Having problems with your Dell UltraSharp 2405FPW 24" Flat Panel LCD Monitor ?

I can't select the DVI source input on the monitor front panel

\015 I'm trying to select the DVI source input on the monitor front panel but it will only move thru the source inputs 3, 4, and 5 which are s-video, composite, and component. The inputs 1 are 2 are d-sub and dvi. I would like to use DVI. I'm trying to do this in order to get the 1900 by 1200 resolution offered by this monitor. It worked in the past and then suddenly I am having problems with this.\015\012\015\012Thank you.\015\012\015\012Kerry\015

Answers :

The logic board is probably bad. Check out the site www.lcdrepair.us they have installation video on changinging out the board and also sell all parts for that monitor.
Video card in the monitor sounds to have failed. It dosn't take alot to short them out these days.
\015\012Try the analogue port (make sure everything is off when you connect it up) and then see if you get to access it from the menu.
\015\012Sometimes these monitors are a little fussy about selecting things that it didn't detect as valid when it powered up.
\015\012By powering up I mean from when you plugged power into it, not just turning it on with the power button.
\015\012It would need to be unplugged from the wall for about 5 mins to drain out the power that is stored in the main filter capacitor.
Repair Help & Product Troubleshooting for Dell UltraSharp 2405FPW 24" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I can't select the DVI source input on the monitor front panel


The logic board is probably bad. Check out the site www.lcdrepair.us they have installation video on changinging out the board and also sell all parts for that monitor. ... Dell UltraSharp 2405FPW 24" Flat Panel LCD Monitor

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

My acer laptop with windows xp will not allow me to select the optimal resolution for my samsung moniter. How do I fix this?


The Samsung SyncMaster 730b is a 17-inch analog and digital TFT-LCD monitor delivering crisp, clean text and bright, vivid colors. This display offers a 600:1 contrast ratio, 300 cd/m2 brightness, 1280 x 1024 resolution, 160/160 degree viewing angle, ... PC Desktops

No sound from headset plugged into monitor


From the manual I found, this model does NOT support ANY audio connections.\015\012http://www.p4c.philips.com/files/1/170b1a/170b1a_dfu_aen.p ... PC Desktops

Mitsubishi xc-3716c monitor


Model (XC-3716C)Manufacturer's product descriptionMitsubishi represents the pinnacle in technological achievement for multi-person viewing of workstation generated, high resolution imagery such as CAD/CAM/CAE or scientific visualiza ... Computer Monitors

Cant connect pc to tv monitor


You didnt say whaat your graphics card was but if you are using the ONBOARD you might have a couple of problems.\015\012\015\012It might also be useful to know what type of connection you are making. ... E-Machines eMachines T3830 PC Desktop

Monitor not using all available space


Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

Dell228wfp on start up pwr on is green screen


Either the cable is not connected to the proper port or the display-source is not configured properly.Here's what you can try.\012\012Ensure that you have connected the VGA/DVI cable in the correct port. If you ... Dell E228WFP LCD Monitor

Samsung T220HD - can't access HDMI input sources


If it like my monitor, same hookups as yours, then when you want to use the hdmi port you need to disconnect the dvi cable. The monitor cannot read from hdmi & dvi when both are connected, Try this & see if your PS3 works. Good luck. ... Samsung T220HD LCD Monitor

My monitor has gone blue, what do I do - LG W1934S-BN 19" Monitor


Assuming the monitor is powered (if unsure, check the that power cord is connected to a live 120 volt source and the other end is connected to the monitor), check the data (analog VGA or DVI) cable between the monitor and the computer. Make sure the ... LG W1934S-BN 19" Monitor

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Samsung 931 B - Dual monitor setup. one monitor no longer shows anything - LED is blinking about once every 0.75 seconds. either power cord or either source cable works with other 931B, but broken one shows nothing on screen, ever. screen actually blinks SLIGHTLY at same interval as LED. not using DVI cable- using old school rgb on each. i need two identical monitors. fix this one (myself or professionally) or get new one?


The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way ... Samsung SyncMaster 931B 19" LCD Monitor

Analog Dead/DVI OK


Sounds like the video controller board inside the monitor has blown a transistor. They are only about 3mm wide so not easy to spot even if you look closely.\015\012\015\012It's a fairly rare fault, though not unknown to happen without rea ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.


OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

RE: No Input Signal


What monitor are you using?Depending on what model it is, there should be a button on the front panel for "auto tuning" or "input select"; you could be using it in DVI mode instead of VGA. ... Gateway GT5032 (827103078121) PC Desktop

Describe how to update blue ray player - Sony HESV1000 200 Disc Blue-Ray Server


\015\012Software Update Instructions\015\012\015\012\015\012\015\012WARNING!! Do not power off the Home Entertainment Server or disconnect it from the AC power outlet. Doing so may damage the H ... Sony HESV1000 200 Disc Blue-Ray Server

No input data


Generally this means that the monitor is not getting a signal from the computer.\015\012\015\012You can also get this message when a computer goes into standby. Pressing a key or moving the mouse can bring it back. \015\012\ ... HP PC Desktops

Dual monitors can't extend desktop


Connecting Two Monitors\015\012\015\012Use\015\012the cable adapter to connect a VGA\015\012monitor and a DVI monitor to the\015\012DVI-I connector on the back panel. ... Dell Optiplex 755 Ultra Small Form Factor Intel Celeron Processor 430 1.8GHz, 512K, 800... PC Desktop

I have a dell 2001fp. it is locked and can not access it to change it to vga, however it has a fine picture on dvi, any ideas


When you change to VGA, you have to change cables to a D-SUB cable. If you want to use S-VIdeo, you have to use an S-Video cable. You could actually have four different devices using the four different cables connected to the monitor one time, and ch ... Dell UltraSharp 2001FP 20.1" LCD Monitor

Front panel lights blink on/off once per second


Hey,\015\012 I would like to agree to the diagnosis that you have done on the monitor . Thanks for a well complied solution. You can try the following website\015\012 ... Dell UltraSharp 2005FPW 20.1" LCD Monitor

Monitor switchs between digital and analog


I had a similar problem, the monitor was going blank once in a while (since I don't have a VGA input), so I switched the Auto Source feature to\015\012"Manual" and so far it's working fine for the past 2 days, if I run\015\012into the problem again I ... Computer Monitors

Dell 1704FPT won't come on at all. Only the sound


\015\012Check connection integrity at both ends of the \015\012 video cable\015\012 \015\012Ensure the monitor and computer are plugged in to a working electrical\015\012 ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

¿que tarjeta grafica puedo poner ?


Solamente necesitas comprar una tarjeta de video AGP the mas o menos 256 MB the memoria. uesta alrededor de $60 en eBay.Galaxy GeForce es suficiente. que tenga VGA y DVI conecciones. ... PC Desktops

Resolution issue with Emachines E211H flat panel monitor


Try to restart ur PC then it will auto detect ur monitor via DVI input. Actually, no driver needed for monitor in now day, they all come with plug and play. ... E-Machines eMachines Monitor E15T4

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO PUT IT UP ON. THE JVC REMOTE MAKE IS CALLED RM-C55 BUT I DONT KNOW WHAT THE TV IS CALLED. PLEASE CAN U HELP


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6683 seconds