Having problems with your Labtec LCS 1024 Computer Speakers ?
Labtec LCS 1024
\015 Im looking for a internal wiring diagram for Labtec LCS-1024 I have four disconnected wiring color is 2 red and 2 black i only want to know where do i connect them.\015
Answers :
Do you have any schematic of Labtec 1025 with wiring conection? Thank you for your response it does help me alot
I don't have a wiring diagram for you but can tell you this as standards apply.
Red is always the positive (+) terminal and black the negative, ground, (-) terminal. FYI-though people use the term ground it is not correct.
Another thing you should know is red and black are relative. Inother words, when red to red and black to black it will cause an outward motion of the speaker. If you happen to reverse them, red to black, it just causes an inward motion of the speaker. Sometimes this is refered to as the "phasing" of the speaker.
Speakers are usually marked at their connection points with a red dot or a (+) for the positve and a black dot or (-) for the "negative" side.
So there's nothing to worry about if this happens anyway except:
if you were to go red-black on one speaker, and red-red on the other. This will cause the speakers to be in series which normally wouldn't hurt things, but make sure it's not done just in case you amp section cannot tolerate this condition.
Hope this helps.
Jeff
Red is always the positive (+) terminal and black the negative, ground, (-) terminal. FYI-though people use the term ground it is not correct.
Another thing you should know is red and black are relative. Inother words, when red to red and black to black it will cause an outward motion of the speaker. If you happen to reverse them, red to black, it just causes an inward motion of the speaker. Sometimes this is refered to as the "phasing" of the speaker.
Speakers are usually marked at their connection points with a red dot or a (+) for the positve and a black dot or (-) for the "negative" side.
So there's nothing to worry about if this happens anyway except:
if you were to go red-black on one speaker, and red-red on the other. This will cause the speakers to be in series which normally wouldn't hurt things, but make sure it's not done just in case you amp section cannot tolerate this condition.
Hope this helps.
Jeff
Repair Help & Product Troubleshooting for Labtec LCS 1024 Computer Speakers
Tips for a great answer:
- Provide details, support with references or personal experience .- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Labtec LCS 1024
Do you have any schematic of Labtec 1025 with wiring conection? Thank you for your response it does help me alot ... Labtec LCS 1024 Computer Speakers
My labtec lcs 2414 speakers stopped working - Labtec LCS 2414 Computer Speakers
... Labtec LCS 2414 Computer Speakers
Labtec LCS-2424 speakers: left speaker stopped working
I have the same problem sir, only the speaker with volume control works. Earlier I used to twist the volume control thisway and that way to get the sound from the other speaker also.Now the same technique doesn't work anymore. ... Labtec LCS 2424 Computer Speakers
No wires for labtec lcs-3210
1500mA @ 15VDC. I've got a set of these speakers and I just looked at the adapter. ... Labtec LCS 3210 Computer Speakers
Wiring internal board of labtec computer speakers
The shielded wires are for ground, so they get connected together. Plug the wire into the PC and run some music. Then touch each wire to the others. You only have a couple of combinations to try...red-to-green and white-to-yellow, or red-to-yellow an ... Labtec LCS 1040 Computer Speakers
I just hooked up my Labtec LCS-2420 speakers to my new computer and can't get any sound out of them. I can get the cheap ones that came with the computer to work, but not the Labtec. I hooked them up to the old computer and they still work on it. Any ideas? I know that I've hooked them up correctly.
\015\012Click on Start, Control Panel.\015\012Double click "Sounds and Audio Devices" or "Multimedia"\015\012Click on "Audio" at the top\015\012Make su ... Labtec LCS 2420 Computer Speakers
Labtec speakers want play
Check whether the output plug is connected properly or not.... if it is then check out whether the adapter is giving the power output.... if it is then the speakers are spoilt otherwise u can just replace the adapter... ... Labtec Spin 70 Computer Speakers
I have a broken pin in the connector so my speakers won't work without it. Can a pin be put back in? It's a Labtec LCS2424
Please 4 help. I need pins for wofer LABTEC LCS-2424 . ... Labtec LCS 2424 Computer Speakers
I need a power cord for the labtec 45 speakers
I need a power cord for LabTec LCS 1016 ... Labtec Spin 45 Computer Speakers
Schematics Is it possible to get schematics for a Labtec LCS-1024 speakers?
