Having problems with your Evesham Axis PC Desktop ?

USB ports not working - Evesham Axis PC Desktop


Answers :

Method 1: Use Device Manager to scan for hardware changes\015\012\015\012 loadTOCNode(2, 'resolution');\015\012 Use\015\012Device Manager to scan for hardware changes. After your computer scans\015\012for hardware changes, it might recognize the USB device that is\015\012connected to the USB port so that you can use the device.

To scan for hardware changes, follow these steps:\015\012
    \015\012
  1. \011Click Start, and then click Run.

    Note If you are running Windows Vista, click Start, and then use the Start Search box.
  2. \015\012
  3. \011Type devmgmt.msc, and then click OK. Device Manager opens.
  4. \015\012
  5. \011In Device Manager, click your computer so that it is highlighted.
  6. \015\012
  7. \011Click Action, and then click Scan for hardware changes.
  8. \015\012
  9. \011Check the USB device to see whether it is working.
If scanning for hardware changes fixed the problem, you are finished. If this method did not fix the problem, go to Method 2.\015\012
\015\012Method 2: Restart the computer\015\012\015\012 loadTOCNode(2, 'resolution');\015\012 If\015\012scanning for new hardware did not fix the problem, try restarting the\015\012computer. After the computer has restarted, check the USB device to see\015\012whether it is working.

If restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3.\015\012
\015\012Method 3: Disable and re-enable the USB controller\015\012\015\012 loadTOCNode(2, 'resolution');\015\012 Use\015\012Device Manager to disable and re-enable all the USB controllers. This\015\012lets the controllers recover the USB port from its unresponsive\015\012condition. The USB controllers represent the USB ports in Device\015\012Manager.

To disable and re-enable the USB controllers, follow these steps:\015\012
    \015\012
  1. \011Click Start, and then click Run.

    Note If you are running Windows Vista, click Start, and then use the Start Search box.
  2. \015\012
  3. \011Type devmgmt.msc, and then click OK. Device Manager opens.
  4. \015\012
  5. \011Expand Universal Serial Bus controllers.

    Note You might have to scroll down the list to find this item.
  6. \015\012
  7. \011Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
  8. \015\012
  9. \011Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.
  10. \015\012
  11. \015\012Restart the computer. After the computer starts, Windows will\015\012automatically scan for hardware changes and reinstall all the USB\015\012controllers that you uninstalled.
  12. \015\012
  13. \011Check the USB device to see whether it is working.
Repair Help & Product Troubleshooting for Evesham Axis PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

USB ports not working - Evesham Axis PC Desktop


Method 1: Use Device Manager to scan for hardware changes\015\012\015\012 loadTOCNode(2, 'resolution');\015\012 Use\015\012Device Manager to scan for hardware changes. After your computer scans\015\012for hardware changes, i ... Evesham Axis PC Desktop

Usb flash disk not detected


There can be several reasons for Flash Drives not being detected \015\012by your computer. \015\012First your computer is not able to provide drivers for your Flash \015\012Drive. Now, for your information, you do not need to install any driver ... HP Compaq nx6110 Notebook

The flash drive purchased doesnot work when pjugged into the usb port on my desk top but it work on my lap top? How do I get it to work on my desk top


Hello claponteFIRST, THE HARDWARE SIDE:If you just purchased your flash drive, then it is using the ... PC Desktops

USB ports don't recognize memory sticks or external harddrive.


If your using a usb hub or similiar, try connecting directly to the front or the back of your machine.Do you have another USB cable to try or is the usb connector directly on the USB device?Try these steps to reinitialize your us ... HP Computer Utilities & Maintenance

Keyboard, mouse, front USBs,DVD recorder not working


Your USB ports on your computer are plug and play. If you have issues with your USB port, it is port related, driver related or device related. The following solutions will help you identify the problem to resolve your USB port issues.\012 To Id ... HP TouchSmart IQ770 PC Desktop

New Dell desktop can't recognize external hard drive


I devised these simple steps that tend to remedy quite a few issues with most USB portable / external hard drives and devices (though not always)\015\012\015\012A few things to check but assumes USB and Windows for other interfaces / ope ... Dell PC Desktops

SUN SPARCstation 5 Desktop


The sparcstation 5 is a microsparc ii system based on the sun4m architecture. Windows will only run on x86 based architecture, eg pentium. USB is too new a technology for a 13 year old computer, The machine maxes out at 256 mb ram, but if you have ... Sun SPARCstation 5 PC Desktop

USB software not installing?


USB ports on laptops are not always "powered" ports they are often "Low power" Usb ports, devices like external HDDs and webcams tend to draw too high a current to work properly on these Low power ports.\015\012\015\012A way around this i ... Acer Aspire 3680 Laptop

Year old desktop usb ports went dead. Are powered


If multiple USB ports don't work at the same time, the problem could be the USB device you are using or the USB controller. If the controler, go into Device Manager and see if any problems (? marks). If no problems, right-click on the USB Controlle ... PC Desktops

Operating System upgrade?


