Having problems with your Gateway Media Center 610XL PC Desktop ?

No signal cable message

\015 Gate way 610 no signal cable message\015

Answers :

No punctuation, no sentence, no question; no answer!
Repair Help & Product Troubleshooting for Gateway Media Center 610XL PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

An Out of range box


Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors

No signal converter box.


Why is this in the computer section? \015\012\015\012Anyway, don't exchange the box just yet! First, can you access the converter's menu? Because mine automatically comes up with the "no signal, call customer service" message, but I ca ... PC Desktops

Error message on Syncmaster- check signal cable


Sounds like it might be a graphics card. if u have an old graphics or vidio card, open the case and remove your card then install the old one. if it works now youll know your card is bad. If u have an old video card and an open pci slot install i ... Samsung SyncMaster 940B Monitor

Check signal message when data cable unplugged. blank screen when data cable plugged


This problem is most likely to be caused by a bent or broken pin on the CRT video cable at the VGA connector, OR, this could also be caused by a damaged VGA connector on the back of the laptop.\015\012\015\012If neither VGA connector is at fault, the ... IBM E74 17" CRT Monitor

No signal on first boot


I think is a power supply problem,, ... Nokia 445 Pro 21" CRT Monitor

The lcd monitor does not have a picture and will not shut off when it has power.


\015\012§ Turn Off the Monitor.\015\012§ Unplug all the Cables from the back of the Monitor. \015\012 ... PC Desktops

My samsung 940N acts like a florescent tube, tries to start and doesn't


Use the self test feature.. follow the steps..\015\012\015\0121. Turn off both your computer and the monitor.\015\0122. Unplug the video cable from the back of the computer.\015\0123. Turn on the monitor.\015\012If the m ... Samsung SyncMaster 940N 19 inch LCD Monitor

HI no startup beep on my emachine and no signal onscreen


According to the gateway book, the "no signal" message shows if leads are removed and means the monitor is working fine, i have checked conections and all is ok. Connecting another hardrive made no difference.  ... E-Machines eMachines Desktop PC

Black screen with message about no input signal


Might be something wrong with your monitor's data cable ... Sony SDM-HS95P/B 19" LCD Monitor

Hi there, my viewsonic monitor VX912 is not getting a signal from my computer. I first checked to see if the connections were good. No joy ther! so I then tried to see if the cable was faulty(my monitor has two inputs:D-SUB a blue cable and DVI which has a white cable) by connecting my laptops TV-OUT port to my TVs PC port. Got a signal but then after a while a message came up saying "unsupported signal please set PC output" and then I lost the signal, so I guess the cable is fine?I did the sam


Is your tv HD, it may have worked on the digital signal, but perhaps it switched to a HD program, and it doesnot support that HD signal, If not it may be a switching problem ... Evesham PC Desktops

No signal on startup


If monitor is gave no siganl .Firstaly Check monitor Signal Cable For connected of ur system vga port. if Siganal cable is connected ur pc then Check ur System IF system is gave the Display anthore monitor . Then Proble is ur monitor signal Cable .S ... Princeton Digital VL2018W Monitor

Message: check your PC and signal cable


That Means the Monitor Does Not Detect Your PC..Check The Video Cables And See If they Are Fully Connected ... Computer Monitors

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Monitor and keyboard won't turn on


A couple of things here:\015\012\015\0121) The flashing light and signal message indicate that the monitor is functioning but is not receiving a signal from the computer.\015\012\015\0122) The memory that you added is liklely ... PC Desktops

Boot up computer. Nothing comes up on screen. Get a message:"information. No input signal." Everything is plugged in correctly.


\015\012check the cable on the monitor screen\015\012if after removing the data cable from the computer and it has no vertical color screen then\015\012try other dat ... PC Desktops

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Viewsonic VA712b issuses


Digital-to-Analog Converter - DAC\015\012\015\012\015\012\015\012\015\012When referring to Audio, DAC is also short for Digital-to-Analog Converter and is the pro ... ViewSonic VA712B 17" Flat Panel LCD Monitor

More problems lol


Hy Ashley,\015\012\015\012First up,\015\012Your channel 1 no 80 conductor cable, \015\012tell me that you have mounted a new HDD to your computer,\015\012- -\015\ ... PC Desktops

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.


OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Dell 1800FP, no signal found (analog). Green LED on, get message


Check if your signal cable is properly connected to your system unit and make sure that non of the pins of your signal cable is broken.if any of the pins are broken,try and change the whole signal cable and re-connect it again\015\012after foll ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

No input signal


Hi, there is a posibility that the issue is caused by your system unit. NO INPUT SIGNAL occurs when system unit fails to start properly. One possible reason is the power good signal was not sent back by power supply to mother board. You can check ... Acer Aspire L310 (ASL310UD631A) PC Desktop

I have s samsung monitor T220 and will not come to show that my computer is connected, I have a message on the screen that says check signal cable with the word digital at the bottom of the message box. The cable was changed and I still have the message. Any suggestions? Thanks in advance


Oh i had the same issue with T220, remove all ur memories , disconnect the monitor , remove the graphic card, clean it and instert it back , insert the memories and then connect the monitor to analog cabl;e first,,, put it on and then shut it down an ... Computer Monitors

Samsung GH19LS LCD Monitor wont display computer signals


You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3568 seconds