Having problems with your Gateway 506GR PC Desktop ?

My Gateway 500s monitor is stuck in power save mode

\015 My gateway 500s computer monitor is stuck in power save mode. The computer boots up, but the monitor is stuck in power save mode no matter what I do (move mouse, press keys on the keyboard).\015

Answers :

Try tapping the F8 key while booting the computer, you will get the start up menu, choose safe mode, when you log on, go to the display settings, that is right click on the desktop, properties, screen saver, advanced and make sure that hibernation is off, along with turn off disks or whatever , probably see turn off monitor after XX minutes, I make ours 15 minutes (150 computers and servers), I don't let the disks turn off. Choose always on also, not home/office. Try this and see if these settings help.
\015\0121r1sh
\015\012A+
\015\012Net+
\015\012MCP
Repair Help & Product Troubleshooting for Gateway 506GR PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Gateway 500s monitor is stuck in power save mode


Try tapping the F8 key while booting the computer, you will get the start up menu, choose safe mode, when you log on, go to the display settings, that is right click on the desktop, properties, screen saver, advanced and make sure that hibernation is ... Gateway 506GR PC Desktop

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

My ibm desk top is stuck in power save mode monitor won't work


So the only way you have to act is, turned off and directly on the mainboard, so do it carefully.\015\012You'll have to find out, where, on the mainboard is located the battery, (a small coin like\015\012unpluggable metallic piece) ... PC Desktops

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Gateway GT5220 PC Desktop

Stuck in power save mode


Stlmeuzyk, Internal "switch-mode-power-supply"/"ccfl-inverter-supply" will probably need to be refurbished (repaired). Use Dell warranty first if valid option! Try monitor on different pc or verify your pc is working properly with old, but known-good ... Dell E228WFP LCD Monitor

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Computer stuck in power saving mode


... ViewSonic VA1703wb Monitor

My Dell monitor is stuck in Power Save Mode. Any


The monitor is not receiving signal from the computer. Verify the computer is on and the monitor input is set to the correct mode or auto. Try another monitor if possible. ... Computer Monitors

Problem w/Dell E176FPf monitor stuck in power save mode


Ok if it the monitor works fine on another unit discount it out of the equation as a monitor problem.I would suspect the driver on the PC that delivers the problem, especially the video card.. Check that the cable is also on tightly. remo ... Dell E153FP 15" LCD Monitor

LG Flatron W2252TQ Monitor stuck in digital power saving mode


Raymond, (did) you solve the problem?i've got exactly the same problem and i've read more similar complaints on the internetgriris ... LG W2252TQ Monitor

Dell E173FP stuck in power save mode


Good morning! kindly try to review/check the operations manual of your monitor as there might be proper set-up settings / compatibility requirements to a certain PC. best regards ... Dell Dimension E520 PC Desktop

LG Flatron L1710S Monitor stuck in Power Save Mode


Try wiggling the Cord on the backside of the monitor.. Not the Power Plug Cord, The Other Cord that attaches to the PC. Do this once the monitor turns off , grab ahold of the cord about 2 inches from the back of the monitor, then bend the cord to the ... LG Flatron L1710S 17" LCD Monitor

My Dell E176FPc monitor seems to be stuck in power saver mode. There is no way to access the on screen menu. When the monitor is unplugged from the compouter, it shows a self test screen with 3 colored bars underneath it. It just floats around the screen. As soon as you plug it into the computer, the power light goed to yellow. When you press the menu button the message appears appears that the monitor is in power save mode.


Try the monitor if you can on another computer and see if it stays in power save mode. If it does then the monitor is bad.If you try the monitor on another computer and you get video then that means theres an issue with the original comp ... Dell E176FPC Monitor

Monitor stuck in Power Save Mode


Yes look like your nvidia run out of juice you can look at nvidia 7200 le or maibe 8200 gs that will be a reasonable price / quality grafics cads for a upgrade of the 6800 thanks ... Dell XPS 400 PC Desktop

Second monitor - 'power save' mode.


Dell m782 monitor will not come out of powersave mode unless I turn the PC on and off several times ... LG L1918S-BN (Black) Monitor

Old monitor not recognized by new computer, stuck in power save.


... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

LG w2361vg sometimes get stuck in DVI Power Saving Mode


Maybe you can update your video card driver. My wife notebook is connected at times to my DELL17" flat screen and ever so often it cuts off in the middle of something. I update the video driver and reset the monitor to factory settings and it's worki ... LG L1915S 19" LCD Monitor

Gateway monitor FPD1975W won't display


Same problem - unplug both computer and monitor - hold power button for monitor for 15-30 seconds...then power it back on and then power on the computer. Seems from other sites there is a power issue with the monitor - this worked for me. ... Gateway FPD1975W 19" LCD Monitor

When turn on the gateway screen apear, but the monitor turn off or black and not apear nothing my computer is gateway profile 4 all in one


Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in the left hand pane ... Gateway Profile 4 All In One (MPN PROFILE4SE) PC Desktop

Dell E173FP stuck in power save mode


Just had the same problem... what worked for me was simple. Unplug the cable from the monitor, hit the power button a few times until Dell screen poped up with a few color bars because it knew it was no longer connected to a PC. Then plugged the ca ... Dell E173FP 17" LCD Monitor

My gateway monitor shows a picture for about 1 second then turns to blacked out screen with power light still on. I can shut the power off on the monitor then turn it back on only to have it do the same thing again and again. I have switched to another monitor to check for computer problems, but all of that checks out fine.


Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.\015\012\015\012If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in th ... Gateway HD2201 22" LCD Monitor

My laptop is not giving me display. i replaced the motherboard and lcd screen cable due to the motherboard and cable being damaged. i replaced with the appropriate models etc. the laptop runs fine but there is no display coming up on the lcd screen. when i use an external monitor i need to go into safe mode to access windows. And the quality is very poor on the external monitor. the external monitor is also stuck on "vgasave" i am wondering whether this vgasave is the reason why my


The vga save is the power save mode of the display, it uses less power on that mode, it happens when there is no signal from the device its connected to. Eg, its turned off, or the output from the device is turned off.What motherboard did ... PC Laptops

Stuck in power save mode


Have you have selected the input you are using? You can switch between analog and digital input. The monitor would stay in power save if the input other than the one you are using is selected.\015\012I believe the default input is DVI. Are you ... Princeton Digital VL1916 19" LCD Monitor

Won't come out of power saving mode


Chek the connection cable between the CU and the Monitor and the power supply cable of the montor or give another outlet ... Gateway FPD 1730 17" Flat Panel LCD Monitor

Memory recall iam from chennai,india and i bought a view sonic E70B colour monitor last year.since once month its giving "memory recall ok?" and asking for yes or no.even after trying both the options its giving the same thing again .and the extension of this is ,afte few days of this "recall ok" appearing frequently,its changing contrast ,brightness ,and what not ,automatically .this is creating a lot of problem .it seems the keys at the bottom of the monitor have failed please suggest a solut


From the Users Manual for this monitor:\015\012"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. - Exception: This control does not ... ViewSonic E70 17" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7150 seconds