Having problems with your E-Machines eMachines Desktop PC ?

My hard drive is not being noticed - E-Machines eMachines Desktop PC

Answers :

You need to provide more info, what kind of PC is it in, what OS, is the drive showing up in the BIOS at all, what brand of HD is it, is it going in as a slave drive or master, are you going to boot from it, IDE or sata. if its ide check the jumper settings and IDE chain location you want a slave drive(middle of the ribbon cable) then the jumper has to be set to slave, some PC's will not accept cable select, so avoid it when possible, if its at the end of the ribbon cable it needs to be set to master, make sure your bios is seeing the drive correctly, make sure the ide ribbon has a red line down the side closest to the molex power connector otherwise its upside down which can cause the pc to not see any devices (even if this happens with a cd-rom etc thats on ide) make sure the connector is not backwards on the motherboard, if its sata then make sure data and power cables are tight and sats is enabled in the bios. also any error messages you get would be useful. are you referring to the drive you boot from, then it may have failed, if it is a new drive and you are running windows 2000 or xp then it may need formated, same issue occurred with my new sata drive it didn't show in windows until i opened computer management >disk management and formated it to ntfs (windows xpsp2). vista will probably be the same way, however if you have vista upgrade to xp your pc will run faster and more stable, also if your running vista then the computer management tolls, well I'm not sure exactly where they are, I don't use it much, only when i get a pc in at work with it, and usually its to replace vista with XP.
Repair Help & Product Troubleshooting for E-Machines eMachines Desktop PC

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where does the cable labled P7 go - E-Machines eMachines Desktop PC

Hiya,\015\012\015\012I have an image for you to look at, and I will need confirmation that this is or is or is not what you are giving reference to.\015\012\015\012 ... E-Machines eMachines Desktop PC

My hard drive is not being noticed - E-Machines eMachines Desktop PC

You need to provide more info, what kind of PC is it in, what OS, is the drive showing up in the BIOS at all, what brand of HD is it, is it going in as a slave drive or master, are you going to boot from it, IDE or sata. if its ide check the jumper s ... E-Machines eMachines Desktop PC

Emachine has error system32lsass.exe'1073741819

You can try booting in safe mode (Press F8 after the initial beep, but before your PC tries to boot into windows.) then run a virus scan, which may fix everything for you.\015\012Even if you can't boot into Windows, your data is most likely sti ... E-Machines eMachines Desktop PC

Emachines desktop Wont boot. - E-Machines eMachines Desktop PC

A simple and effective task (well most of the time) is to reseat components on the motherboard. This can include unplugging the components, including but not limited to:Hard Drive and Optical Drive CablesIDE/SATA ConnectorsSys ... E-Machines eMachines Desktop PC

Need large disc support for old emachine, flash bios? or try restore cds?

Hi,\015\012flashing a bios, can render your machine/motherboard useless.\015\012You should always ensure any bios download is from a trusted source. if you experience a power failure, or an incomplete bios file. your computers as good as ... E-Machines eMachines Desktop PC

Need manual for Eone 433 desktop computer

I had the same problem recently with an emachines Eone 433 desktop. Taking it apart is certainly difficult. First of all, the metal compartment that holds the motherboard and drives is beneath the CRT monitor. In order to access and remove the compar ... E-Machines eOne 433 PC Desktop

Connecting to my E: drive

Hi fantisy, It's not uncommon for your DVD player to not have the drive letter you were expecting it to have. Let me show you. Place a CD or DVD in to your cdrom drive, close the drawl. Close any windows that may open Ok here we go. Right click once ... E-Machines T5082 PC Desktop

Dell xps 600 windows booting problem

I have a problem thats quite odd...im tryint to install the windows 7 ultimate on my desktop but in the bios it doesn't let me chose to boot from CD or HDD or Floppy it only says boot from sata hard drive or IDE hard drive or usb flash drive or usb d ... Dell XPS™ 600 PC Desktop


You have provided some good information, but more detail is needed.Is the system still under warranty? How long ago did this start? Have you added any new hardware or software?Your reboot issue might not be hard drive or MBR ... E-Machines eMachines Desktop PC

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)

The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

T2893 desktop did not power on when I hit the power button

If you can find someone that has the same model, that is the best way to make sure it fits. Some other motherboards will fit, but you may have to do some work to get them to fit. The best way would be to try to do some research on your particul ... E-Machines eMachines T3830 PC Desktop

