Having problems with your Gateway FPD2275W LCD Monitor ?

Monitor has power but says not receiving signal and frequency out

\015 Monitor has power but says not receiving signal\015

Answers :

Hi, this might be a cable plugged out from your graphics card or from your monitor. Check that first. If the cable fits ok, try changing it with another one to see if it is ok or broken. If it wont do anything, it probabbly needs to go to service for mainboard replacement. Something simillar happened to me too.
Repair Help & Product Troubleshooting for Gateway FPD2275W LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor has power but says not receiving signal and frequency out


Hi, this might be a cable plugged out from your graphics card or from your monitor. Check that first. If the cable fits ok, try changing it with another one to see if it is ok or broken. If it wont do anything, it probabbly needs to go to service for ... Gateway FPD2275W LCD Monitor

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

Blank screen Help. I have a compaq presario sr1103wm. When I turn on the computer the monitor acts like it is getting no power. Also the keyboard lights don't come on. I tried replacing the video card and got the same results. I also tried a different monitor and cable with still the same results. Does anyone have any sugestions. Could it be the mother board?


When you say "When I turn on the computer the monitor acts like it is getting no power", do you mean the light on monitor doesn't come on or it does and it states it has "No Signal"? If it says no signal then it is receiving power just no signal from ... Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

All of the sudden, no picture vis DVI interface.


... Dell UltraSharp 2407WFP 24" LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Acer LCD Monitor - Stuck Displaying green


Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc. If the connectors are Ok, it could be the conver ... Gateway FPD2275W LCD Monitor

In power save mode


The monitor is not receiving signal from the computer. Is the power light on on the computer? If so - press and hold power button on computer until the power light goes off, then press again to restart. If the computer starts and you still have no ... Dell E173FP 17" LCD Monitor

Nothing comes up on the screen


The monitor connected to the system is set to receive video signals from the DVI port on the video card and it is not getting a signal.\015\012\015\012Possible Causes:\015\012\015\012Monitor is connected via VGA ... Dell OptiPlex GX280 PC Desktop

Monitor button flashes green light


Ok for the the pricey one horizontal output transistor or flyback, or both is defective.Next is your main filter capacitor is leaky or drying up already. Try to check for bloated capacitor.Third check your signal cable to moni ... Computer Monitors

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Monitor stopped working...checked all connections...light won't stay on green. bought a new monitor to replace it and that monitor says "no signal". is this a problem with the dell computer and not the monitor?


Your monitor is going into power saving mode. When it receives no video signal from the computer, it will stay powered for a few seconds before giving up and presuming the PC is off hence why it stays green for a while, then goes orange.\015\0 ... Dell Computer Monitors

No signal to monitor


If u have a two VGA output in ur PC..try to use the build in VGA port...if doesn't appear... Try the one VGA port ... PC Desktops

Black monitor no power


Okay, another thought is that you're using a video card which requires power from PCIe power connector(s) or your typical 4 pin molex connector. If it is not receiving that signal, it will not display anything on your monitor. The other thought might ... PC Desktops

Says no signal on monitor. - E-Machines eMachines Desktop PC


The monitor is telling you that it is functioning properly (it works). It is also saying that it isn't receiving and signal from a computer. This can happen when-** computer is turned off but monitor is on (this can occur, for example, when the ... E-Machines eMachines Desktop PC

Not booting up showing green light wont show on screen


Power supply failing. Inside your personal computer power supply are components that can easily fail, and have been a known issue. Nor just Compaq computers, but a vast majority of pre-made computers.Electrolytic Capacitors. ... HP Compaq Presario SR1610NX (ED865AA) PC Desktop

My monitor keeps saying monitor going to sleep waht do u o


It shows that the monitor is going to the power saver mode.It is not a problem of the monitor.This happens when there are no signals received on the monitor.It turns back to the normal mode when a signal is received on it. ... HP w1907 LCD Monitor

It is plugged into the computer, and it is powered on, but the monitor screen says that there is no signal. I am certain that the monitor is plugged into the computer. I checked it via control panel and it says that the monitor is working properly.


Have you checked if its on the correct source,, analog or digital press the source button it will cycle to both and if its receiving a signal from the computer it should show a picture.\015\012Good luck ... Acer AL1916W 19" LCD Monitor

Will not stay on


Under normal circumstances, a computer monitor will not remain powered up if it is not receiving a signal from the cpu. Whether or not this is the problem in your case is difficult to say. First steps would be to check all the cable connections to ... LaCie Electron 19" CRT Monitor

Turns on, cd light comes on but cpu does not boot and light does not come on, the monitor says "no signal" . Cpu dpes not shut off at the button anymore. I have to unplug it to turn it off. HELP! By the way I read to unplug and hold power button for 30 sec then plug it back in, did'nt work. Just want to know if theres something I can do myself or do I have to give in and take it to get repaired.


You should get it repaired. That is likely a power supply failure. Yes, I see you have power, but I still say power supply, because there are 2 types of power: There is Motherboard power and there is CPU power. If CPU power is not correctly flowing, ... Acer Aspire M1100-U1402A Refurbished AMD Desktop PC - AMD Athlon X2 4400+ , 2GB DDR2, 320 SATA II, D

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

DELL E153FPf doesn't show the image


OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

Dell 1800FP, no signal found (analog). Green LED on, get message


Check if your signal cable is properly connected to your system unit and make sure that non of the pins of your signal cable is broken.if any of the pins are broken,try and change the whole signal cable and re-connect it again\015\012after foll ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

Zenith L13V36 When I turn-on the power button to my 13" television, the screen goes on for about 1/2 second with no sound or picture (it's just black, but you can see the channel number in the upper right hand corner), then it automatically shuts off. What to do? Thanks so much for any assistance.


That sounds like a bad power adapter, a bad inverter , or a bad controller board.When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.\015\012\015\012\015\012\015\012Try fi ... Zenith L13V36 13" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7375 seconds