Having problems with your iiyama Vision Master Pro 454 19" CRT Monitor ?

The monitor got very bright for some seconds

\015 The screen got very bright for some seconds once and a while for about a year. Than it died. Can I fix that myself? And would the costs of the parts be worth the trouble.\015

Answers :

The picture tube in your monitor has failed, and has damaged other parts in the process. The bright screen was due to high voltage to the tube coming back into areas it shouldn't go.

When this happens, it's time to throw the monitor away and get a new one. The cost of repair (and no, this isn't a repair you could do yourself) would exceed the price of a new flat-screen monitor. It's also unlikely you'd find anyone willing to service this anyway.
Repair Help & Product Troubleshooting for iiyama Vision Master Pro 454 19" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor going black


My HP f1703 is almost 3 years old and started having this same problem. My fix got the display to stay on. Don't know how long this fix will work. I set the monitor brightness to 51 and contrast to 41. You may have to adjust to your levels to your ap ... HP Pavilion F1703 17" LCD Monitor

The monitor got very bright for some seconds


The picture tube in your monitor has failed, and has damaged other parts in the process. The bright screen was due to high voltage to the tube coming back into areas it shouldn't go.When this happens, it's time to throw the monitor away a ... iiyama Vision Master Pro 454 19" CRT Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Sony GDM-F500R (G1 Chassis) has trouble turning on


Sometimes relay contacts get "sticky" from arc oxide corrosion whenever enough electricity is passed from metal to metal...in a perfect mechanical relay, the relay would be sealed in a vacuum. Try swapping relays to transfer the problem. If you can t ... Sony GDM F500R Monitor

Monitor turns off after 4-5 seconds


Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

Yellowing screen after 15 minute great working!


Styber,\015\012While CRT monitors are very good with color rendition, they do have a warm up time (at least 30 minutes before to get the truest color they can give) they also lose brightness and contrast over time. Since you do Photshop work a ... HP 91 (White) 19" CRT Monitor

My 15" LCD monitor TTX went to sleep mode and never return back


Mike_garzan, Your monitor will need some work done on it!! Do you know the "flashlight trick" that every owner of an LCD monitor with "cold cathode-fluorescent-lamps" should know how to do when the BLACK screen of death makes it presence known? Do th ... Elo TTX 9154 15 Inch LCD BLACK W/ RESISTIVE SERIAL Interface Monitor

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

Monitor display Problem


... Famous Brand FP7317 17" LCD Monitor

Syncmaster 910t blinks image perfectly once and goes back to black


I've had same problem and I fixed it!With good CCFLs, clean supplying voltages, all good capacitors and resoldered junctions, the backlight still turns on for fraction of second and goes off.It is in the Power Supply / Inverter board. In ... Samsung SyncMaster 910T 19" LCD Monitor

DCLCD 19" flatscreen won't turn on correctly


Same problem here, but after using the plugging/unplugging method it eventually stopped all together. So, I took it to a local monitor repair shop (AM Stereo, Seattle). The problem is a power supply issue where the capasitors go bad. They fixed th ... Sceptre DCL 7A 17" Flat Panel LCD Monitor

Monitor; Power light on, screen blank - Samsung Syncmaster 730B 17" Flat Panel LCD Monitor


Do you have a second monitor you can switch out? Have you checked the monitor itself to make sure it's not set for digital vs. analog (or vice-versa)? Are all cables and plugs tight and secure? Has the brightness level been turned down? These are all ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

My Fujistu Amilo laptop screen is blank, I can see nothing though I laptop seems to have booted and using a combination of tab and enter I have heard the windows login dingle. How can I work out if it's the screen or the backlight and how can I make it use the second monitor I have plugged in.


Hello there,If the backlight is out, the screen image will still show up but there is no light to shine through it so you can normally see it.The test that I've used is to get into a bright area(outdoors on a sunny day) and angle the scre ... Fujitsu Siemens PC Laptops

Monitor black screen


I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

Syncmaster 226bw goes black


I think u have a problem with ur display,please contact ur service centre immediately to fix it. ... Gateway FPD2275W LCD Monitor

POWERSAVE i got given a pc from a friend and it had a dell E171FP monitor with it when i turned the power on the screen stayed blank so i pushed one of the buttons and it said it was in powersave mode and i cant get it to come out


I have A "Dell" E152FPc, and I have found an open transistor (Q201) on the Power Supply Board. My monitor comes on nice and bright for approximately 2 seconds, then goes dark; the power LED is steady. The voltage to the PWM IC is waky.Before yo ... Dell E171FPb 17" TFT LCD Flat Panel Monitor

HP Pavillion dv6700 - black screen


Do the following without the battery inserted.\015\012\015\012Let the computer sit with no battery for 24 hours. Do not put the battery in at all. Try using your original memory stick ONLY, with no hard drive and see if it will POST. If i ... HP Pavilion DV6700T Notebook PC

Using my broken screen as a bedside lamp


More than likely it is drawing too much voltage, some of the older supplies would shut off after a few seconds if it was drawing too much, the fix was to go into settings on the monitor and turn the brightness down, for you, you could put a res ... Acer AL1714 17" LCD Monitor

Display goes blank when brightness is above 70 percent


This is a generic symptom that could happen to any LCD\015\012monitor.\015\012\015\012The following is a generic answer applicable to most.\015\012\015\012\015\012\015\012Two possible causes are bad capacitors or a bad light inside\ ... Mag Innovision LT776s 17" LCD Monitor

Lcd lights got dimmer


First check to make sure the power adapter is connected to the laptop properly, if not it runs off the battery and the display is dimmer.\015\012Second check the brightness setting, you can adjust the brightness by pressing the Fn key plus the ... Compaq Presario M2000 Notebook

X191w blank screen after 2 seconds


Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Hi.. i have a 28" monitor which has been working fine. just started this issue. It is being used with a notebook comuter as a second monitor. when turned on the monitor shows the screen for about 40 seconds and then goes to black. I cant get it to kee the image in lace. always going to black after about 40 secs.


I feel this is a resolution problem that your laptop wants to display a higher resolution then the monitor can handle or you got a issue with the logic board inside things to try is hooking it up to a different system if that works you n ... Hannspree 28" Widescreen Flat-Panel LCD HD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4955 seconds