Having problems with your Dell UltraSharp 1707FP 17" LCD Monitor ?

Dell monitor goes into power save mode immediately

\015 As soon as I turn my computer on dell monitor goes into power save mode immediately after I just changed out DVD burners\015

Answers :

When it have this kind of error is a problem of the powerboard.
\012 Anyway you must open it and look at the all capacitors and if are them inflated, if them are inflated must change them.
\012
\012 But can be a problem with inverters... control the transistors - MOSFET on the powerboard.
\012
\012 Good luck!
The burners may have nothing at all to do with this. Try the monitor on another computer (a laptop will do) if you have one. If the problem perists with the monitor, then the moniitor has failed. If the monitor works on another computer, or you do not have another to try, then start the computer and tap the F-8 key to boot to safe mode. If that gets you a display, then fix the display settings, also check the device manager for any signs of hardware trouble, and make any corrections that may be needed, and reboot. If safe mode does not get you a display, try disconnecting the new hardware. If still no joy, I'd say it's the monitor.
Repair Help & Product Troubleshooting for Dell UltraSharp 1707FP 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell monitor goes into power save mode immediately


When it have this kind of error is a problem of the powerboard.\012 Anyway you must open it and look at the all capacitors and if are them inflated, if them are inflated must change them.\012 \012 But can be a problem with inverters... ... Dell UltraSharp 1707FP 17" LCD Monitor

My monitor shuts down after one second. - Dell Dimension 3100 PC Desktop


Dell monitors automatically go into power-save mode after a preset\015\012amount of time when the computer is inactive. The Dell monitor will go\015\012completely black, instead of showing a screensaver. This doesn't mean\015\012that your ... Dell Dimension 3100 PC Desktop

Problem w/Dell E176FPf monitor stuck in power save mode


Ok if it the monitor works fine on another unit discount it out of the equation as a monitor problem.I would suspect the driver on the PC that delivers the problem, especially the video card.. Check that the cable is also on tightly. remo ... Dell E153FP 15" LCD Monitor

Dell monitor dialog box says monitor is in the power save mode


Actually, it most likely is not the monitor which is in "power save mode", it is the computer itself.\015\012\015\012When you cannot get a computer out of "power save mode" by any other means, typically the cause is that ... Dell Dimension 2400 PC Desktop

I have a new Dell Studio 540 computer and I'd like to hook it up to my Gateway EV910 monitor. I connected everything correctly. The monitor has power, turns on to the monitor self test screen where it tells me everything is okay with the monitor and then the monitor goes to power save mode. I think that I need to put a Gateway driver on the Dell in order to get it to recognize and communicate with my monitor. How do I do that? Where do I get the driver? Help!


It should recognize it immediately, and the only problem that i can think of would be your graphics card not supporting it.\015\012\015\012Here is the driver for it:\015\012 ... Gateway EV 910 19" CRT Monitor

Monitor automatically clicks into power saving mode


I have an LG W2261V, and an old Sharp LL-T19D1-H. The PC runs both just fine, and the PSU has plenty of power. Unfortunately the LG handles power save mode very differently, where the LG would not switch on after entering this mode unless reset (unpl ... LG Flatron L1951S 19" LCD Flat Panel Monitor

Monitor Goes into Power Save Mode


... Dell UltraSharp 2408WFP 24" LCD Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

My monitor Goes blank after about 2 seconds


Dave, You failed to state if these monitors are LCD/FPD or are they old tube type? I'm going to assume that they are of the flat screen lcd type. all monitors of the lcd type need what is called 'backlighting' to display the video information. In you ... Sampo Computer Monitors

I only get power saving mode on my screen then screen goes black


Inside the power pack is a pulse IC chip they fail and cause all kinds of havoc also caps can cause issues unaccounted for, I would start at replacement of the IC about 2 dollars on E bay, and replace any bad capacitors you can see, they look domed o ... Dell UltraSharp 1800FP 18.1" LCD Flat Panel Monitor

Monitor automatically clicks into power saving mode


Check the primary settings for your default video card. ... Dell Dimension 4600 PC Desktop

Monitor automatically clicks into power saving mode


Laptops often have a function key which switches from laptop only, external monitor only, laptop & external. One of the top number keys, along with the function (fn for short) must be pressed simultaneously to step through these.Wher ... LG L1915S 19" LCD Monitor

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

My 5305 constantly goes into power save mode - Dell Inspiron 530s Desktop Computer


HiThank you for your queryThis is a common fault on Dells please try the followingIt seems it is a motherboard battery problem. try this.\015\012It most likely is not the monitor which is in "power save mode" ... Dell Inspiron 530s Desktop Computer

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Gateway GT5220 PC Desktop

Dell Dimension 4600C


Check your bios settings to make sure your video settings are correct for whatever card you're using. It sounds like you have a conflict between an onboard video card, and an aftermarket card. ... Dell Dimension 4600 PC Desktop

Monitor light goes to orange & stays there.Stuck in power save.


Hi, Robin.Usually a green to orange light means that the monitor is not getting activity from the PC. Wiggle the monitor's cable (VGA cable) to see if any difference. The VGA cable could be faulty.To narrow down wh ... Dell OptiPlex GX260 Intel Desktop PC - Intel Pentium 4 2GHz, 256MB DDR, 40GB HDD, CD-ROM, Windows XP

Dell Dimension 4600 Won't Boot Up, Steady Amber Light is on tower


It could very well be the Mobo or the power supply. You may want to try\015\012to take the CMOS battery out for a few mins as well, I have had\015\012problems with that. But I would try PS first, get one from Circuit city\015\012or another electronic ... Dell Dimension 4600 PC Desktop

Dell SP2208WFP Flat Panel Monitor goes straight to power save mode


If the monitor is not turning blue that means it isn't picking up on the signal that is coming to it.\015\012Pushing the power button on the monitor should make the monitor work and give you a no signal note if it isn't getting signal.\01 ... Computer Monitors

In power save mode


The monitor is not receiving signal from the computer. Is the power light on on the computer? If so - press and hold power button on computer until the power light goes off, then press again to restart. If the computer starts and you still have no ... Dell E173FP 17" LCD Monitor

Dell screen (1901FP) won't come out of power saver mode


Hold down the Fn and F8 keys, and it worked fine for me.\015\012 \015\012or\015\012 \015\012if your problem is you cannot wake from power saving mode (after your PC goes to sleep, then its probably just the driver for your video card). VISTA has some ... Dell 1901FPt 19" TFT LCD Flat Panel Monitor

My LG flatiron W1943TB turns on, says analog power saving mode, goes black and then the power button flashes.. but the monitor is hooked up to my dell notebook bc my LCD died


Hi erin mckinle,\015\012\015\012That is probably it's, uh, analog power saving mode. When the screen goes black and the power button flashes, make some mouse gestures or hit some keys that would not affect anything (try spacebar). That should b ... LG W1934S-BN 19" Monitor

Monitor goes into sleep mode after a few seconds


This is normaly cause by incorrect power management settings.\015\012\015\012check power management setting in both windows and your computers bios\015\012\015\012you will not need to worry about the power management settings ... HP Pavilion a620n (PC028A) PC Desktop

Blank Laptop Screen


The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook

Monitor goes into Power Save mode unexpectedly


What are your settings in Control Panel, Performance and Maintenance, Power Options? Do you leave your pc on all of the time or do you turn it on just when you need it? If you are getting lines on your monitor, it is possible that it's starting to gi ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7623 seconds