I bought this emachine in july and it had to be restored because it lost my personal settings it said then after the restore it lost my desktop icons and taskbar and now it only comes on the widows xp screen then restarts over and over you cant get xp blue screen or anything ...I know i will never buy another emachine piece of **** again and I will tell everyone I meet what kind of garbage it is

If this was a new machine & still under warranty I would take it back to get it repaired. I suspect that it hasgot a hard drive that could be on the way out. If this is a second hand machine, get a new drive & re-install Windows or install Li ... PC Desktops

E machine computer. starts up then it goes to the

This is caused by two files that are corrupt on your system. If you can get to another XP computer and get the following two files from the windows\\system32 folder and copy them to the same location on your hard drive. The easiest way is to connect ... E-Machines eMachines W2686 PC Desktop

Emachine t3092, no video, can't find certain desktop files

If they're not on the drive, they're not on the drive. Your only other option is to search the free disk space for the remainder of those files. For that you can use the free trial of ... E-Machines eMachines Desktop PC

My computer w2686 do not start

I'm assuming that when you say "unplugged" that are you are meaning to say that you're unplugging the IDE ribbon but still leaving the power plugged in to the device.Try resetting your CMOS settings by using the jumper on the motherboard. ... E-Machines eMachines W2686 PC Desktop

I am getting a message that my drive d has low disk space available please help me..

This means that your drive D: is running out of space.1) Make sure that D: is actually a hard drive, i.e. you have two hard disk on the machine, or a single drive that has been divided into several partitions. ... HP PC Desktops

EMachine 2862 Desktop Dead On Power-Up

Check all the leads to the hard drive and check that the fan starts spinning when you switch it on if it dont start then the problem is the switch these do often go and can be easily replaced and they are not expensive i had the same problem and foun ... E-Machines T2682 (000002965) PC Desktop

Display 2010 error message

POST warning message 2010 after BIOS upgrade or hard drive installation - ThinkPad General \011\011\011\015\012\011\011 \015\012\015\012\011 \011\011\015\012 ... IBM ThinkPad T43 Notebook

Extremely slow transfer speeds from IDE hard drive to Sata

Yes, I'm afraid it's some form of difficulty in sending files from the SATA data-stream to the IDE ATA drive. It may be motherboard-specific, I don't really know. However attempting to send data between SATA and ATA drives is as I described above. Se ... Dell Optiplex GX620 Pentium 4 3.4GHz (Open Box Product, Limited Availability, No Back Orders) (248246839OB) PC Desktop

The machine won't recognize the cdrw drive. - eMachines T6524 PC Desktop

First step is to check if your CD-RW drive is being recognized in the System BIOS (basic input/output system).To do this, look for a hotkey listed on the first screen when you turn the PC on. Usually it's F1, F8, F9, F10, DEL, or ESC.Once ... eMachines T6524 PC Desktop

Bootmgr is missing - E-Machines eMachines Desktop PC

Try check the hard drive and make sure the power cord is connected properly the same thing happened to me Bootmgr missing and I tried to put the install disk in there but it still kept saying the same thing not knowing it was the power connector to t ... E-Machines eMachines Desktop PC

Emachine t5048 slow from login to desktop access/clock lag spikes

Let me tell u what all you have to do is go to your bower type in ccleaner this program well eliminated all you trouble then download it and install it after installing it open it, its very simple so u'll understand it very easy now click on run ccle ... E-Machines T5048 (7136) PC Desktop

CD drive not working

Based on your indication the CD drive is clean, and you know the cables are attached to it, inside the computer. (Flat ribbon IDE interface cable, and 4-pin Molex connector power cable)1.Go to Device ManagerLeft-click on Start ... Sony VAIO PCV-RX462DS PC Desktop

Emachines e4026 non-responsive

I don't think it's an overheating CPU. It would stay on for a bit longer if it was that.\015\012\015\012My best guess is a power supply issue. Either your power supply is bad, or more likely something is pulling too much power from it. Emachines a ... E-Machines eMachines Desktop PC

Possible hard drive problem

Hello,To quickly answer your questions and point out the actual limits and behavior based upon your statement.A hard drive that exhibits a sound similar to a broken record normally indicates a damaged mechanical mechanism of t ... HP Compaq Evo Notebook N600c
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6676 seconds