Having problems with your Dell PowerEdge 1600SC Server ?

Dell PowerEdge 1600SC Server problem

\015 Hi,\015\012\015\012I have a Dell PowerEdge 1600SC Server. Yesterday I found that server is not responding (Hanged). I restarted it by RESTART button on front pannel, on booting it shows "memmory has been changed" cheked all devices connected and after two minutes it shutdowns. I again start it and now it boots perfectly with no error but after two-three minutes it shutdowns again.\015\012What could be the problem?\015

Answers :

I had the same thing happen in a 600SC about a month ago.
\015\012Replaced the memory, and it fixed the problem.
\015\012
\015\012It did the same hang. Would run fine for any where from a hour to 3 hours, and then quit (hang). And I got the same message. Talk to them and it was a short in the memory module, so some times it would read the entire stick, other times it would "not see it", and that would lock the OS.
Repair Help & Product Troubleshooting for Dell PowerEdge 1600SC Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell PowerEdege 1600SC not recognizing IO devices


Just go into the bios and insert the correct parameters. you shut it off before it could save the settings. Or hit fi on boot and it should take you into the bios and you cand sort it out in there. If you want an easy way, just do a system restore. S ... Dell PowerEdge 1600SC Server

Dell PowerEdge 1600SC Server problem


I had the same thing happen in a 600SC about a month ago.\015\012Replaced the memory, and it fixed the problem.\015\012\015\012It did the same hang. Would run fine for any where from a hour to 3 hours, and then quit (hang). And I ... Dell PowerEdge 1600SC Server

Dell PowerEdge 1600SC Server occasionally beeps when running


Can you tell for sure where the beep is coming from? Could it be the disk controller card beeping? I believe the PERC cards have a separate speaker on the card itself. If you are lucky maybe it is warning that it's battery is bad. If you are less luc ... Dell PowerEdge 1600SC Server

No Boot on 1600sc


The easy answer is:\015\012\015\012Did you ensure the CPU fan connector is attached to the PROPER motherboard CPU fan power pins?\015\012\015\012The 2nd easy answer is:\015\012\015\012Are you sure your CPU is properly placed inside the socket? Could ... Dell PowerEdge 1600SC Server

Install windows xp pro


Hi \015\012My is working , i have same dell server 1600 , i download the driver from LSI website here is the link \015\012 ... Dell PowerEdge 1600SC Server

1600sc second CPU


Hi\015\012\015\012Yes, some systems (newer PowerEdge Servers, generally 6/7th Generation and above) have onboard VRMs.\015\012 \015\0121600sc is a 6th gen PowerEdge (with Simple Computing). I can checked and be ab ... Dell PowerEdge 1600SC Server

Poweredge 1800 server


Hey,I looked over the spesifications for the poweredge 1800 servers, go ahead, it will work perfectly but there is one problem in the windows XP setup, you will need to insert / load SCSI or SATA drivers for the hard drive With a floppy d ... Dell PowerEdge 1800 Server

Dell Poweredge 1800 server


Hi the Power Supply also needs to be upgraded for the additional RAM and new CPU . Please look into this aspect. My opinion a slightly Overrated PS would be better . ... Dell PowerEdge 1800 Server

Can not access bois


My Dell 1600sc hung at bios screen. Progress bar qas about 10% . Problemed turned out to be a corrupted memory module - reved 3 out of 4 and tried to run worked and then process of elimination ... Dell PowerEdge 1600SC Server

No power to dell poweredge 1600sc. Redundant power supplies have no lights.


Either the power supplies have both failed, which is unlikely, or they are not connected to a hot outlet. Frequently servers are connected to uninterruptible power supplies (UPS) instead of being connected directly to a wall outlet. Make sure the U ... Dell PowerEdge 1600SC Server

Our 1600sc dell server is beeping continuosly.


