Having problems with your Gateway FPD2275W LCD Monitor ?

I want to remove stand 'holder' so I can mount on an Atdec V-AT-DB Dual Focus LCD Desk Mount

\015 I bought two Acer 19" p191w monitors (sometimes referred to as p191wd). I want to take off the stand AND THE STAND "HOLDER" (that's attached to the back of each monitor) so I may mount each on an Atdec V-AT-DB dual focus LCD desk mount (it holds two monitors so you can move them around, pivot the monitors, etc. It looks pretty cool!)How can I take off the stand 'holder' (the female part that receives the male part of the stand itself). The female part is affixed to the monitor and I can't figure out how to remove it.Any help?! Surely this has to be possible! I read it is "wall mountable", and it has four screw holes for doing this.See https://www.pacificgeek.com/product.asp?id=86499&c=232&s=947 for info on this monitor.Thanks!\015

Answers :

This is an old post but for others with the same problem;
\015\012
\015\012There are two plastic snap on covers, one on each side of the stand hinge. Slide each small cover in towards hinge. Pry up each plastic cover. Remove hinge screws, hinge, replace screws, replace plastic covers.
I have the same problem and I hate to admit it but I'm on the verge of putting a blade in my hand held router and cutting the plastic away. I don't want to do that since maybe I may need the mount someday, but...
Repair Help & Product Troubleshooting for Gateway FPD2275W LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I want to remove stand 'holder' so I can mount on an Atdec V-AT-DB Dual Focus LCD Desk Mount


This is an old post but for others with the same problem;\015\012\015\012There are two plastic snap on covers, one on each side of the stand hinge. Slide each small cover in towards hinge. Pry up each plastic cover. Remove hinge screws, h ... Gateway FPD2275W LCD Monitor

Monitor stand screws


Adjustible Dual Monitor Arms\012 \012Organize your office desk with best dual desk mount monitor arms. Our desktop monitor stands are easy to install & adjust with more flexibility. Order Now!\012 \012Know more here: ... Acer AL2423W LCD Monitor

No sound from headset plugged into monitor


From the manual I found, this model does NOT support ANY audio connections.\015\012http://www.p4c.philips.com/files/1/170b1a/170b1a_dfu_aen.p ... PC Desktops

How can i take the bottom stand of my monitor before i mount it t


Generally speaking, LCD monitors have a plastic cover that snaps onto the back side which covers the hinge and screws holding the base plate 'post' to the monitor. Remove the cover, and remove the screws. The post that engages the base plate will c ... Hyundai Computer Monitors

How to add second monitor to asus cg5270? - ASUS Eee PC 1000H Laptop


The Asus Essentio CG5270 is a desktop computer, so I see it was placed in the wrong category. No prob!Certain selected models of the Essentio CG5270 come with a graphics card. If you have this graphics card, you can use two monitors at th ... ASUS Eee PC 1000H Laptop

Display goes blank when brightness is above 70 percent


This is a generic symptom that could happen to any LCD\015\012monitor.\015\012\015\012The following is a generic answer applicable to most.\015\012\015\012\015\012\015\012Two possible causes are bad capacitors or a bad light inside\ ... Mag Innovision LT776s 17" LCD Monitor

How to open a ACER AL1713 monitor


Hi - there are more hidden screws so you need to undo those:\015\012\015\012Where the stand joins on the back, there are two plastic bits either side of the pivot. They don't look as if they come off but if you squeeze them ... Acer AL1713 17" LCD Monitor

Samsung Synchmaster 940N fault


I've had the same problem with mine and just fixed it (well, it's still working now, so fingers crossed).The problem is the high-voltage supply to the backlight is breaking down due to a discharge path somewhere.I took my moni ... Samsung SyncMaster 940N Flat panel Monitor

Optiquest Q9 After about 14 months, my 19" LCD Optiquest Q9 monitor suddenly got very dark ( the bottom 1/4 was still viewable, though dark) and then went blank. After it cools for a while I can power it back up with the same results. There is a faint click when it goes black. I have replaced it with another 19" LCD ( different MFG.) which is working fine, but hate to throw this one away if it is repairable. The screen itself seems fine with no pixels missing at the time it went dark. There are


I had this problem with my Q9 and I was glad to find the FixYa website with help. But I will offer more detailed info for novices to make sure you find the capacitors. First of all, it is not easy trying to find out how to open the monitor up! First, ... ViewSonic Optiquest Q9b 19" Flat Panel LCD Monitor

