Having problems with your Dell OptiPlex GX280 PC Desktop ?

Cannot get 2 IDE devices to show in bios.

\015 I have a dell optiplex, the primary HD is a Western Digital 160gb SataI also have a LG DVD/RW combo drive set to master on the IDE channel. I recently attempted to add a 2nd ide maxtor HD and for the life of mecannot get both ide devices to show in the bios.. I've tried settingthe ide hd as both slave, master and cable select and the dvd drive the same to noavail, always one will show in bios but the other won't.. however bothide devices will show in windowsXP and work just fine.. being that Ineed my drives to be bootable I need them to show in the bios as well.I've tried 2 different IDE cables now one being a brand new asus cable.. I'm curious as to whether it could be a power issue?My power supply is 500W +3.3V +5V +12V -5V -12V +5VS8 28.0A 35A 25A 0.5A 0.8A 2.5AI'm running currently:1 WD JS1600 SATA HD1 Maxtor 7200rpm IDE 1 LG DVD/RW COMBO and most importantly, the energy hog PNY GEFORCE VERTA 9600GTOther steps I've taken so far has been updating the bios, switching the cable and jumper settings to every possible combination, other then switching my Sata jumper settings which is OPT1 (I'm clueless on sata jumper settings).The pc boots fine, although seems noticeably slower in boot and load times (although I had a virus or 2 recently that could be causing that) my main C: shows both in windows and bios, my dvd drive shows in both as well, my f: (ide hd) shows only in windows, even in disk management and works just fine. Any advice would be highly appreciated as I've tried numerous forums, dell tech etc to no avail thus far. Cheers.\015

Answers :

Does the computer have two IDE channels? If so set the Maxtor HDD as master on the primary channel and the DVD drive as master on the secondary channel. Also right click on My Computer, left click on Manage and left click on Disk Management and see if the drives show up there. Also check the boot order in BIOS.
Repair Help & Product Troubleshooting for Dell OptiPlex GX280 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cannot get 2 IDE devices to show in bios.


Does the computer have two IDE channels? If so set the Maxtor HDD as master on the primary channel and the DVD drive as master on the secondary channel. Also right click on My Computer, left click on Manage and left click on Disk Management and see i ... Dell OptiPlex GX280 PC Desktop

Computer has frozen on windows logo


1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

I have a dell optiplex, the primary HD is a Western Digital 160gb Sata I also have a LG DVD/RW combo drive set to master on the IDE channel. I recently attempted to add a 2nd ide maxtor HD and for the life of me cannot get both ide devices to show in the bios.. I've tried setting the ide hd as both slave and master and the dvd drive the same to no avail, always one will show in bios but the other won't.. however both ide devices will show in windowsXP and work just fine.. being that I need my d


Hi thereWhen you into the bios settings choose default bios settings and save, reboot the machine and have a look in the bios again to see if the bios has picked the drive upGood luck and kind regards ... PC Desktops

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Can't get sata connection to work on new blu-ray rom


Oilers5, let's check a few basics first. Double check your dvd's data & power connections first. Everything good? Next, you need to get into your bios. Your blu-ray is connected to the SATA controller on the motherboard. Though I do not doupt the ... PC Desktops

Highest Priority Problem: HDD moved from old machine works but is physically damaged . Trying to clone/ recover using DataLifeguard and Acronis. Been trying for days and always fails although the damaged drive will still start windows. The bios is showing my SCSI as primary and HDD or DVD as secondary depending on jumper config but it will still boot to drive not showing in bios. I finally got it to boot with DVD removed and old/new HDD on IDE cable (showing SCSI (with no MBR) as master and slav


If the hard drive is physically damaged , that means that hard drive motor has blown, or that drive heads are broken.\015\012\015\012In that case you cannot use such software as DataLifeguard and Acronis, and you risk that your SC ... IBM eserver xSeries 232 8668

V2300cto intelpro wireless problem


Download hirens boot cd, this cd contains all the diagnosic and repair software on it you will ever need, test the HDD and see what it says about the drive ... HP Compaq Presario V2000 Notebook

My hard drive is not being noticed - E-Machines eMachines Desktop PC


You need to provide more info, what kind of PC is it in, what OS, is the drive showing up in the BIOS at all, what brand of HD is it, is it going in as a slave drive or master, are you going to boot from it, IDE or sata. if its ide check the jumper s ... E-Machines eMachines Desktop PC

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

ASUS P5GD1 motherboard purchased in 2005 - I can't find manual - need to connect a 1TB SATA drive - I have 1 IDE 320 GB drive and a Plextor DVD burner and a LG CD burner connected now - Problem is - can't get SATA drive to show in BIOS, Device Manager or My Computer - I had no problem with it being recognized before I installed the LG CD burner - I can't get both to be recognized at the same time - and can't check to see if I have the connections in the right places on the board because I haven


Be prepared as this is a lengthy solution.I like to give a complete solution, to try to avoid possible errors.As requested here is the Asus P5GD1 motherboard manual, (Users Manual),http://support.asus.com/download/downlo ... PC Desktops

CD drive is not recognized


Step 1: Checking for CD/DVD drive in BIOS Make sure the drive appears in Setup. The drive has to be detected in the Basic Input/Output System (BIOS) before Windows can see the drive. Check for detection as follows: 1.Turn on ... PC Laptops

Our DVD player on our laptop is not working and this is the comment we get from Device manager - Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.