Check the PowerEdge Raid Controller for parity problems. Sounds like the status on the physical volumes participating in a RAID array has been degraded.Loud beeping from a drive is usually an indication that an invalid drive array member ... Dell PowerEdge 1600SC Server

NO Audio out put


Dellpoweredge servers are not needed for sound. DELL support will notsupport any sound ca ... Dell PowerEdge 600SC (Refurbished) ( pe600sc/124 ) Server

Dell poweredge 1650 and norton ghost


Okay, hate to answer my own question. Where I got confused was with the protocol.ini file that is used in Norton Ghost on a boot disk to load the network information, including the network protocol to be used (netbeui in this case) and what network ... Computer Servers

Problem I have dell server poweredge 830 and install the window xp server 2003 a problem has occured. When i try to reinstall the server 2003 then the disk is formated automatically. data is lost. the system is not booted from server 2003 CD. Plz tell me solution. i shall be thankful to you. Abdul Razzaq


This server direct not boot by windows cd....and u any time install window u lose the all data....because they have scsi hard drive and configuring bydefault Raid 5 ......so plz make backup before u start this prosiger.......Dell providing u lo ... Dell 2.8 GHz Second Processor for PowerEdge 830 Server Pentium 4 (DF904) Processor Upgrade

Problem in reboot the server in domain


We are having one server poweredge 2900 which was open and did some preventive maintenance for dust and other diet. But after the preventive maintenance, we try to switch on the server but the hard disk drives cannot display at the same time. ... Dell PowerEdge 2950 (becwfk1_6) Server

Flshing Red Light on Dell Poweredge 1800 Server


I finally made contact with our IT dept who were abole to carry out a remote diagnostic test.\015\012\015\012Problem has now been identified (problem with tape drive) ... Dell PowerEdge 1800 Server

Dell Poweredge 1800 megaraid Error


I'm glad to hear your using Linux. It sounds to me like you have bad sectors on your Hard Drive but I can't be sure from what you describe above. I need more info. Is it hda sdb or what? dev What? I'm pretty sure it's a hardware problem. Most of the ... Dell PowerEdge 1800 Server

PE 1800 Power Supply Fan Does Not Turn Off When Shut Down


You may have to reomve the system cover\015\012and access the fan inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting ag ... Dell PowerEdge 1800 Server

Hi i have a dell poweredge 2850. Orange LED blinking


It sounds like a hard disk has failed or fallen out of sync.\015\012This can be a serious problem if not addressed ASAP.\015\012\015\012Call Dell, they have lifetime phone support for their servers.Write down the Express ... Dell PowerEdge 2300 Server

Beeping PowerEdge 1300


When a Dell server beeps in every 3-5 second that mean it comes from Raid controller.Dell calls PERC Controller.It usually reason of a disk failure.Install open manage server administrator on your server.See which disks ... Dell PowerEdge 1300 Server

Dell Poweredge 4300 Bootup problem after cmos battery replacement


Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

No Video Signal on 1600sc


I also have this problem with my Dell Poweredge 1650, integrated Ati Rage XL doesn't work. But when I add PCI graphic card, I get the video from it. Could integrated video be somehow disabled? ... Dell PowerEdge 1600SC Server

I have an issue with the Dell PowerEdge 1800 video card. It displayed all the garbages (unreadable words) on the monitor when I first booted up or in the Windows 2003 OS. I went out to buy an EVGA e-GeForce 6200 PCI-E video card but it did not work in any PCI slots. Any advice would be appreciated?


Hi ngot01Not knowing your application or tasking for your server, i cant make a full recommendation. I'm presuming you are not wanting to use this for a gaming machine.One very determining factor is whether you are running 32bit or 64bit ... Dell PowerEdge 1800 Server

Problem rebooting Dell PowerEdge Server 2600


ERROR 02A2: BMC System Error Log (SEL) Fullpress F1 to continue or F10 to enter BIOS.I wait for 2 minutes without doing any thing my server get started normally.Please help me how to stop this error ... Dell PowerEdge 2650 Server

My Dell PowerEdge 840 will not allow me to install Windows 2000 Server software. Evidently, the 840's graphics card does not contain the drivers for Windows 2000 Server. Is there a solution?


I am not sure where you got your information but I just checked Dell's website and they have Windows 2000 drivers for your server which include the video driver.\015\012\015\012 ... Dell PowerEdge 1600 ( pe1600sc/118/np ) Server
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6649 seconds