Having problems with your E-Machines eMachines T3830 PC Desktop ?

Building a new PC, cannot get LCD to work

\015 I am building a new PC. Details as follows.MOBO - Gigabyte EP45-DS3HDD - 1 TB SATA 7200RAM - Kingmax 1024MB PC2-6400 800 MHz DDR2 - CL5 Patriot 2048MB PC2-6400 800 MHz DDR2 - CL5CPU - Intel DC E5200/2.5GHz/2MB cache/800FSB/LGA775case - 600 watt MDI ATXMonitor - LCD View Sonic 20'I have physically built the computer, but I cannot get the LCD to receive signal. I tried the monitor on a known working PC and got a signal, so the monitor is not the problem. I disconnected all components and refitted (without any luck). I read that sometimes the MOBO can short out on the case, so I tried running the system out of the case (without any luck). I have stripped the PC back to bare minimum, HDD, GPU and power (and still no luck).I cannot get into the bios to troubleshoot settings.There is no on-board graphics to switch to.All fans are running, the HDD is spinning up okay.\015

Answers :

You MUST get into bios to set "initalise display first"selection.
\015\012try alternatly pressing delete,or f1 keys toget into bios.
\015\012one of the two will get you "in"
\015\012
\015\012then follow instructions at bottom of screen to navigate.
\015\012
\015\012if you have a pci or agp grafix card,select it accordingly in "ini display"settings.
\015\012
\015\012and if you still dont get a screen,set jumper on mo-board to clear c-mos.
\015\012
\015\012and if you STILL dont get display(happened to me with a dell monitor(lcd),the monitor wont work with the computer.
\015\012--try another monitor!
\015\012
\015\012most anything will display in 256 colors via the op-sys till you install the grafix card drivers and utility.
\015\012
\015\012good luck!
What GPU video card are you using? It is seated well?. If I have the correct MB specks. have you tried the PCIe VIdeo card in the other slot?\015\012  Another thought. Their is a note on your particular  mother board to check with the compatable CPU chart. \015\012
\015\012http://www.gigabyte.com.tw/Support/Motherboard/Manual_Model.aspx?ProductID=2843
Repair Help & Product Troubleshooting for E-Machines eMachines T3830 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Building a new PC, cannot get LCD to work


You MUST get into bios to set "initalise display first"selection.\015\012try alternatly pressing delete,or f1 keys toget into bios.\015\012one of the two will get you "in"\015\012\015\012then follow instructions at bottom of s ... E-Machines eMachines T3830 PC Desktop

Whilst in use went completly dead canot resart


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Pavilion dv6000z Notebook

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

Dell latitude d500 had a power socket problem, but now resolved pc will not boot-up, drive spins-up, then nothing, completely dead display i think most likely scenario is mobo is fried, but open to suggestions how tio get this working again


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Dell Latitude D500 Notebook

My on button just blinks on and off but when I push it to turn it on..nothing happens..its like it isnt getting any connection


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5520-5908 Notebook

My acer travel mate 5710 just blipped and closed down. NOw will not even switch on. any advice how to fix? The green power light does show for one half second when I press the button but does not function to 'on' mode.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... PC Laptops

My Toshiba Satellite 2415-S205 is dead as door nail, no lights, etc. I checked power supply, power jack and connection on board, all is OK. Now what, send into the shop for repair? Ted


Here are some suggestions I compiled, some you have done, thought I would throw it out there for you...\015\012\015\012 ... Toshiba Satellite 2415-S205 Notebook

My loptop is an Averatec 7100. How can I test the motherboard? I took it to a computer repair shop and they said is the motherboard, I want to know how can I test it on my own.


