Having problems with your E-Machines eMachines Desktop PC ?
Emachine T2542 Won't power on
😍53% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/62-lazy-portable-table.html ➡ sellerscity.net/62-lazy-portable-table.html Adjustable Laptop Stand its platform for whatever you need : Bed & Couch - Book tray - watch movies - dinner table ✅ Now you can enjoy working . ✅ prevent computer neck pain (computer monitor is at eye level) . ✅ prevent overheating laptop . ✅ will serve you anywhere you go get your table today and make your life so much easier ✅it collapses down to a flat surface for easy storing. 😍53% Off for first 100 people Only!😍 🔥 Claim discount here 🔥: ➡ sellerscity.net/62-lazy-portable-table.html ➡ sellerscity.net/62-lazy-portable-table.html 🎁 Makes the PERFECT gift!Posted by SellersCity on Sunday, April 15, 2018
\015 I have an Emachine T2542 with Windows Xp. I had it turned on yesterday and was in the middle of editing some photos, when it shut off. There was not a shutdown screen or anything. It just turned completely off and now it won't turn on. I checked the outlet on the power supply it's plugged into and it is getting power.\015
HERE is a thread I found on another forum relating to the same problem. I guess you'd be better off trying to invest in a better machine. Sorry I can't be of more help. But do go through the link I posted, you may find it helpful.
Should you have any further questions, please feel free to post them here. Please do not assign a rating until you feel your problem is resolved. I will try my best to help you further if need be.
If you are satisfied with my solution or have no other questions, please close the problem by assigning a FIXYA rating for my solution. I would be very grateful for your show of appreciation.
Thank you for using FIXYA!
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have emachine w3400 not powering . plz help
I found this right on this website, hope it works!As for the fans, make sure your connections are tight and in the proper sockets. ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)
Emachine T2542 Won't power on
It looks like your computer's power supply unit is gone. This is common with the eMachine T2542 series. Unfortunately, sometimes this destroys your motherboard as well. ... E-Machines eMachines Desktop PC
My emachines wont turn on
Also in addition to the above, try reseating the ram chips..take them out individually and plug them back into their respective slots..might be the miracle cure..If the motherboard fan turns on, it might just be bad memory..replace RAM chips ... E-Machines eMachines Desktop PC
Emachine wont start
How many hours you working you computer? 1 or 2 or 3 hours?\015\012if you working 2 or 3 or 1 then automaticaly shutdown then, when you push the power button the cpu fan is working but in few minuts shutdown again,.... check you cfu pan maybe t ... eMachines T6211 PC Desktop
Emachine flashing yellow lights, fans power up when P8 is unplugged
I would also suggest that the battery in the motherboard be replaced.That battery is startup power for the computer and if the battery is dead you will have the same symptems of startup power problems!!!The battery you will be looking at looks like a ... E-Machines eMachines Desktop PC
When i turn on my emachines 420 at the mains, the led power light comes on, but it wont do anything else including turning on or off
Hello there,this sounds like a problem with your power supply unit inside the computer,emachines are always blowing there power supply because the one that comes with the computer just is not powerful enough.If you are confident enough around electri ... E-Machines eMachines Desktop PC
Emachine t1840 wiring diagram power switch wire to mother board ?