Hi,It sounds like your DVD drive has become slightly unseated in it's mount (was the laptop dropped recently?) or else information about it has become corrupted in the operating system. Will the machine boot to a CD or DVD if ... Toshiba Satellite Pro L300D-EZ1002X Notebook

GMA 4082n device driver not working properly code 39


Since the optical drive is a plug and play device and root drivers are in the bios. I'm going to suggest a bios flash or update. Keep in mind that the bios are very important and you don't want to screw them up, so, download and save the flash before ... Toshiba Satellite A135 Notebook

My CD/DVD drive no longer shows up in My Computer


Since you have tried most of the stuff (even registry editing o.O), If you be logic to take the next step of assuming there might a hardware fault. \015\012\015\012When the drive have power doesn't mean its working properly.\015\012 ... Dell Inspiron 6400 Notebook

Toshiba Tecra 8100 PC Notebook


If it can boot up windows, then the harddisk is not locked(anymore, after entering the correct password),a slow performance of windows can be sped up by performing a harddisk defragmentation (open windows explorer, right-click onto harddisk, s ... Toshiba Tecra 8100 Notebook

PXE-E61 Media Test Failure PXE-M0F Exiting PXE ROM


The laptop not recognizing the boot devices except the network boot that it found but there was no connection so it exit the pxe rom. first you need to open up the laptop and see what is running around inside maybe metal and your in for trouble if it ... Acer Aspire 5100 Notebook

Laptop will not boot from either hard drive or boot cd - sometimes


Sounds to me like both of you may be having hardware issues. When you try to enter the BIOS, it will poll all connecting ports (IDE, mini-PCI USB Hubs etc) to find out what is attached so it can be manipulated in the BIOS utility (of course HP/Compaq ... PC Laptops

MY CD/DVD Disk drive will not read anything


Physically take out the drive and reseat it back into place. Then turn the laptop on and go into your bios by pressing F2. If the cd drive shows up in the BIOS then that means the system is seeing it properly. If it doesn't show up in the BIOS the ... Toshiba Satellite A200-0ET00X Notebook

Key board not working


It's a hardware issue,\015\012Maybe RAM or hard drive..\015\012\015\012Did you get it used? If so the password was set b4 you purchase it, and will not show up when you type,,,It stays hidden.\015\012\015\012Your getting ... HP Pavilion dv9000z Notebook

New larger hard drive can only be detected as Primary Slave


Floydage, some ribbons are different in the orentation of pin#1. try a differnent cable...but you said that you tried that right.? have you tried to make sure you have the latist BIOS. It could be this paticuler drive have a different bios it self ... PC Desktops

Acer T-180 hangs at "Verifying DMI Data"


The cause of this problems is a corrupt boot files, Settings for hard disk drive are not correct,Floppy diskette or CD in computer causing issue, Boot devices not set properly, BIOS corrupt or misc. hard disk jumper setting not set properly, Connecti ... Acer Aspire™ T180 PC Desktop

HELP - think my dvd/cd drive is corrupted


The link below will take you to the Dell download site for the Inspiron 1501. You can download all of the drivers from there. ... Dell Inspiron 1501 Notebook

My Dell Desktop cannot start in Safe Mode


Hi there,\015\012 you mention you have change your hardisk,you have to check if your hardisk was configure in cmos and bios set up, first whaen you start your computer press F2 then bios set up appear,check your device if \015\012was ... Dell Dimension 3100 PC Desktop

Before boot menu problem


Lets check & see if your hard drive is still bootable before doing anything else. As soon as you turn on the PC start pressing the F8 key every 2 seconds on the keyboard. A Boot menue will come up. Choose your hard drive by moving the up or down ... Compaq Presario 4090US (470016-303) PC Desktop

I have the acer aspire 3680 with built in bluetooth. i upgraded my pc to vista ultimate about a year ago and since then i have not been able to get my bluetooth to work. it wont even blink blue. i even went to the acer website and downloaded the bluetooth device driver and it said that it could not even locate the bluetooth device on my computer. how can i get it to work again??


It sounds like the blue tooth device was disabled on your computer. Try to go into the control panel and then double click on the systems icon and get into the hardware manager ( i have not had the pleasure of working much with vista so you may have ... Acer Aspire 3680 Laptop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7836 seconds