This is more of a system diagnosis that an actual motherboard testing procedure, but since all components attach to the motherboard in one way or another it could count as a prcess of elimination......\015\012\015\012 ... PC Desktops

No' it's not powering up at all now, can you help' after changinng ac-adapter & battery


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... PC Laptops

The screen is not going on all that shows up is a black screen with a white slash mark flasing


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Dell Inspiron 2200 Notebook

My hp compaq nc6400 doesn't turn on. the green


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... HP Compaq nc6400 Notebook

I have power out of adapter but laptop is completely dead; no lights come on at all.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Toshiba Satellite A45-S150 Notebook

Acer will not boot up even with it being plugged in, no lights, noise, nothing


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 5100 Notebook

1. My ideapad Y430 easy cam doesnot working after i reinstall windows vista ultimate. Not i cant use it for my password. 2. I also try to partition it into four but it doesnot support i can have only two partition. 3. i cant install Windows XP3 in this machin. plese halp me.


This is all I can offer in your situation.....one option is to..use the...Novo buttonThis button functions as a reset button; use with caution. Press the1. Novo button to enter the main interface of OneKey Recovery while thepo ... Lenovo 3000 Y410 Notebook

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Lines on LCD


Once you see lines on the lcd that defitinely means the lcd is bad. As far as the board to the lcd, that would be behind it but with all the delicate tiny IC's on it, its would be near to impossible to troubleshoot it and start replacing components ... Toshiba Portege M100 Notebook

Resolution issues with Acer LCD al 2216w


Possibly this will help. I have installed two1680x1050 LCD screens this past year: your 2216W model on a new PC, and a similar model from another maker on my wife's older HP PC.\015\012\015\012Mine worked at the native resolution, my wif ... Acer AL2216W LCD Monitor

Operating System Not Found, Can't Use CD Drive


I'm afraid you have a hard disk problem, it has probably failed.If you have entered your BIOS and the hard disk has been set to auto (detect) and when you boot up and you press F1 to continue and get a message "Operating System not found" then ... PC Laptops

DV8309 power up problem: blue lights on for few seconds then off


The inverter inside the lcd panel is most likely your problem. Try removing the whole lcd screen from the laptop if you are capable and run it with the external screen to confirm. leave the lcd switch off (this lcd switch above the power button turns ... HP PC Laptops

Screen still goes black and gets worse when adaptor is plugged in


That sounds like a hardware issue, not driver related at all. You could try doing a system restore to when it did work, but that probably won't help.\015\012I'd suggest opening it up and reseating the plugs to the lcd panel, but anything more t ... Dell Inspiron 6400 Notebook

CHILD DROPPED IT NO SCREEN BUT WORKING


You con get a new LCD monitor using this informationhttp://www.acerweb.co.uk/aspire1520.htmor to enable an external monitor you will have to switch it on by right-clicking on the desktop( i dunno how much of ... Acer Aspire 5720-6661 Notebook PC

WET LAPTOP I left my laptop near the window and went out partying. It rained that night and my laptop got wet. My laptop was in shut-down mode but was connected to the AC supply. When I reached home, I wiped it with a towel and tried to turn it on. The power light would come on but the system wouldn;t turn on. I left it to dry the entire night. Next morning I kept it under the sunlight for a couple of hours. Again tried turning on. This time it would turn on but keybord wouldn't work. So I left


Multicolored vertical bands means that the contacts on LCD ribbon cables are still shorting because of liquid or oxide building in consequence of liquid damage. Also keyboard is probably not working for same reason. ... Samsung R610-64G Laptop

Vertical lines on my lcd laptop screen


It's the connector problems.If you know what to do, I can guide you:First, remove the screw all over the LCD case, then you can see the connector, and flexible cables.Second, remove the keyboard unit(by removing all screw on t ... Dell Inspiron 6400 Notebook

I cannot open my zoombrowser 6.1 software.


\015\012 Why does Canon ZoomBrowser EX always crash on Vista?\015\012By ... Canon ES-E1 EOS Link (4593a006) for PC

When the Sony Vaio laptop is powered up there are missing(dark)


Connect an external monitor to the video connector on the laptop and bootup the laptop. If you don't get an image on the external monitor then press the blue Fn key plus the one of the function keys with the screen/monitor symbol, (this toggles the d ... Sony VAIO PCG-K23 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8533 seconds