Because there are so many different case and motherboard combinations\015\012sometimes it can be difficult following the instructions for connecting\015\012the front panel, USB header and audio header.\015\012\015\012Below is a few generi ... PC Desktops
Wont power up
Ok, the best actions here will be to purchase the correct power supply unit. you can order your unit online or , you can purchase it, via best by or office depot. this current supply unit may not have the correct ratings for your unit. if so, it will ... E-Machines eMachines Desktop PC
Dead motherboard on emachines t2984
Contacted emachine and they are completely denying this and told me that since the warranty is out of date, there isn't anything they can do. Never was any recall on this model. ... E-Machines eMachines Refurbished EMA SYSTEM BOARD MODEL T2984 eMachines (102257) PC Desktop
I got an emachines w3650 it wont power on i don't know really anything about computers but i opened the side of it to look in side and saw a wire with P6 written on it hanging and not plugged into anything. should that be plugged in to something? could that be y the comp wont turn on? any ideas or suggestions i would appreciate
In the most basic system setup the power supply will have two wires power the motherboard, one for the CD/DVD drive, and one for the hard drive. there will be extra ones for future upgrades...i.e.2nd hard drive/DVD burner and so on.... On my PC there ... PC Desktops
Wont start up
Hello,is there any power indication? if there is then please unplug the unit from the power outlet and then open the casing and try to refix all the connection inside. If not resolve then try to test one by the parts starting from the pro ... E-Machines eMachines Desktop PC
EMachine T3406 wont boot
Is there a post beep when the pc is switched on. check the memory if it is a beep beep beep sound , also disconect the hard drive, dvd drive, floppy, and any usb devices and see if it boots up. if that fails it does seem like the mother board, also c ... E-Machines eMachines Desktop PC
Powerbutton connection wires were disconnected from motherboard
Look in the manual there is a diagram and pin connections for each wire. ... E-Machines D2046 PC Desktop
EMACHINE T2642 W/ IMPERIAL GV20030812
Can you provide at bit more info?You say it wont power up, are you getting any power through at all? DO the LEDs light up? Can you hear the noise of the fans etc powering on? ... PC Desktops
Emachines t2899 will come on and fans run but screen is still blank
Actually, the monitor is fine. The problem is that the computer isn't booting. The power comes on and the fans spin, but the system board isn't starting. Try reseating the memory modules in their sockets and clearing the CMOS memory using the jumper ... E-Machines T2899 PC Desktop
Emachine wont start, just beeps
This is probably a problem with your DIMM(RAM)\015\012Did u recently install an extra RAM?If yes then remove it because the beep sound is due to the mismatch of frequency of two DIMM's. If not open your computer and check if the DIMM is loose just pu ... E-Machines eMachines Desktop PC
Emachine shut down
I have an emachine T3646 that is relatively new, when I hit the power button on the front it flashes and makes a solid beep but wont turn on, has anyone else had this problem? ... E-Machines eMachines Desktop PC
Wont power up
If you are getting absolutely nothing, and it seems you have checked all the obvious, then I guess its just the board given up ... PC Desktops
T2542 Emachine Is there anyway I can a schematic that shows me how to start troubleshooting the power supply. I turned everything off and unplugged it replaced the power supply with a new one and get a yellow light. The fan came on for a good 3 to 4 seconds but then turned off. any suggestions
It's hard to troubleshoot a power supply. They are very dangerous and contain electricity for some time after turned off. If your new one isn't solving your problem it makes me think it's not the power supply unless it's not powerful eno ... E-Machines eMachines Desktop PC
I changed the fsb from 166mhz to 200mhz on my computer
You will need to clear the coms 0n the motherboard to do this shut it down and unplug it then look for a 3post/pin on the motherboard that says clear coms and has a jumper on it>move the jumper over one post/pin unplug it from the 2pins on the rig ... E-Machines W3052 PC Desktop
Emachine t2596 getting power but wont boot, any ideas?
Have you made any hardware changes recently? When you say it is getting power but wont boot what does that meen. Are you getting error beeps or will it not even try to boot? Give me some detail and we should be able to get you going ... E-Machines Computer Processors
Gatweway lap top button light up, but wont turn on
I'm afraid this sounds suspiciously like a motherboard problem. It would help to know what model etc, as some Gateway & EMachine model laptops have had extended warranties due to motherboard issues, or just go to Gateway.com and research it yours ... PC Laptops
Monitor light blinks but no pic when booted up
I can try to help you,\015\012do you hear the boot beep sound?\015\012if you are not able to hear the beep sound then i suggest you to open the machine and check with the cmos battery if it is working or no.\015\012if your cmos battery is working the ... E-Machines eMachines Desktop PC
Emachine wont power on was working next day wont turn on is t the power supply
There may be many causes.\015\012\015\012First, if you get any Beeps, recommend you to remove and reinsert the Memory(RAM) sticks.\015\012Do try booting after removing the CMOS Battery(The one like a coin on the motherboard). ... E-Machines eMachines Desktop PC
Computer wont turn on
Hi\015\012Bad news. your motherboard has been fried. You could try refashing the BIOS but I've got $10 dollars to your one that it wont work. Best bet - keep the tower, keep all of the running gear but a new motherboard and prosessor are in ord ... E-Machines eMachines Desktop PC