Extended Desktop on Dell Dimensions 4600


Yes your right..leave it set to AUTO BUT ONLY USE THE ATI CHIP SET VIDEO CARDS.\015\012\015\012\015\012Dell Dimension 4600\015\012We saw great image quality from the 17-inch E171FP analog LCD monitor that accompanied our review syst ... Dell Dimension 4600 PC Desktop

My 2gb ram stick died, so I tried upgrade to 4gb


Most appreciated naturalgal66. Perhaps you would like more information, to put together some of the information I stated in the Clarifications.This is a motherboard block diagram,http://en.wikipedia.org/wiki/File:Motherb ... HP Pavilion a6600f Desktop PC

I have two HP w2408 lcd moniotors I want to connect to my HP Pavilion desk top. What do I need to do so that i can display separate documents on each screen?


You going to need a good grafics card pci express interface whid 512 mb or ram and the apropriate drivers for it and afther you plug in the 2 monitors your pc will indentifie dual monitors and you can expan the desktop ... HP Pavilion Desktop with Intel Pentium Dual-Core Processor E2180

Toshiba desk-top screen is quite dim. why?


1. adjust the monitors brightness and contrast\015\0122. adjusting the brightness and contrast with your video card software\015\012\015\012if that fails\015\012\015\0121. decide if the monitor is worth the money to repa ... Computer Monitors

I HAVE A 22" WESTINGHOUSE LCD MONITOR L192 ONW AND THE PROBLEM I HAVE IS THAT I CANNOT ROTATE THE SCREEN 180 DEGREES.THE STAND BROKE AND I WANT TO MOUNT IT ON MY WALL UPSIDE-DOWN BUT IT TELLS ME IT IS UNABLE TO DO SO AND I HAVE TRIED VARIOUS CONFIGURATIONS, RESPONSE TIMES AND RESOLUTION SETTINGS...


Try CTRL +ALT+ (Arrow keys)to rotate the screen. ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

I cannot open my zoombrowser 6.1 software.


\015\012 Why does Canon ZoomBrowser EX always crash on Vista?\015\012By ... Canon ES-E1 EOS Link (4593a006) for PC

S0000 Presario MB was diagnosed as bad by Staples techs..


HP Support, and the main menu support page for the Compaq Presario S6900NX Desktop PC, ... PC Desktops

Non crispy display


Six to seven years is about the usual life of a picture tube, and then you start seeing signs of aging. Poor focus is one common symptom (the loss of crispness you noticed). There is an internal focus adjustment, but it usually can't compensate for t ... LG Flatron 775FT 17" CRT Monitor

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

What are differences between single core and dual core processor?


A dual-core processor is much faster than a single-core processor since it is two processors mounted on the same die. Each of the two processors are the exact same, one mounted on the top, and the other mounted on the bottom of the die. Since t ... Computer Processors

New Computer Hi i want to buy a new computer from a shop called Big Ben Computers. I want it for playing games such as Counter Strike Source and Unreal Tournament 3 which needs very high System Specs. What Parts Should I get? Here's their website: www.bigbencomputers.com.au


Hi im David,1. To start to buying a computer, you need a Standard ATX case, they sell only ATX cases so you can choose one at the shop that suits you. Then you might want to get a power supply because the pne that comes with the case will ... PC Desktops

Acer LCD (AL1917W)


After removing the back cover screws that you saw, ok, there is a screw\015\012under the stand holder. Remove the cover that covers the stand holder\015\012joints. you can remove it using a flat head screw driver, it is\015\012removeable only it appe ... Acer AL1917W LCD Monitor

Screens playing up


Let me give you the link to the free download of the Service Manual, for the Compaq Evo n1010v series of Notebook PC's, to start,http:// ... HP Compaq Evo Notebook N1015v (470046-573)

How do I remove the stand?


Looking at the manual\015\012\015\012 ... Acer AL1913 19" LCD Monitor

I have a stupid question


Most time the stand mount scrrews are covered up by plastic covers. Try moving the rear plastic parts to see if they pop off.\015\012Mike ... Computer Monitors

Speakers i have a packard bell computer screen with speakers which attach 2 side of screen, i need a new mother board for my packard bell hard drive stack so at the moment im usin a mesh computers PLC hard drive stack and ive plugged all the speaker cables in but i have been left with 1 cable which doesnt fit anywere, the cable has quite a big end compared 2 the other cables the number on the speaker cable wire is E148000, please could you help me with either were it goes or if i can actually us


Packard Bell (160248-01) Computer Speakers with a 12\012volt power source worked OK, \012\012Tried a 9 volt and it also worked.\012\012This pa ... Packard Bell (160248-01) Computer Speakers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5974 seconds