Having problems with your Dell E172FP 17" LCD Flat Panel Monitor ?

Cannot change monitor settings

\015 Reinstalled windows xp pro on dell with 17in monitor, cannot install new driver, click on advance , properties will not let me change settings\015

Answers :

What driver do u wann install thx nick
Repair Help & Product Troubleshooting for Dell E172FP 17" LCD Flat Panel Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Change settings and hold them on vw 192 T asus monitor


Hi Paul,\015\012\015\012Hope this solves your problem same I met before. There are a lot of queries it may involve here to streamline the problem. Well, first try to reset the monitor setting manually in OSD mode, then select different fr ... ASUS VW192S Monitor

Need to change resolution but cannot get onto desktop to do so as the monitor just goes to sleep


Plug it into your laptop and change the settings to the monitor to 800 by 600 pixels, then change the refresh rate to 60 hz or you could change it to 1280 by 1024 pixels and 60hz but it should work with 800 by 600 too, then plug it back into your des ... HP L1706 17" LCD Monitor

Need Help Setting Up Monitor


Basically the monitor wants your video card to feed it the display at a resolution of 1024 by 768 pixels. The 60Hz is the frequency and is standard for lcd monitors. Since the monitor is designed for 1024X768, it is shutting itself off in order to pr ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Bought a new CPU and cannot get the image repositioned properly. Needs to come up and over to the left. Model 2401NM


Go to display properties (personalize on Vista) , and try reducing screen size to fit the screen.I quote one of the many online tutorials:To change the display settings, follow the procedure below:\015\012 \015\ ... Westinghouse Computer Monitors

My syncmaster 710n is not working. I get the box where it ses what resolution si the right one, but the syncmaster 710v works normaly. Does that means my 710n can't be repared anymore? Thanks


Not completely sure what you're saying. Here's what I got out of your problem:You have a Syncmaster 710n that displays a box saying the best resolution is _____ x _____, but your Syncmaster 710v doesn't show that message.The m ... Samsung SyncMaster 710N 17 in. Flat Panel LCD Monitor

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

Colors have gone wrong


There could be 3 reasons for this...1. If color settings are changed from the computer...try to reset to defaults2. if colors are changed from monitor..try to reset to factory defaults3. If ... Dell E176FP 17" LCD Monitor

So I hooked this moniter up to my hp and all I get is two blinking lights


\012One monitor serves as the primary monitor, and this monitor displays the Logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. You can selec ... HP A4331D 20" CRT Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

System Restore... I have tried to run system restore on my computer.It satart to proceed as normal but when the computer restarts its says it couldnt restore to that date and no changes were made.ive tried doing system restore for muerous dates and the same thing happens. Any one know what to do? Help will be very appreciated. Reply Soon


System Restore is a valuable tool Microsoft released with Windows Me and substantially enhanced with Windows XP. (Windows 98 users can only gain this functionality with a third-party program.) Although it is not a backup utility per se, it performs a ... PC Desktops

Using Ezdock and GridVista with my Acer Ferrari 1004


Just wondering if you have loaded drivers for the F20, There may be a conflict with that monitor until you install the proper software. Another thing is to go into your display setting and make sure that the correct display device is selected. You ca ... Compaq Presario X1000 Notebook

I was adjusting picture on monitor and now picture completely messed up


\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

GX520 screen display message: cannot display this video mode


This means that the windows setting you have set can not display on your current monitor. There are two ways to fix this, one is to boot the computer in safe mode by pressing f8 after the POST screen and change the resolution and the other is to plug ... Dell OptiPlex GX520 PC Desktop

My CTX LCD 15" S500 monitor's screen resolution and color depth are set at the lowest possible settings, and I cannot change the settings. I can hardly read the letters and colors are impossible to determine. Is there something I can do to fix this problem? Or is it time to buy a new monitor? I'm going blind trying to view things on the screen.


First make sure graphic driver works fine and resolution is set to proper resolution.For that when you power up the computer press F8 key then enter in "Enable vga mode" then go to start menu->control panel->display property ->settings ... CTX Computer Monitors

Windows Vista does not come on the screen when I turn on my computer.


