Having problems with your E-Machines eMachines Monitor E15T4 ?

E machine monitor turns itself off and on

\015 I will hear a click and the monitor will turn off. And then after a little bit, it'll click and turn back on. It doesn't stay on for more than a minute. This just started happening and I don't know where to begin checking for a solution.\015

Answers :

The same thing happened to me today. I was just sitting in my room then i hear a click and the cpu is on it stays on for a while then cuts off. It then cuts on and off with few seconds in between. It then stays in that way cutting and off for about a minite or two and then cuts off completely. A few minutes later it starts again. Also in the time it its off it will not turn on by pressing the power button. Sometimes it completly boots up by itself and then shuts itself down. If I shut it down manually while its on it'll turn itself on immeditaly after. What's going on! Will the warranty cover it? Do I need a new computer?
Repair Help & Product Troubleshooting for E-Machines eMachines Monitor E15T4

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Rebooting .. no effect on the monitor black blinking yellow light


Hi.This is a hardware problem. If the machine seems to startup normally (apart from the monitor), then it is commonly caused by the video card coming loose. Turn it on, wait about 2 minutes until the drive activity dies down, then press the pow ... Gateway PC Desktops

I do not my computers oprated - PC Desktops


Hi,\015\012 You have easily operate your computer. The steps given below....\015\012\015\012Materials Needed: \015\012- CPU- keyboard- monitor- mouse- speakers- printer- Operating S ... PC Desktops

My monitor says no signal


A friend gave me this computer because he got another and was tired of messing with this one ... he says he turned it off one night and it would never boot back up , sso i had a new 160 gig hd which is the same that was in it and i installed it think ... E-Machines eMachines Monitor E15T4

AG Neovo X-17a


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Neovo AG 17" LCD Monitor

How can i tell if my video card needs to be replaced?


Firstly, if you have lost your display, plug another known good monitor into the machine. If that monitor has a display then your own monitor is dead. If you get no display, you need to check if the machine is booting and running. Listen to it when y ... E-Machines eMachines Desktop PC

Moniter My moniter will not stay on and when I turn the computer back on, it says AVG and has the picture of the AVG cord. I assumed that the AVG cord had a short in it or something but when I bought a new one, it still did not work.


First please check whether the Monitor powering ON or notthe see the colour of light of the monitor i.e, its green or orange or not glowing next see that all the lights showing but constantly flickering or else just see u r VGA or DVI Cable whi ... E-Machines eMachines Desktop PC

E-Machine T1100 I am trying to access the BIOS settings on an E-Machine T1100. I've tried tapping on all the "F" buttons during startup. I've tried pressing "Ctrl+Alt+Insert", "Ctrl+Alt+PageUp", "Ctrl+Alt+PageDown", Ctrl+Alt+Home", "Ctrl+Alt+End" and "Esc" with no luck. All I see at startup is an E-Machine logo. How the heck do I access the BIOS settings?


Press "DEL" when you see the white emachine screen.\015\012\015\012However, the amount of time it takes for the monitor to come out of sleep mode is quite lengthly, so it is easy to miss seeing the white screen altogether.\015\012 ... E-Machines eMachines Desktop PC

I cant even turn it off, it doesnt connect to the monitor it says its on power safe mode. When I plug it in, the fan runs, the machine runs and turns on but nothing out of it, the mouse and keyboard dont work with it


Hello there, sorry to hear about your problems with this machine.The first thing you will want to do it shut it all the way down (hold the power button in for 10 seconds or so).Once it has been shut down go ahead and unplug EV ... PC Desktops

Monitor Buzz on start -up


Try a different monitor or this monitor on a different computer. If it makes same noise on different machine or new monitor makes no noise on your machine you need a new one. ... Computer Monitors

-computer has gone blank


This could be anything from the monitor to bad ram or other items...i.e. software. I can't tell you what to replace but I can tell you what to check....in probable logical sequence. First, check your connections....meaning unplug and plug in again. ... Rosewill R900J 19" Flat Panel LCD Monitor

When I turn on computer, the blue light comes on and the computer makes sounds as if it is starting and the monitor light is yellow. If I turn the monitor off and then back on, the screen says something like 'NO INPUT". aNY SUGGESTIONS


