Having problems with your E-Machines eMonster 550 PC Desktop ?

Monitor screen while booting says out of range then turns blue.


Answers :

While booting into the Operating system try pressing F8. It will take you to the os menu and select VGA loging in mode in that. Later after entering the operating system reduce your monitor resolution say 800 * 600 it should fix the problem.
Repair Help & Product Troubleshooting for E-Machines eMonster 550 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

Monitor not displaying


Sounds like your video adapter settings have been wedged. If you are running Windows XP Service Pack 2, you can use the following steps.\015\012\015\0121) Boot the laptop into safe mode. Boot into safe mode with networking support if possible. This c ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Possibly Video Card problem?


Mikolan,That is so crazy.You say you previously was able to see the POST screen and now you can't?You say you switched monitors and card outputs to no avail? Is the card an ATI with an aux Molex power connector?Is the pu ... PC Desktops

Signal out of range


1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

My Fujistu Amilo laptop screen is blank, I can see nothing though I laptop seems to have booted and using a combination of tab and enter I have heard the windows login dingle. How can I work out if it's the screen or the backlight and how can I make it use the second monitor I have plugged in.


Hello there,If the backlight is out, the screen image will still show up but there is no light to shine through it so you can normally see it.The test that I've used is to get into a bright area(outdoors on a sunny day) and angle the scre ... Fujitsu Siemens PC Laptops

My monitor says no signal


A friend gave me this computer because he got another and was tired of messing with this one ... he says he turned it off one night and it would never boot back up , sso i had a new 160 gig hd which is the same that was in it and i installed it think ... E-Machines eMachines Monitor E15T4

Blue box I have been given a flatscreen monitor which on installation has a blue box in the middle of the screen saying "Input signal out of range". How do i remove this?


You need to set the screen resolution or refresh rate of your windows. I am assuming you have XP.\015\012PLEASE READ THE WHOLE OF THIS FIRST, BECAUSE YOU MAY WISH TO DO THE BIT AT THE BOTTOM FIRST, LABELLED 'IF ALL ELSE FAILS'\015\012 ... Relisys TL 766 Monitor

My monitor goes to sleep mode at startup & can't access safe mode


Turn the computer off, open the case and remove the RAM. Does the computer beep when you turn it on with no RAM? If not, your motherboard is dead. If your computer beeps, turn it off again and try putting one stick of RAM in. If the co ... E-Machines eMachines Desktop PC

When computer is booting up, the monitor goes out before it gets all the way up and says the Horizontal, and Vertical is out of range. The menu says that the freq. is now Hor. freq. 91.1 KHZ, and Vert. Freq. is 81 HZ. I cannot do anything with the cursor for turning the computer off or trying to try to fix the problem. My son gave me this monitor today, and this is what happened when I connected it to my computer. It is a KDS 17'' LCD color monitor. Factory ID: GS Power source is DC 12.0 DC 3.5


Hello,Turn the monitor on without turning computer on. Use the OSD (On Screen Display to lower the refresh frequencies. On the monitor look for a Setup button. The arrows allow you to scroll through the options. Do not forget to save settings. ... Computer Monitors

Computer screen blank


Your operating systems is using a resolution out of your monitors capable range. Hit f8 during boot and select VGA mode. Once in change the resolution. OR Your operating system is using a different output. Once in VGA mode check the dis ... E-Machines eMachines Desktop PC

Monitor says no signal


This could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to ... Northgate (STAX2517C2) PC Desktop

Monitor says out of range


1. Turn off the computer.2. Turn on the computer.3. As soon as it starts up press and tap the F8 key. 3a. If a "boot menu" appears, select hard drive, press enter, and immediately press the F8 key again.4. The safe mo ... AOpen Black 17inch LCD, 1028x1024, 16ms, H: +/- 80 V: +65 Monitor