Dear Sir/Madam,\015\012\015\012 I think this is setting problem. Check the monitor setting Use “blank screen” as a screen saver option. This option will be removed. If it not clear the problem plese follow these steps to so ... PC Laptops

Keyboard stops responding after a powersave on laptop ACER 5715Z


The issue is that several of the Acer software products don't support Vista. You need to remove these programs.Follow the instructions in this linkhttp://g ... PC Laptops

Cannot get monitor out of sleep mode


About 90% of the time this is a cable problem. Check the connection on both ends. Make sure the cable is firmly seated. If it is, pull out the cable and check the ends to make sure that none of the pins are bent. If so, straighten the pin back out an ... HP PC Desktops

Color Problem Ok so i Just got this monitor right but the whole color qaulity is bad i have windows vista and the whole screen is like a blue color, ok i did everything from changing the resolution on vista to the color controls on the actual monitor, and nothing. If you dont understand let me see if this helps i opened up paint and was checking the color out and the color chart is like filled with nothing but black,blue,yellow,white and thats it...Does anyone have any idea wat this could be?


All of you mentioned are correct. if they cannot work on color setting of your monitor and for the setting of your resolutions it could be the monitor. the monitor cannot support the color bit mode which required for the windows vista it could be a 1 ... SVA-USA VR 17 17" Flat Panel LCD Monitor

Monitor goes into sleep mode after a few seconds


This is normaly cause by incorrect power management settings.\015\012\015\012check power management setting in both windows and your computers bios\015\012\015\012you will not need to worry about the power management settings ... HP Pavilion a620n (PC028A) PC Desktop

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

Monitor the light on my monitor blinks but the screen doesn't display anything


Did some thing change your refresh rates in the display section of your settings for the monitors? also have you tried to hook up another computer to see if it will display on the monitor? if nothing displays on the monitor then the monitor is faulty ... ViewSonic VP930b 19" LCD Monitor

No matter what I do with the settings, I cannot get webpages to show the whole page at once. There is almost always a side slide bar and bottom slide bar. If I choose 'smallest' for text size, it will all fit on the screen, but then the text is too small to comfortable read. This also makes games hard to play since we can't see the whole screen without scrolling. Any suggestions? Thanks!


HI,\015\012\015\012You have increase the resolution, to enable viewing all the content in single page without slidebar..\015\012\015\012Screen resolution is down to personal preference, and will depend on the size and capabili ... Acer AL1912 19" LCD Monitor

I am using a Dell Lattitude D830. I added another monitor (Dell) for home use. First time I hooked it up, it worked fine. Today, I took the laptop with me, so unplugged the monitor. Now, I cannot get the monitor to come back up. I have gone into the control panel and changed the monitors, but it still won't work. The monitor works, but I cannot get the laptop screen to show up. My wireless mouse won't work either now. I need the monitor badly, as my DH cann ot see the small screen on the laptop.


Have you tried the "function key + F8 key" since that usually is the key combo you press to switch between built in LCD and external monitor on a Dell laptop.\015\012 \015\012Worst case scenario would proba ... Dell E176FP 17" LCD Monitor

HDTV as pc monitor-no digital signal


Try different Resolutions/DPI and Refressh rates the other possibility is settings on the monitor check the manual of the monitor for use with the pc as in resolution etc. \015\012Newer monitors oftem change there own settings to best suit them ... Computer Monitors

Travelmate 4202wlmi displays incorrect setting on startup - 1280 x 768 (default Monitor on mobile Intel 945gm express chipset family) and I cannot change it to 1280 x 800 (Plug and Play Monitor on Mobile intel 954gm Express Chipset Player)which is the one I prefer. When it starts up on the default montior there is a black stripe on the right hand side and my screen is squished on the left hand side.


Some display settings are not compatible with some monitors/lcd displays...\015\012check before u make any changes to the display properties....\015\012some changes done forcebly will permanently damage ur monitor beyond repair....\ ... Acer TravelMate 4202WLMi Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6101 seconds