No input usually indicates the machine is having trouble getting a video signal from the monitor. Check and make sure the monitor cable is connected properly. If you have another monitor also test the machine with another monitor. ... E-Machines eMachines Desktop PC

Monitor on HP Pavillion a656x---blew up the power supply--had an extra and installed it--when machine was turned back on--monitor displays "VIDEO CABLE CONNECTED?---what am I going to do----help!!!---


First thing I would do is try the monitor on another system to see if it's in the monitor or computer. Next would be to fire it up and see if you hear a beep from the motherboard. Most consumer pc's will come with a small speaker that sounds on sta ... PC Desktops

I have a emachines t6410 pc and a 15 inch led monitor that came with it. It is apx. 5 yrs old. Am having issue with monitor turning on. If computer sits for a long period (a few hours) without being used the monitor seems to hibernate even though I do not have this option checked. Trying to get it back on is an experiance! I keep fiddlng with the power cord, the cord from pc to monitor, pushing button off n on and finally the blue indicator light will start flashing and eventually the monitor tu


There are two forces involved, one is the monitor itself and the other is a display property. To turn back on press space bar, and that will reactivate.\015\012\015\012Your description sounds like your machine may be sleeping or hibernati ... E-Machines eMachines Desktop PC

Emonster 600 won't boot up


You should not loose any information seeing that all information is held on your hard drive. As for changing out the processor, it seems pretty intimidating but is rather simple. When you have the side of the computer removed and can see into th ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

LOST POWER ON MY COMPUTER.


Here is a link to a motherboard that is on sale at Ebay:\012\012http://www.ebay.com/i ... E-Machines T2200 PC Desktop

Please can anyone help me i have recently upgraded my monitor from a xerox 19'' to a samsung 23'' syncmaster now with the monitor in standby i turn on my acer t180 and the green light in the on button dosent light up an the monitor wont detect a signal if i turn off both pc and monitor then turn the pc and then the monitor everything works fine in this pc i am running a xfx 9500 gt graphics card and have the latest drivers for the card and monitor so why should this be. i know its only a little


I assume you are running windows. First off you need to boot into safe mode by pressing F5 repeatedly as soon as you start your computer. Select the option for safe mode. Once you are in then you need to go to the device manager. Click on the run opt ... PC Desktops

Unable to print using samsung print on Windows XP


To resolve this issue, follow these steps: 1. If you do not have a Lexmark printer installed, go to step 4. If you do have a Lexmark printer installed, go to step 2. 2. If the Lexmark print service is installed on your computer, turn off the Le ... Samsung PC Laptops

Eee pc won't turn on (I think have already posted this,not sure)


Sounds like a classic case of hardware failure!!!!!!! possibly your motherboard, start by removing the battery, hard drive and optical drive.disconnect the laptop monitor and connect the laptop to an external monitor.remove the memory mod ... ASUS Eee 4G Notebook

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

My monitor will not work with my compaq computer when i plug it in it flashes up then goes black. how do i fix this as i can't see any settings through the monitor


1. Press the power button on the monitor to make sure the monitor is ON make sure it's plugged into the computer correctly\015\012\015\012\015\0122. Turn off the computer for 10 seconds , and reboot the machine\015\012\0 ... PC Desktops

NEED ASSISTANCE w/ DELL PC


When you first turn on the system, listen closely for any beeps. If you hear any try to remember or write down the pattern of beeps. Then go to Dell's site and find the manual for your model and look up the BIOS or CMOS error codes. This will indi ... PC Desktops

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank


The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

Monitor Turns Black


This is nothing to do with CPU but maybe your GPU (Video card) It sounds like you built the machine your self & from what you've said it could be an earthing issue if your screen turns off when you tighten the screws or it might mean that your vi ... PC Desktops

Norcent LM730 Lcd Monitor Problem


Mine was doing the same had to keep turning it on and off to get it to work then it would not turn on at all green light flashed on and off on front of monitor. I unplugged monitor and green light on ac adapter kept pulsating on and off like a capaci ... Norcent Technologies LM730 17" Flat Panel LCD Monitor

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4711 seconds