Having problems with your E-Machines T2698 PC Desktop ?

My emachines T2698 won't start up. When I turn it

\015 When I start up my computer some screen pops up saying that the last start up was interupted and I have tried selecting all the options an it will only stay at a blank screen. I have restored my computer with the disks it came with several times. I want to know what I can do to fix this if anyone cam help.\015

Answers :

Using the restore discs might not have been so benign; nevertheless, perhaps your machine was off-put by a new piece of hardware (e.g. USB drive, external HD, webcam, etc.) you put on.
Unplug all but the basics; mouse, keyboard, speakers, monitor...and just reboot, selecting Boot Normally and hitting Enter if asked to choose.
For that matter make sure the monitor's plugged in well, clean out the machine with compressed air and a canister vacuum, check that the videocards etc. are well seated...and retry.

Failing that, give some proper detail as to what works, what's unpromising, and what's unexpected.
Repair Help & Product Troubleshooting for E-Machines T2698 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Computer wont turn on


Hi\015\012Bad news. your motherboard has been fried. You could try refashing the BIOS but I've got $10 dollars to your one that it wont work. Best bet - keep the tower, keep all of the running gear but a new motherboard and prosessor are in ord ... E-Machines eMachines Desktop PC

My Emachine wont stay turned on


This can b caused by a few different problems\015\0121) The machine can be over heating, maybe due to a bad or slow running CPU Fan.\015\0122) Bad power supply\015\0123) Can b software problem, maybe a Virus\015\012Try turning ... E-Machines eMachines Desktop PC

Emachine T5062 pc wont turn on, I get 5 beeps When the computer performs the ''Power on system test''. I could not remember what BIOS the computer had but I think It was AMI. The five beeps for AMI mean that its Processor failure: The CPU has failed this is the site i used to check the beeps http://kb.iu.edu/data/afzy.html I did vaccum the inside is the pc because it was really dusty and i removed the hatsiins for the CPU, I tried to reinser it but Im sure I put it back on right any suggestion


Make sure it is not getting really hot, also try cleaning all again and start putting them together step by step. make sure the dust didn't got in another part like RAM memories slots, and if you have a big problem with the processor the PC wouldn't ... E-Machines eMachines Desktop PC

I have a Emachine W3650 And it wont start up


Insert your windows cd and set computer to start from cd. When prompted to, hit a key to boot from CD. Let Windows start the install (relax it is not really installing anything) when it gets to the prompt, tell it you want to Repair an existing ... E-Machines eMachines Desktop PC

Emachine T6520 Wont Start Up


Check your num lock key status press it on and off if hum lock led is on and off when u pressing then your cpu working fine. so check connectiopn of vga cable cpu to monitor.Also some times display screeen resolution issue so when u power up pr ... E-Machines eMachines Desktop PC

Wont power up


Ok, the best actions here will be to purchase the correct power supply unit. you can order your unit online or , you can purchase it, via best by or office depot. this current supply unit may not have the correct ratings for your unit. if so, it will ... E-Machines eMachines Desktop PC

Computer wont go past start windows repairstart windows normally


Hit f8 numerous times at startup, and start in safe mode ... E-Machines eMachines Desktop PC

NTLDR is compressed


All you need to do is boot to the recovery console, and type the following commands, in order:cd \\attrib -c ntldrexit ... E-Machines eMachines Desktop PC

My emachines T2698 won't start up. When I turn it


Using the restore discs might not have been so benign; nevertheless, perhaps your machine was off-put by a new piece of hardware (e.g. USB drive, external HD, webcam, etc.) you put on.Unplug all but the basics; mouse, keyboard, speakers, monito ... E-Machines T2698 PC Desktop

Computer wont turn on


You might try turnin yer PC off & unplug. Then open the case & carefully remove the battery. Let sit for 5 min. Re-install the battery & put it back together. Plug in & turn on. IF you get a screen givin you the option "last known ... E-Machines eMachines Desktop PC

I have a Emachines w4682 and the monitor was showing no signal when I turned computer on. I hooked up a different monitor and that one worked so I re connected the original monitor and it worked I then got the computer working except that the USB ports quite working. Stupid me I shut the computer down and when I went to start it up it turned on and back off after less than a minute and now the computer wont turn on at all. Is it the motherboard, the power supply? Any help would be appreciated


Possible reasons are bad power switch, bad power supply, bad motherboard, bad memory , device card is not seated properly. Suggest replace power cord to see if still no power, also you may want to remove cover and make sure all your memory and device ... E-Machines eMachines Desktop PC

Start up can anyone help?


