Having problems with your E-Machines T6528 PC Desktop ?

E machines t6528 video card

\015 Do i need a specific video card or do they all work ? how do i find out what video card to order ?\015

Answers :

  Hi, slot video card can handle a multitude of tasks. If you want, you can now buy one that'll handle the graphics processing for your computer. This is a fine and wise solution if you have modest graphical needs. After all, if a spot of word processing, watching the odd DVD and a little e-mailing is all you have in mind, then on-board graphics (VGA Port of motherboard) is fine.
  Therefore, on-board graphics is fine if your intended use is modest, not so if you're likely to even entertain the idea of playing a relatively modern 3D game with the settings on a decent level, or undertake any task that involves a degree of graphical work.

\012
    \012
  • It depends on your motherboard. If what type of video card it supports. If you have an older motherboard then it's either AGP or PCI. New Motherboards supports PCI-Express graphics card. There's also an indication what it supports. There's a label on it if it's AGP or PCI.
Repair Help & Product Troubleshooting for E-Machines T6528 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

E machines t6528 video card


  Hi, slot video card can handle a multitude of tasks. If you want, you can now buy one that'll handle the graphics processing for your computer. This is a fine and wise solution if you have modest graphical needs. After all, if a spot of word p ... E-Machines T6528 PC Desktop

E Machine T6528


The installation is usually fairly simple. The hardest part is ensuring you ordered the correct parts for your specific computer/motherboard. If you did when you open your computer you will see slots for your 1 GB DDR Ram (your existing ... E-Machines T6528 PC Desktop

-computer has gone blank


This could be anything from the monitor to bad ram or other items...i.e. software. I can't tell you what to replace but I can tell you what to check....in probable logical sequence. First, check your connections....meaning unplug and plug in again. ... Rosewill R900J 19" Flat Panel LCD Monitor

Hooking up a HP L1755 17


What is the way to get the very best picture quality when hooking up my new HP L 1755 Flat Screen Monitor to my E-Machine W3052 which is about 3 years old.First would it be compatible or the best idea to hook up VGA to VGA.DVI to DVI which means buyi ... Computer Monitors

Need help with new AGP video card for T3092 E-machines desktop


You should go in to your start-up bios and ensure the on-board video is disabled. The computer will auto-detect the video card but if the on-board video is enabled then it will cause a conflict. Let me know what happens. Good luck. ... E-Machines eMachines Desktop PC

Producr assistance In November of 2007 I purchased an eMachine model number T5230 desktop pc. My son is having trouble loading some of his games and I would like to know exactly what I need to purchase to increase the speed and memory of this particular model. Thank you. [email protected]


Many of the newer machines for sale now unfortunatly do not include a seperate and powerful video card. The machine comes with an internal video card that shares the machine's memory for video loads; iy is built into the motherboard to reduce the sel ... E-Machines eMachines Desktop PC

Toshiba satellite p25 s509 lapto video output problem im using a


What type of Video Card in in the laptop?check the laptop case on left side of keyboard sometimes stickes are there saying what type.I have seen ATI Mobility cards in laptops that have all the software working on the machine properly, but ... PC Laptops

I have Treasures of the far East. I have installed it and it goes thru the intro. When it get to the part where it is at the temple I get an error."Failed to DrawPrimitive:undetermined error has accurred." This is the 4th game I have tried to install. I have a new computer.


HiTry updating your video card drivers, those can be obtained from www.nvidia.com or www.ati.com depending on what video card the machine has.Also I would recommend that you update your directx, directx can be obtained from ... Computer Games

Looking to upgrade my Emachine W3118 Graphics Card Need Help!


Yes if you have a PCI slot your can purchase many video cards with TV-out and S-video out. Do not PCI confused with PCI-E though. Thank you ... E-Machines eMachines Desktop PC

Changing Onboard Video


Hi Andrew,\015\012\015\012The manual for Acer Veriton 5600 series is available at the Product User/EndUser Website (Downloads) at http://csd.acer.com.tw. The filename of the manual is VT5600series_EN_0403.pdf\015\012\015\012Re add-on video card - sel ... Acer Veriton 5600GT PC Desktop

I use a 37" lcd tv as a monitor for my t6528 e-machine pc. I turned it on one day and the screen was awash with a bunch of colors, then it crashed with "blue screen of death". Now when I turn it on the power light comes on but I get no Video and monitor says no signal or not support. any ideas?.


