Having problems with your Dell UltraSharp 2001FP 20.1" LCD Monitor ?

Problem with Digital Input

\015 Hi,\015\012 \015\012Well Im having a DELL Ultra sharp 19" monitor and have a problem, Im able to view if I connect analog cable. But if I connect Digital input my system works till it boots and after that it is completely blank, then when I switch to analog then im able to view my desktop. \015\012 \015\012Kindly help me out with this.\015

Answers :

Hi,

You may need to switch monitor selection in your Display Properties. You need to activate twin/dual view in your Display Properties. Right click on any\015\012clear area of your desktop, click on Properties, click on Settings tab,\015\012select monitor 1 or 2 depending which is your primary and which is your secondary (analog/digital). Check (or uncheck-whichever works) on box "Extend....".\015\012Apply, OK.

There is an application that is supposed to facilitate twin or dual view\015\012configuration, UltraMon. This may be better/safer way to address your\015\012concern.

Hope this be of help/idea. Pls post back how things turned up or should you have other concerns.

Good luck and kind regards.
Repair Help & Product Troubleshooting for Dell UltraSharp 2001FP 20.1" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

My viewsonic mo9nitor says analog not digital on


To clarify, you know that analog is referring to the VGA 15 pin video input, and digital is referring to the DVI video input, right? You can't have the digital video unless you use the DVI input, which requires a DVI output from your computer (and a ... ViewSonic Computer Monitors

I need help setting up the DVI input.


Hi,\015\012\015\012There are two ways to do this.\015\012\015\012First and simplest is to simply shutdown the pc, disconnect the analog from the back of your PC and connect the DVI cable to the PC and monitor. When you turn i ... ViewSonic VX924 19" LCD Monitor

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.


OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

Problem with Digital Input


Hi,You may need to switch monitor selection in your Display Properties. You need to activate twin/dual view in your Display Properties. Right click on any\015\012clear area of your desktop, click on Properties, click on Settings tab,\015\ ... Dell UltraSharp 2001FP 20.1" LCD Monitor

CHIMEI CMV T39D


Hello, Sorry to hear that you are having problems with your monitor. While the monitor is turned on and plugged up to your computer system, try looking very closely at sharp angles from above, if you can barely see your desktop the problem is ... Chi Mei Corporation CMV-T39D Monitor

How to use BA7500G on another computer


\015\012I have the same problem except i'm using a macbook and i'm trying to connect the speakers. My macbok accommodates optical digital audio output, but you have to buy a  a standard toslink cable with a toslink mini-plug adapter.  ... Boston Acoustics BA7500 Computer Speakers

Graphics card hdmi output to monitor digital input seems to not be working


I am having a problem with my sound and i need sound driver for dell dimension 2350 ... Gigabyte PC Desktops

No digital input


The digital input is for conection to dvd player or any other device that has digital output. so if you connect any other type of output it will not work. i have same speakers for couple of years, and know them inside and out (awesome speaks) i hope ... Logitech Z-5500 Computer Speakers

I cannot get any sound. - Princeton Digital VL1918 Monitor


The problem can be the computer settings or the monitor in built speakers.so to confirm the fault first connect the external speakers to your computers mother board .by computers mother board i mean the mother of the CPU in your system.\015\012connec ... Princeton Digital VL1918 Monitor

Chimei CMV 938D can't change input settings cause can't see screen


... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

Monitor switchs between digital and analog


I had a similar problem, the monitor was going blank once in a while (since I don't have a VGA input), so I switched the Auto Source feature to\015\012"Manual" and so far it's working fine for the past 2 days, if I run\015\012into the problem again I ... Computer Monitors

Composite Media Win TV-PVR-USB2 product. Can not receive anything from Composit Input connections. Works well with TV RF input. Used XP and VISTA operation systems. Have also tried to use Nero 6 for input control no video input. What do I have to do to get input from the Composite cables. Also the Remote does not have any effect on the unit. Bought this unit for converting Digital movies and VHF tapes to CD or DVD. the TV portion was just extra.


Well it can be one of two problems,,\015\012\015\012Check your settings for the device, especially your input settings and see if composite is elected or disable. Look on the net for compatable recording software for the composite input a ... PC Desktops

DVI connection fault


Same problem this morning. wondering if the money i spent was well or not.not happy. ... ViewSonic VX2255 Monitor

Help Please! I am getting a "dvi digital no signal video input" message on my monitor and then it goes black. I have replaced the video card and still have the problem. My DVD drives no longer open as well. Are these related issues or two separate issues? Any suggestions on the cause of either problem? Could someone explain what the dvi digital no signal ...message means? The monitor works on another computer so I know it is not the monitor. I have also replaced the cables to the monitor.


Power supply is bad on one of its legs(12 volt or 5 volt) you can have that bench tested at a service center or use a volt meter to check the output on the cables probably the 5 volt as the agp and the dvd roms cdroms etc need 5 volts to operate ... NEC MultiSync 1760NX 17" LCD Monitor

Logitech Wingman Extreme Digital Calibration


... Logitech WingMan Extreme Digital 3D Joystick

Rear speakers not working


If the test program works using a specific operating system (lets say Windows), and all speakers work.....this means the card AND the speakers are OK AND the OS allows functionality (the drivers are good). This leaves us with...what kids?,,,, that's ... Logitech Z-5500 Computer Speakers

My Brother is in the US Army,in Pakistand and bought and sent me a WESTERN DIGITAL 320gb "MY BOOK" model #WD3200do32-000 and i just got it and opened it to find that it has a foreign plug that is not like the house plugs in the U.S. Can i use a plug i found here that went to a electric shaver?It fit the "My Book" and has the U.S. end to plug into 110 house current.Nether of us was thinking at the time about any plug and now that ive opened it am i out of luck PLEASE HELP TONY SHELTON


TMI, but the cord might be fine. Just read the input spec on the power brick or per the manual, and if it can tolerate 110vac .5A (e.g. INPUT: 100-340VAC 0.5A) it will be okay. The maker doesn't know where that shaver cord has been, so of course th ... PC Desktops

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Monitor no longer will switch to Analog (VGA) source.


Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors

Digital mode of VX2035wm has stopped working


I recognize the model number as a Viewsonic model. Check the digital input using another computer to make sure it's the monitor.If you're brave enough, do this:Open the unit and check to see if any of the\015 ... Gateway FPD2275W LCD Monitor

Boston Acoustics Computer Speakers no sound


This speaker system requires a digital audio input, which most older systems don't have. The sound card that was built into your Gateway can put out either a digital or analog signal depending on how you have it set. Chances are your new sound card ... Boston Acoustics BA7500 Computer Speakers

BA7500g speakers won't work with my mac


I have the same problem except i'm using a macbook and i'm trying to connect the speakers. My macbok accommodates optical digital audio output, but you have to buy a  a standard toslink cable with a toslink mini-plug adapter. \015\012Since ... Boston Acoustics BA7500 Computer Speakers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5639 seconds