Dclf1\015\012Good day!\015\012First things first:\015\0121) you only can find those schematics on \015\012http://www.labtec ... Labtec LCS 1024 Computer Speakers
I need to open the Labtec subwoofer LCS-2414. Is there any way w/o of damaging the housing?
... Labtec LCS 2414 Computer Speakers
I need hook up instructions for Labtec LCS 1012 Computer Speakers
... Labtec LCS 1012 Computer Speakers
Installing Labtec LCS 800 speakers
1 wire goes between the 2 speakers1 wire goes from the speaker with 2 jacks in it to the computer, the back of the computer should have a green port to plug in the cable to1 wire is the powerthis is a guess without seeing your ... Labtec Computer Speakers
I need a new power supply for Labtec LCS 1030 speakers and trying to obtain specs and power plug information. Anybody have the information available?
I know this is a little late, but the power supply that these speakers use appears to be 5mm across. The output specifications are 15V DC, 1000mAh (1A), with the center pin being negative. ... Labtec LCS 1030 Computer Speakers
MadDog MD-16XDVD9 could not perform end of disc-at-once
Have you tried checking your basics ? \015\012Firmware ?\015\012ASPI ?\015\012Disk Defrag ?\015\012IDE location ?\015\012Jumper settings ?\015\012What type of media are you using ?\015\012What programs ... PC Desktops
Acer recovery disk download
I keep getting this on my lap top and cant get ride of it can you help me?? Multi (0)disk(0) rdisk (0) partition (2)\\Windows\\AppPatch\\drvmain.sdbTRAP 00000006================EXCETION================multi(0)disk(0)rdisk (0) ... Acer Aspire 5315 Notebook
Wireless card not functioning/disabled after loading XP in a Compaq Presario C700T CTO Notebook PC
The wireless is not going to turn on and off via the switch properly until we get the drivers loaded to make it work. There are 3 possible types of wireless card it could be, so we have to find out the exact model number of your system. On the bott ... Compaq Presario 700 470024-192 Notebook
Burn fail or cd skip
Kind of sounds that way. They are pretty inexpensive now days, and simple to install.\015\012\015\012Good luck ... Gateway M680X PC Notebook
Same Problem Again - Mega Raid.... Unknown Error
Hi\015\012\015\012The title of your post suggests that you have "Maga RAID" errors. Maga RAID messages would be in line with issues on the LSI PERC sub-system.\015\012 ... Dell PowerEdge 1800 Server
My dvdburner of laptop hp pavilion DV2726CA reads any cd dvd but
Can use usethe drive to load data or write data and how about listening to music?? ... Acer Aspire 5100 Notebook
Maths & statistic
Standard deviation is the average root mean squared deviation from the average of the numbers.\015\012\015\012Familiarize yourself with the wikipedia page on standard deviation: ... Computer Speakers
I hit F8, here is the new error message
If this is all you are seeing, then this is not an error. What is happening here is that your computer is loading Safe Mode. This is a way to load Windows operating system without any extra software or programs, using the most basic drivers and softw ... HP Pavilion xt938 PC Desktop
Windows Installer opens Word, so I have a 10 second delay opening a doc and Excel opens with a stdole32.tlb error window every time.
It is* Font Definitions */\015\012 @font-face\015\012\011{font-family:SimSun;\015\012\011panose-1:2 1 6 0 3 1 1 1 1 1;\015\012\011mso-font-alt:宋体;\015\012\011mso-font-charset:134;\015\012\011mso-generic-font-family:auto;\015\012\011mso- ... PC Desktops