Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure:\015\012NOT ... Compaq Presario SR1000T (568657) PC Desktop

Pinout on t6410 gATEWAY CONNECTING POWER BUTTON


I don't see that this problem was solved. Adding additional information.The eMachines T6410 Desktop PC uses an MSI MS-7145 motherboard.(MicroStar International ), ... E-Machines eMachines Desktop PC

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Power light on monitor blinks green, monitor is dark


Perform a Monitor self-test to determine whether the issue is with the Monitor or with the Video card of the Computer/with the Computer.1. Turn OFF the Monitor.2. Disconnect the video cables that connect the Monitor to the Com ... Dell Computer Monitors

Universal remote I have a remote that says philips unversal. the only number i can find on it is CL032. I lost my code book and need to know how to set up my tv for this remote, the tv is a JVC. thank you Betty Houston


Sounds like you have a PM725S.(no, that's not a PMS joke :-) If you are comfortable downloading and unzipping files and reading .PDF (Portable Document Format) files, put this link into the address bar of your brow ... Computer Monitors

Freedom 2.4 problem


What you can try is to press the surface on the receiver where the light blinks. This is actually a button you can click. The blinking pattern should then change. Now press any button on your joystick. The receiver is now scanning all channels for in ... Sony Logitech Freedom (vs9632830403) Joystick

3yr old got ahold of monitor


Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors

Troubleshoot Computer Clock


To me that still seems that you may have a virus. A lot of times when you run Norton, Macafee, Spybot the virus knows what you are trying to do and hides it self. Sometimes you have to use a kinda unknown Anti-Virus program (unknown as in, a l ... HP Pavilion dv6000z Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6229 seconds