When you unplug your desktop without using the normal chut down procedure, the date of your windows OS are destroyed. In your case, the situation is same. What you can do:1. plug your desktop and while it is turning on press and ho ... E-Machines eMachines Desktop PC

I have an emachine w3107 had some display trouble then the screen went black now when i power on the system the fans start i can open the cd rom drive but that is it no bios screen no load creen the moniter sits with the blue light just flashing mockingly at me the hd wont start up


Question...do you have or can you get an OS/ CD...system designed to automatically re-install OS if put into CD Rom then when "door"closes\015\012imidiately turn off power...wait a few seconds then push power button.\015\012The system may ... E-Machines eMachines Desktop PC

Emachine Wont Load Windows


Delena \015\012problems like this is associated to RAM malfunctioning.\015\012\015\0121.your RAM might not be sitting properly on the RAM slot,you will need to resit the RAM by opening the system unit and remove the Ram and resit it ... E-Machines eMachines Desktop PC

We have an emachine that when you turn it on it trys to start up but it goes to the safe mode area but it wont start up even if you try to do it in safe mode


You rhard drive is eaither bad or it has bad sectors on thing to try is to reboot t he computer with your restore disk and if this does not work you wil need to try a different hard drive ... PC Desktops

Emachine Wont Load Windows


... E-Machines M6805 Notebook

When i turn on my pc the desktop dont show


Go to Start > Programs > Accessories > System Tools > System Restore.Follow the prompts and select a bold date prior to when your problem first appeared. The system will reboot and with luck, the scanner will work. ... E-Machines eMachines Desktop PC

Emachine 4048 is so slow


Well if your computer is slow, it might be you have lot's of viruses there which can cause it too slow, it might be slow for any reason i will write some common steps here jsut try thos1. Delete all the files in %tmp%, temp and prefetch ... E-Machines eMachines Desktop PC

The start up screen wont come up! - E-Machines eMachines Desktop PC


As soon as you turn on your system....try pressing F8...try to turn on your system in safe mode ... E-Machines eMachines Desktop PC

Noisy fan after a few minutes start up


Yeah. i had this problem too. the fan is noisy because it is garbage. it needs to be replaced if you want to get rid of the noice. you moving the laptop wen the noise first started is just coincidence. the heatsink is fine, but the fan itself is poor ... Acer Aspire 5100-5033 Notebook

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

I have a EMachine T6534 which won't start. I shut


Most computer repair shops have a tester that they can hook up to your power supply. You can also purchase one for yourself, they usually run $25-50, it may be viable to purchase one if the shop will charge that much to test. ... PC Desktops

No start up , button lites up - cd-rom wont open , noticed no fans on for 3d card or big one on mother board


If the cpu/heatsink fan isn't turning then most pc's will shut down to avoid further damage to cpu & board. I would first replace the fan if it's the one over your cpu. Try replacing power supply. If your board has the 4 ... E-Machines eMachines Desktop PC

My Toshiba Terca A8 wont Start


I assume that by now the battery has discharged past the point of being a useless diagnostic tool. Either the charger failed or the laptop failed. Have a reputable repair person put in a freshly charged battery to see it the machine will run off ba ... Toshiba Tecra A8-S8514 Notebook

No wireless adapter detected ad wireless button ot turning on


First u need to make sure ur adapter is installed correctly. \015\0121. Click on Start-->Run-->Type in "devmgmt.msc"\015\012which will open device manager.\015\012Under device manager , u should find network adapters, make sur ... Acer Aspire 5520-5579 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6144 seconds