Having problems with your Gateway FPD1760 Monitor ?
My monito is not getting signal - Gateway FPD1760 Monitor
If your monitor says no signal and goes to sleep when your pc is on then the first thing to check is if it's plugged into the correct socket. I've had people tell me yes to this question and when I see them all I do is plug the monitor into the right socket. They had an additional graphics card as well as the on board graphics output. If this is not the issue then the graphics output is probably shot, add new graphics card or replace motherboard.
Repair Help & Product Troubleshooting for Gateway FPD1760 Monitor
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My monito is not getting signal - Gateway FPD1760 Monitor
If your monitor says no signal and goes to sleep when your pc is on then the first thing to check is if it's plugged into the correct socket. I've had people tell me yes to this question and when I see them all I do is plug the monitor into the right ... Gateway FPD1760 Monitor
Screen completely white
One gets to open it up and find out where the signal from the computer is lay aside. Hunt up the model number on the inside of the monitor (the ODM part numbers) for the service manuals if you can use them. Otherwise you can call Gateway or look fo ... Gateway FPD1760 17" LCD Monitor
No Video Signal
Try resetting the bios. On the motherboard there is a battery that looks like a watch battery. Remove the battery, then replace it again. (make sure the computer is unplugged from the wall socket when you do this)\015\012\015\012Does th ... Gateway GT4015E AMD Athlon 64 3500+ 2.2GHz / 1GB DDR / 200GB HDD / DVDRW DL / DVD-Rom / Flash PC Desktop
Monitor goes into power saver mode
Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop
Monitors won't work with Gateway Desktop
The video adapter has probably gone to it's reward. Some Gateways have the adapter built onto the motherboard. Some have separate video cards plugged into the motherboard. Pop the case open and check to see if the connector for the monitor is a ... Gateway PC Desktops
Gateway monitor (FDP1965) Power/video problem
You have a problem with your lcd..get it fixed by technicians... ... Gateway FPD1975W 19" LCD Monitor
I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we
Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC
Computer "turns on" i hear four to five beeps, but the monitor gets no signal. a friend gave me the computer, only once did i see it boot up fully but it froze up so i had to restart it and it wont work. everytime i try i get the same thing four or five beeps and monitor says no signal. so i dont know whats happening. its a gateway computer runing windows xp. thats all i know. i know the monitor is good cause i tested it on another computer.
Without knowing the exact frequency/length of the beeps my first guess would be a bad stick of ram or a bad video card. If there is more than one stick of ram in the computer try it with one of the sticks pulled, pulling each stick until it does boo ... Gateway GT5028 PC Desktop
Hello, I have a Gateway model GT5662, stock setup - Will not boot
Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC
My Gateway GT5685E powers up as does the monitor by I get no signal to the monitor (running Vista) - I have checked cables and the monitor seems to be fine, I have also tried to power up with the operating system CD but the same thing occurs. PLEASE TELL ME THIS ISN'T AS SERIOUS AS IT SEEMS dUANE
Well, there is good news and bad news...first, since it is a desktop and the video is integrated into the motherboard...if the integrated card fails, you can install a midlevel video card intot an empty PCI-E slot and have great graphics again for ar ... Gateway GT5685E Desktop Computer - Intel Core Duo E4600 Dual Core Processor, 4GB DDR2, 500GB HD, 18X...
Gateway Monitor keeps going black
Alicia, Your monitor digital board is OK. The problem is with the power supply/ Inverter board(s) in back of the LCD/LPD Panel that you look at. You will need to question Gateway to see if they have a swapout program where you send them $30-$60 and y ... Gateway FPD1760 Monitor
No Video Signal
If you can't use the onboard video and it does POST or the PCI-E video card does show anything, most likely the motherboard is toasted. Apparenty gateway uses real poor quality power supplie and motherboards.\015\012\015\012I have the sam ... Gateway GT5228 PC Desktop
Monitor no longer will switch to Analog (VGA) source.
Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors
Gateway flat LCD dead - PC Desktops
I'm not sure if your referring to the lcd monitor (gateway brand) or a laptop's lcd screen not working anymore.\015\012\015\0121. if it's an lcd monitor...\015\012a. test monitor in a different pc before assuming the problem is the ... PC Desktops
My desktop Gateway computer received an e-mail. It showed the first page of an attachment with a message in the middle, saying 'No signal". I turned the computer Off to get rid of the message. When I stsrted the computer again I could not get it connected to the monitor. When I try to connect it, first I got "Gateway" Then I got the message: "No Signal". Then the monitor showed the red light indicating it is Off. myde
Greetings,Are you on wireless connection ?Keep us posted and thank you for using our service.FixYa for all your troubleshooting needs. ... Gateway PC Desktops
Screen goes off showing VGA with cable on the screen
This looks like a bad cable connection. Try using a new cable for the connection between the computer and monitor. If that does not work test you computer on another monitor to make sure you are getting signal output from the video card.Also check th ... Gateway GM5259E PC Desktop
No video signal to Monitor.
Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or something o ... E-Machines eMachines Desktop PC
Gateway FPD1760TFT LCD monitor
Problem\015\0121. turn on computer\015\0122. monitor receives signal, it looks like its working\015\0123. it goes through some steps and then the monitor says "no signal" and kind of stays in limbo with fans running, etc.\015\ ... Gateway FPD1760 17" LCD Monitor
Power outage,monitor wont power up,hope its not fried
I may or may not make your day. (But I wish you to know that I want to! lol!)I believe it's not your monitor, I believe it's your computer. (Oh, that helped, huh!) However, don't freak out yet, it maybe a simple fix.Let's test ... Gateway FPD2275W LCD Monitor
My Gateway M 6755 gave me a blue screen warning and shut down. My hard drive is good but I get no screen, even if I plug it into my PC monitor or LCDTV. Is this a video card trouble? Is there a way to check? Is there a function key that might be off, keeping me from using an external monitor?
It may not send a signal to an external monitor automatically. Look closely at your function keys for anything that remotely resembles a monitor. Press Fn and the Function key that you think might be it. This will toggle between just the laptop // ... Gateway PC Laptops
The model number on my monitor is tft19w80ps it's a black 19" lcd gateway monitor... all it's menus are in a foreign language and there is something that pops up every 5 minutes or so that I can't get rid of...any ideas of how to get this to english and get rid of the pop up?
Don't know about the 5- minute pop-up, but this is how you get it back to english:\015\012\015\012Turn the monitor on, connect a VGA cable and make sure it's receiving a signal.\015\012 ... AOC LM742 17" LCD Monitor
Can't get monitor to power on
I have a similar switch on mine, although mine is a Gateway. So my solution is going to assume the same indicators and functionality.\015\012\015\012On mine, a blue-violet power switch indicates it is off, red indicates standby mode, and ... LG L206WTY-BF Monitor
Screen just showing white.
This is definitely a problem with the monitor ONLY. The fact that you don't even see the Gateway splash sign when you power on the monitor or even the symbol indicating, which source you are using is very telling.This sort of problem usua ... Gateway HD2200 LCD Monitor
I have a gateway gm5478 model pc with a 22inch lcd gateway fpd2275w monitor(purchased 12/07) for family use and the monitor started giving me the no signal display about 3-4 months ago and has increased in frequency to the point now that I once it happens I can't get it to recognize the computer. Did all the usual fixes reset and powered everything down,disconnected and then reconnected after a couple of minutes.
Hi there, This could go two ways, neither of them good.The first possible thing could be that the monitor is on its last legs, and had been dying for those months. You can verify this by trying to hook it up to another PC if p ... PC Desktops
Hd display gateway monitor is working but has no signal
Hi\015\012\015\012If this is still under warranty, then Gateway (MPC) can repair this. Probably you homeowners insurance will pay for it. Make sure that the monitor data cable is plugged in correctly. Whenever we have storm my wife unp ... Computer Monitors