An easy way to check is if you happen to have a regular vga monitor, hook it up to the computer if you get same results then you'll need to get a new video card.\015\012Mark ... E-Machines T6528 PC Desktop

Problem after loading windows,display???


This sounds like a driver glitch. You will need an external monitor in order to fix it and check it to be sure it's not a malfunction with the video card. Connect the external monitor and start the machine, if everything works properly, ... Toshiba Tecra 9100 Notebook

Want to upgrade Video card


By the specs your machine doesn't support AGP so you'll have to go with a PCI card with S-Video out. ... E-Machines T3882 PC Desktop

Display failure after having lid closed while running


The solution to your problem is probably not the monitor, follow these steps:1. Connect and boot your computer with 2 different monitors.2. If it does'nt work with either of them the problem is from another computer component.Posibl ... Dell Inspiron 8500 Notebook

E-machine t6212 won't boot. I actually have two e-machines that are not sending a signal to the monitor. One is a t6212. It is booting up because I can shut it down using the windows key + up arrow + enter + right arrow + enter. I suspect the video card. I have an older PCI video card that is incompatible with xp. If I put that in the PCI slot will the bios send the video there? The other is a W3107. The hard drives spin, but the green light on the front stops flickering after a few sec


If you get only one BEEP at boot then the computer is working..\015\012\015\012Do you have a 2nd monitor to test with?\015\012\015\012if it BEEPS more then once...\015\012 pull out your mem chips and test,,\015\012 ... E-Machines T6212 PC Desktop

Monitor on HP Pavillion a656x---blew up the power supply--had an extra and installed it--when machine was turned back on--monitor displays "VIDEO CABLE CONNECTED?---what am I going to do----help!!!---


First thing I would do is try the monitor on another system to see if it's in the monitor or computer. Next would be to fire it up and see if you hear a beep from the motherboard. Most consumer pc's will come with a small speaker that sounds on sta ... PC Desktops

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

EMachine T6522 monitor says "no signal input" when turned on. tower switch light on and motor seems to be running. Nothing but above message on monitor. Checked both ends of cable and unplugged tower and plugged back in.


This could be an issue of a video card gone bad. I have experienced the same issue firsthand. This could also mean that no RAM is installed. If you have been using this computer previously, the second option is probably not even an option.\0 ... eMachines PC Desktops

Can Windows 7 be installed on X05? I get ACPI incompatible BIOS and have updated to last known one. Please help!


\015\012The only issue i can see is if your your ram has not been updated since leaving the factory, you will notice from the tables W7 requires a min of 1GIG and your machine leaves the factory with 256mb(dependant on country possible) so c ... Samsung X05 Notebook

How can i tell if my video card needs to be replaced?


Firstly, if you have lost your display, plug another known good monitor into the machine. If that monitor has a display then your own monitor is dead. If you get no display, you need to check if the machine is booting and running. Listen to it when y ... E-Machines eMachines Desktop PC

Dear.. my LCD is no power veiw,i turn on the lamp on LCD is yellow color then after 2 seconds the color will be change oren color..so how my email [email protected]


Hello there:This is usually not a good sign I will give you a couple of things to try out first ok (1) you may want to try the monitor on a seperate computer to see if it will work if not than the monitor needs to be repaired. ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

IBM Flat Panel Monitor problem - light colored shifting lines (like Bar Codes)


It sounds like it's a problem with the video card, as opposed to a problem with the monitor. If you have another machine, or a laptop, or a friend with a laptop you can find out - just plug it into the other machine, and if the problem goes away, it ... PC Desktops

How do I swap screens in Gateway 9300 Solo computer?


Before opening the laptops try easy things like swapping the memory. Also remove all cards underneath the panels you can get to (wifi. modem, etc) The machine will boot with just RAM inside it. This includes swapping batteries wich can cause failure. ... Gateway Solo 9300 Notebook

Monitors won't work with Gateway Desktop


The video adapter has probably gone to it's reward. Some Gateways have the adapter built onto the motherboard. Some have separate video cards plugged into the motherboard. Pop the case open and check to see if the connector for the monitor is a ... Gateway PC Desktops

Replaced power supply on T2240 emachine now cant get onboard video" or any video,also tried PCI video card with no results. Need video to see if machine can boot


Unplug the computer for at least one minute. Press power button for 4 secondS while the power cord is unplug. Plug it back listen for beeps short and long beeps count them and refer to bios codes. If nothing happens remove everything from the mothe ... Intel PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4119 seconds