Signal out of range


It's not the monitor, it's the graphics driver. Boot into Safe Mode (F6 at startup before it starts booting to Windows) and have the driver handy for your video card. Install the newest driver for that card, reboot, and you should be good to go. ... Kogi l7eh-ta ko 17" Flat Panel LCD Monitor

Cannot start up the laptop


Hi there.That really quick flash of a blue screen is the blue screen of death and there is a possibility that the error could be memory related.What you have to do is remove and clean the system memory and the slots the memory goes into. ... Toshiba Satellite A105-S171 Notebook

Hello I have an acer aspire 5535 and it keeps


The complete solution to this fault (Acer 5535 keeps crashing under vista) is to use Windows XP instead of Vista. Set up a Dual Boot so you can CHOOSE to load XP or Vista each time you turn on the laptop. I've put XP on my 5535 and it's SO much faste ... PC Laptops

INPUT SIGNAL OUT OF RANGE


Some how your screen resolution has changed above or below what your monitor can display. you need to boot your computer using another monitor that can work with the resolution your computer has switched to(i used a spare crt monitor when it happened ... Relisys TL775 17" LCD Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

When I switch my windows XP Home Edition on instead of the usual gradual build up to Desk Top & icon programmes etc. I get the usual large black screen but instead of the windows motif appearing I get a deep blue oblong about 6"x1" with a message ("OUT OF RANGE") (H:27.8K V: 61.9) The H27. 8K Flashing Red This happens every time when switching on and the only means of closing down is to turn the power off. I have a Lap Top connectd to the Desk Top


The results you are seeing are actually from the monitor itself. It's telling you the vertical and horizontal sync frequencies to help you troubleshoot your lack of display.\015\012\015\012You'd usually see this happen when someone has se ... Packard Bell PC Desktops

Acer will not boot up even with it being plugged in, no lights, noise, nothing


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5100 Notebook

Dell latitude d500 had a power socket problem, but now resolved pc will not boot-up, drive spins-up, then nothing, completely dead display i think most likely scenario is mobo is fried, but open to suggestions how tio get this working again


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Dell Latitude D500 Notebook

Monitor screen while booting says out of range then turns blue.


While booting into the Operating system try pressing F8. It will take you to the os menu and select VGA loging in mode in that. Later after entering the operating system reduce your monitor resolution say 800 * 600 it should fix the problem. ... E-Machines eMonster 550 PC Desktop

I have a desktop pc HP Pavillion a6600f. When i power on the computer i get a blank screen. The monitor says no signal going to sleep. So far I have changed the graphics card, Switched the ram to different slots, and removed the cmos cell. I am open to any more suggestions you have for me. monitor is good i have it hooked up to another computer in front of me please help! operating system windows vista home premium 64. installed update then shut down computer when tried to restart nothing


Perry7575\015\012\015\012Most likely the problem is with Windows its self. I am not sure what is exacting happening but I have been seeing alot of this lately. Something is causing something with the video to get out of wack. I have fi ... HP Pavilion a6600f Desktop PC

Red Dot and OUT OF RANGE problem


You might be able to take back the monitor since you just bought it, but manufacturers generally have a specified number of bad pixels for which they deem the panel to be functioning acceptably and they will only replace it if the number of bad pixel ... LG Flatron L1710S 17" LCD Monitor

Toshiba satellite pro 600 won't boot up


If you get this error in a black screen before windows xp can boot up....\015\012CLIENT MAC ADDR: xxxxxxx GUID: xxxxxxxxxxPXE-E53: no boot filename recivedPXE-MOF: exiting intel PXE Rom\015\012Your network card's settings in b ... Toshiba Satellite Pro 6000 Notebook

Computer turns on but does not boot windows, no bios screen


My neighbors e machines goes to the start windows normally screen, and then pops up this bright blue screen, but you can't read anything cause its like in a nanosecond gone, then says no signal, then to the bios screen and keeps repeating and repeati ... Dell Dimension 2400 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8873 seconds