Having problems with your E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop ?

VGA/MOTHERBOARD I have a problem with booting my computer. When booting up everything appears to run H/D fans ect but I have no VGA signal. It supports the MSI PM8M3 VH M/Board. I have done most of the usual checks like taking out the memory and replacing it and unplugging just about everything and reconnecting it but still no VGA signal. It has on board graphics, could this be the problem... thanks


Answers :

Yep. try disable on board card (if there is a setting) and use external video card.
Repair Help & Product Troubleshooting for E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

VGA/MOTHERBOARD I have a problem with booting my computer. When booting up everything appears to run H/D fans ect but I have no VGA signal. It supports the MSI PM8M3 VH M/Board. I have done most of the usual checks like taking out the memory and replacing it and unplugging just about everything and reconnecting it but still no VGA signal. It has on board graphics, could this be the problem... thanks I have a problem with booting my computer. When booting up everything appears to run H/D fans ec


Try hooking up to the onboard card and check the video settings in yor bios. Usually press f2 to get there on bootup. Select VGA graphics. ... IBM NetVista PC Desktop

VGA/MOTHERBOARD I have a problem with booting my computer. When booting up everything appears to run H/D fans ect but I have no VGA signal. It supports the MSI PM8M3 VH M/Board. I have done most of the usual checks like taking out the memory and replacing it and unplugging just about everything and reconnecting it but still no VGA signal. It has on board graphics, could this be the problem... thanks


Yep. try disable on board card (if there is a setting) and use external video card. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Steps tp instal Nvidia 6200 AGP card


Once you have your computer unplugged and taken apart to the point where you can access the AGP slot, take off the small metal cover on the back of your computer (usually fixed with a single screw). Gently place the Nvidia graphics card into the slot ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

Ibm netvista x41 wont power up


Measuring 12v at the psu is not enough.\015\012the psu have several voltage outputs ranging from 12volts to 3.3 volts and maybe even 2.2 volts..\015\012firstly, check all onboard USB ports, a bent or shorted pin in a USB port will prevent the psu fr ... IBM NetVista X41 PC Desktop

Dell dimension 2400 will not boot. Diag lights A & B amber.


First of all dnt take tention, \015\012firstly remove ur all RAMs then reboot ur system. after that flash the motherboard cell. \015\012after that reboot ur system, if yous system have same problem then plug out all hadware of ur system e ... Dell Dimension 2400 PC Desktop

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

Sony VAIO VGN-FZ410E does not boot up. On power the laptop seems to go through normal sequence but the display remain white. The unit stays on with no display and reboots after several minutes. CTRL-Alt-Del sequence causes the laptop to attempt to re-boot but with no display. Putting a bootable cd in the drive shows a similar behaviou ie. nod display (screen reamins white). Any idea what causing the problem?


Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... Sony VAIO VGN-FZ410E/B Notebook

DELL INSPIRON 1501 won't BOOT...and LEDs flashing


Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... Dell InspironTM 1501 Notebook

Will not boot up


Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... PC Laptops

Won't boot up


Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... HP PC Laptops

I have a Toshiba Tecra A8 and it will not boot up the only thing it does is display a J_. Can any on help? Please


Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... Toshiba Tecra M2V-S330 Notebook

My power supply failed. Now after replacing it


Unfortunetly the power supply can be a symptom not the actual cause.\015\012\015\012Do you get any beeps or other signs that it is actually booting up? The older AMD's are quite sensative to both heat and electrical problems. You may have ... AOpen PC Desktops

Blue screen after lcd replacement


Hi,Note - I am taking into consideration that all the connections are tight. Any loose connection might result in Blue Glowing Screen.Most of the new TV's display a blue screen when there's no signal for it to lock on.Try unpl ... Dell Inspiron 6400 Notebook

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

When i switch on my laptop and starting windows on logon screen my laptop keyboard & mouse does't work after 20 minutes it goes ok automatically i format hdd and reinstall windows but the problem is same


I would boot up to safemode (assuming that works) and type MSCONFIG in the run box. Check selective startup, then go to the selective start up tab and uncheck everything.\015\012\015\012Click apply or ok. \015\012\015\012Res ... Acer Aspire AX1200-BE5600A 22' wide-screen TFT LCD Athlon 64 X2 5600+ 3GB DDR2 320GB NVIDIA GeForce ... PC Desktop

My VX924 Green Led Blinks until fully booted to windows


Ok if what im understanding is you tried on another computer and it worked great \015\012the monitor is not your problem the problem lies with your video card\015\012the video card could be outdated\015\012the video card could need ... ViewSonic VX924 19" LCD Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

NO POWER GT4010 GATEWAY COMPUTER. THE POWER BUTTON WOULD NOT START THE COMP. REPLACED THE POWER SUPPLY AND STILL NO POWER. BUT MY INTERNET IS CONNETED THRU THIS COMP. AND IT STILL WORKS.


If you have changed the power unit and the computer is still not powering up, then it is quite likely there is a motherboard fault - probably in the power management circuitry, which expects the power_good signal from the power unit at a precise mome ... Gateway GT4010 (RBGT4010) PC Desktop

Reloading windows xp


Replacement Drive? If you are talking about a Hard Drive the answer is: You can buy any hard drive as long as it is the same type from any computer store. Take your Hard Drive to the store and tell the sales person that you want another hard drive ... Dell Dimension 4600 PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Acer aspire e500, it will not boot up. one led work.(middle "CD")


Hello,\015\012\015\012Does it display the boot screen?\015\012\015\012Do you hear a buzzer or a beeper go off inside?\015\012\015\012Sometimes a boot can be stopped by the ram, this is generally made visable by a b ... E-Machines T1360 PC Desktop

I am unable to open cafe world - Dell Dimension 2400 PC Desktop


You've done all the right things - likely the keyboard controller is\015\012shot. If you can live with not turning off your computer you could\015\012probably get years more out of this box ... assuming you can get a usb\015\012mouse/keyboard running ... Dell Dimension 2400 PC Desktop

Screen will not display


Hi,Have you ensured that your display card driver AND correct monitor driver is installed. This is to make sure that your display card only generates signals that your Acer monitor is capable of handling. If you do not have the driver CD for yo ... Acer H233H bmid Monitor

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8589 seconds