Having problems with your E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop ?

I have an emachine T2984 that won't boot. No noise of any kind. I had another emachine T2625 that was working. I took the power supply out of the T2984 (that wouldn't boot) and put it in the T2625 and it worked. Can I assume that rules out a faulty power supply? However, now when I put the original power supply back in the T2625, it now does not boot up. The power supply seems to work, but I get a "no signal" message on the monitor. Any suggestions?


Answers :

Power supply sounds fine. If the pc won't power up it could be your motherboard. If the pc is powering up and you get a 'no signal' on your monitor it could be your gpu.
Repair Help & Product Troubleshooting for E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have an emachine T2984 that won't boot. No noise of any kind. I had another emachine T2625 that was working. I took the power supply out of the T2984 (that wouldn't boot) and put it in the T2625 and it worked. Can I assume that rules out a faulty power supply? However, now when I put the original power supply back in the T2625, it now does not boot up. The power supply seems to work, but I get a "no signal" message on the monitor. Any suggestions?


Power supply sounds fine. If the pc won't power up it could be your motherboard. If the pc is powering up and you get a 'no signal' on your monitor it could be your gpu. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

2 emachines won't boot


Are you attaching them properly\015\012if so then it is something other then power supply\015\012something has caused both power supplies to blow\015\012have you installed anything in the first emachine you talk about ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop

Monitor reads: PC entering power saving mode then shuts off;PC on


First do not take the hard drive out and put it in another computer. It is configured to run in the computer it's in.\015\012\015\012Next, you probably did have a power surge either from your power supply or the power in your home. It s ... HP Pavilion a810n (PP164AA) PC Desktop

Can not power up


To my personal experience eMachine MB's dies a slow aggravating death. I have had 2 that went janky and would take about 15 power up tries to boot. Probably the situation you are in now.Did the power supply you had go bad? I seem to recal ... E-Machines eMachines Desktop PC

Bad power supply, installed new one, get green light on mother board; but doesn't boot up. Bad start up button?


Yes, it is my belief that it is the Power On button. To test this, there is a simple solution. I however, would like to caution you at this point.You will have the power supply plugged in. There will be a small spark. I wouldn't advise how to t ... PC Desktops

T2682 emachine running fine video lite went yellow & HD also


The first thing you should do is remove the video card and try to boot\015\012the PC using the onboard video (video on the Motherboard) and see if\015\012that solves the problem. If it does, try putting the video card back\015\012in in a DIFFERENT P ... E-Machines T2682 PC Desktop

Replaced power supply on T2240 emachine now cant get onboard video" or any video,also tried PCI video card with no results. Need video to see if machine can boot


Unplug the computer for at least one minute. Press power button for 4 secondS while the power cord is unplug. Plug it back listen for beeps short and long beeps count them and refer to bios codes. If nothing happens remove everything from the mothe ... Intel PC Desktops

Replaced dead power supply computer still dead


Hi\015\012most power supplys are protected against faults when they are connected to damaged equipment\015\012so it possibly just protecting its self\015\012\015\012disconnect everything from the PSU except your MB\015\0 ... E-Machines D2046 PC Desktop

Emachine t2642 power supply - PC Desktops


Apparently this model has a bad motherboard, which manifests as a power warning and eventually a refusal to boot up. You can replace the power supply (as far as I know, any generic one 250-watt or better will work) but it's unlikely to help. You can ... PC Desktops

On working on my mother's emachine W3410. Her


Test the ram and the cpu, if its not one of those, then it IS the motherboard. ... E-Machines W3410 PC Desktop

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

EMachine T3958 Won't start - Please help


The green LED indicates that the standby voltage is present which is what provides the power so the front button can tell the unit to turn on fully.\015\012At that point, there are 3 possibilities; the power supply has a fault and won't turn on ... E-Machines eMachines Desktop PC

THE SCREEN SMEARS NAD SHUTS DOWN


Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

Gateway 831gm not booting. Fans come on but no boot process.


2 questions:\015\012When you say new motherboard do you mean an actual new motherboard or new to that machine, but came from another used model?\015\012When you say you tested the power supply do you mean with a voltmeter/ammeter or put i ... Gateway 831GM PC Desktop

Memory Upgrade and Computer will not boot


Would a memory upgrade Zap the power supply? ... E-Machines eMachines Desktop PC

D600 laptop boot problem


The D600 is plagued with power up problems for 2 reasons. First the connector on the motherboard to the power button is very sloppy and after awile it breaks contact. If you put pressure under the docking port area and press the power button it may s ... Dell PC Laptops

Friend has a Emachine T1862 that won't start


May be the CPU fan is going bad. I hope it is that simple. ... E-Machines PC Desktops

Computer won't boot or shut off


Yep--you put it together incorrectly.I don't know why you took it apart. Don't do that again. Just open the case and blow it out--especially the power supply. There is nothing to be gained by taking all the stuff out of it.I woul ... E-Machines eMachines Desktop PC

EMachines T6528 desktop will not boot up


The power supply fan runs from either 5V or 12 so that only tells you that the voltage for fan operation is present.\015\012\015\012If you don't have a multimeter already, I would highly advise that you buy one.\015\012They are available for &l ... E-Machines eMachines Desktop PC

I think motherboard is shot


Hello,\015\012\015\012You may be able to start the system restore from the repair console if you have your operating system boot CD by following the steps ... E-Machines eMachines Desktop PC

Not turning on, has power and everything


Do any of the fans spin at all, as though it's attempting to boot up? If not, then double check your power supply to see if it has a switch on it and if it does then make sure it's switched into the ON position. If so, then I would recheck the power ... eMachines T3604 PC Desktop

Hello, I have a Gateway model GT5662, stock setup - Will not boot


Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

EMachine will not turn on.


Sounds like the power supply is faulty. Power supplies are very dangerous to try and repair, even for qualified technicians. I would also suggest not trying to plug it in or turn it on until the new power supply is in place. Faulty power supplies ... E-Machines eMachines Desktop PC

Dell Precision 380 won't boot


I had a similar situation with a work computer; the power supply always tested good. A wiser and more experienced computer guru ordered a new power supply. He gave it to me told me to install it, I did and was laughing the whole time. Well it in fact ... Dell Precision 380 P4 Dual Core 3 GHz (99382) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7236 seconds