Re: I need to know why the USB ports are not working?Hi.That happens because Windows 98, depending on the motherboard, may need USB drivers.Usually upgrading to 2000 or XP will fix the problem.Note:USB may al ... Acer PC Desktops

Arrow wont move


Dear Fayereid01,\015\012\015\012You said "I have a dell computer and when I turn it on to the desktop the arrow wont move to go any further its a desktop with a IBM keyboard"\015\012\015\012Make sure that the mouse is p ... Dell desktop and monitor -Inspiron 530-Intel?® CoreTM2 Duo Processor E4600

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

All USB ports not working


Sounds like a shorted out board. If you use a faulty device.. these can EASILY short out the USB controllers on the motherboard. \015\012\015\012Alternative is to purchase a "PCMCIA USB expansion card" till you can replace the motherboard ... Acer Aspire 5100 Notebook

Laptop wont start up


At this point your Operating System is Corrupt and has to be reinstalled\015\012\015\012The only fix is to install your factory restore disk to Restore the System unless the notebook comes with a full system restore; you can call the com ... PC Laptops

The Belkin USB adapters that I have load and run OK on my wireless laptop. They will not load properly or run on my desktop computer which does not have built in wireless. I go through the 'Quick instalation guide' competely on the laptop; on my desktop it only goes part way through the Quick instlation and it just doesn't work. What am I doing wrong?


Check the specs for your desktop and make sure the USB protocol will work with the adapter. You didn't say how old the desktop was, but my guess would be that the adapter requires USB 2.0 and may not work with earlier types. Make sure your desktop ... PC Desktops

My USB ports don't work


Good day,,\015\012\015\012your usb port has the problem.. try to follow this steps:\015\012\015\0121. Try to check if the usb bus is installed, to do this right click on my computer \015\0122. Click manage \015\012 ... PC Desktops

This has happened once before and I think Windows XP fixed itself after some time, but I don't know how. While transferring files onto a 4gig flash drive, I got an error message that one file could not be copied as the parameter was incorrect. Then the light stayed on, on the flash drive, and nothing would ''release'' it. I impolitely pulled the drive out of the slot and now every time I plug any flash drive into either of the front side USB ports I get a message that the device has malfunctione


I have seen USB ports fried like this, by USB devices. It can render them usesless.\015\012\015\012What you can try, is go to the Device Manager, and uninstall the USB ports there. Then go up to Scan for hardware changes. That should auto ... PC Desktops

Keyboard not working - PC Desktops


Minimal information to go on. Since you didn't specify whether this is a laptop or desktop, I'll respond with the assumption that it's a desktop.Power off computer.Install new (known working) keyboard.If that doesn ... PC Desktops

Dell Latitude D800- Keyboard and mouse stop working when undocked.


First update any drivers for your dell.\015\012\015\012www.support.dell.com \015\012\015\012Is the dock a dell dock, or a universal Dock?\015\012 ... Dell Latitude D800 Notebook

Usb 2.0 ports not working on my emachines T3504


You may need to uninstall your current usb's and let Windows redetect them. click on START, SETTINGS, CONTROL PANEL, SYSTEM. Click on tab HARDWARE, click on DEVICE MANAGER. Scroll down to UNIVERSAL SERIAL BUS CONTROLLER. Delete everything ... E-Machines eMachines Desktop PC

ALL uSB Ports stopped working


Windows NT does not have USB support. If in fact you have Windows NT, the USB ports never worked. You will need to install an OS that supports USB ... HP Pavilion dv9000z Notebook

USB 2.0 Host Controller on Windows 2000 Server (Emachine 5260)


Raycrean, Windows 2000 service pack includes drivers for USB 2.0. \015\012http://support.microsoft.com/kb/819332\015\012\015\012\015\012How d ... E-Machines eMachines Desktop PC

Computer Doesn't Recognize Wired Speakers


The problem from your description would probably be that your USB audio devices has taken over as primary sound device\015\012\015\012This a regular thing with USB audio equipment\ ... Computer Speakers

IBM ThinkPad 380Z AV Hook up To Tv


From what I have been reading, the video card in the computer itself MUST support TV out. You can't just use a TV like a computer monitor...it won't work. Check the ads on eBay for those adapter cables and they will say: Check to make sure your vid ... IBM ThinkPad 380ED

USB Keyboard and mouse wont work with PS2 KVM with adapter


I had the same problem. My mouse was jumping like crazy around the screen. The problem occurs when you have a KVM with PS2 keyboard/mouse connectors and DELL with USB connectors and you have to use a PS2-to-USB adapter to link KVM with DELL. The solu ... Dell OptiPlex GX280 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7156 seconds