Having problems with your dell dimension e520 ?
how do i fix floppy diskette seek failure
after dell logo appears it wont boot up
Repair Help & Product Troubleshooting for dell dimension e520
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Floppy Diskette Seek Failure on boot up
Hello there:This is a setting in the bios , so what you are going to have to do is boot into bios and under the boot section and check to see if the floppy drive is a option that is part of the boot sequense if it is change it so th ... Dell Dimension 4600 PC Desktop
Floppy diskette seek failure
Boot into setup by pressing F2 or F10 depending on your bios and disable the floppy drive setting. ... PC Desktops
Floppy diskette seek failure
Try to go to bios set up..then change the boot order..in the boot tab,,change the "first boot" label with hard disk..then it wont seek for floppy again.. ... Dell Dimension E310 PC Desktop
Message: Floppy diskette seek failure.
Well i can tell you this most of the floppy disk you will find ends up only being able to use one time.So try using a new disk each time.GregThats from experience i use one go back a few days later and you can't even use it. So its not yo ... Dell Dimension 5150 (DIM515MIN) PC Desktop
When i boot up my e520 i get a blue screen with lots of numbers and stuff on it and it reboots in 30 seconds. Then in that boot i get a message Floppy diskette seek failure. The only way i can get back is to restore each time to a safe point. Got any ideas how to fix it it? also if i restore ans stop useing the computer or go it gos to sleep i have redo everything.
Make first boot device as hard disk and disable ur floppy drive in bios ... PC Desktops
Keyboard failure and diskette drive 0 seek failure
Been trying to figure this out for weeks have you tried a Dell keyboard It has worked for others but not for me and no It won't boot from CD because u need the keyboard to press any key to activate boot I even tried a flash drive to boot but my boot ... Dell Dimension C521 PC Desktop
Floppy diskette seek failure
F2 Scroll down to "Drives" and open the menu. choose "Diskette Drive" and turn it "Off". ... Dell Dimension 4600 PC Desktop
Hi! my computer doesn't start normally it goes back to the same error every time. Errors: Floppy diskette seek failure Drive 3 not found: Parallel ATA,PATA-1 (PRI IDE Slave) Strike the F1 key to conti
Sounds like you have a bad/disconnected Hard Drive and the system is looking for a second boot device (ie: Floppy with a disk) or your primary IDE channel on your motherboard is bad ... Dell Dimension 3100 PC Desktop
Diskette drive 0 seek failure
My guess if it's new is that it doesn't have a floppy drive but thinks it should.Enter BIOS setup by hitting F1, F2, Del or similar at startup (there should be a message saying Press <some button> to enter setup).Then it ... PC Desktops
No go toshiba p30-110 will not boot pxe-e61 media test failure tried new hard drive still the same turn off network boot still the same put in new dvd still the same tried to boot from cd but no go any help thanks
This error can be caused by one or more of the below possibilities.\015\012\015\012Floppy or CD that is not bootable is current ... PC Laptops
Drive 0 Seek Failure
Do you have a floppy drive on this computer, If so this message means that the drive is bad.\015\012If you want to disable the message or you do not have a floppy drive, do the following:\015\012\015\012Go into CMOS set ... PC Desktops
Keyboard/floppy diskette error
Hello Faithcollaps, Just few tips here:\015\012\015\012Disconnect everything like modems, printers etc.. just leave mouse, keyboard , monitor and of-course power supply connected and then check if that makes any dif ... Dell Dimension 4600 PC Desktop
Problems with getting bootable disks to be read - Dell/VISTA
Replace the CMOS battery, go into the BIOS and disable the 'Floppy Seek' function, reconnect the SETA drives and you should be good to go...The battery has about a 3 yr life expectancy, so after being 'off' for an extended period, I suppo ... Dell Inspiron 531 Athlon 64 X2 4400+ 2.3GHz 1GB 500GB DVD RW Vista Home Premium PC Desktop
Diskette drive 0 seeks failure;password
Open the case and reset the BIOS using the jumper: move it from 1-2 pins to 2-3 for 5 minutes. ... Dell Dimension 2400 PC Desktop
Boot up screen says "diskette drive 0 seek failure"
Press F2 look through the menus and remove / disable 3.5 floppy drives. ... Dell Dimension 8400 PC Desktop
I have changed my some programme setting in my computer which now i forgot. later before turning off my computer i updated my computer with those setting. then, next morning when i open my computer i was shocked and terrified when i found it's not working and showin diskette drive 0 seek failure. i have tried F1 and F2 but didn't work then i tried boot but unfortunately that didn't work as well. and when i tried the run diagonistic driver cd. i was big time smack down when it said cd doesn't wor
If the system has a floppy drive, take the diskette out.\015\012\015\012If the system has no floppy disk drive (Most Likely) boot to the BIOS and turn off the diskette controller and make sure diskette options are set to NONE. It appears you r ... Dell Dimension 2400 PC Desktop
Hi! my computer doesn't start normally it goes back to the same error every time. Errors: Floppy diskette seek failure Drive 3 not found: Parallel ATA,PATA-1 (PRI IDE Slave) Strike the F1 key to continue, F2 to run the setup utility. I tried to get into BIOS setting and F1,F2 settings every thing looks fine, but still my system doesn't start. Please help. Thanks
Enter cmos setup and turn off floppy drive seek. also, disable floppy drive. then save your changes and exit. ... Dell Dimension 3100 PC Desktop
Dell dimension 2400 diskette drive 0 seek failure
Check your BIOS setting to see if it detects the hard drive (Primary disk 0). If it can't detect the hard drive then the hard drive maybe faulty. Open the case unpluge the IDE cable from the hard drive and reconnect it again, also unplug the IDE cab ... Dell Dimension 2400 PC Desktop
New hard drive install issues
My first suggestion would be to move your boot sequence for the CD-ROM up to the top and the floppy drive to last if you do not have one. (Or second if you do have one.) \015\012\015\012You have to boot from the CD first. Once you get the ... Dell Dimension E510 PC Desktop
A screen that says diskette drive 0 seek failure keeps appearing. hoow to i start windows normally and get rid of this screen?
It is vey simple.Restart the Computer and kepp tapping F2 key and go to setup screen.under setup screen you see an option "Diskette Drive A" or "Floppy Drive" highlight it and it will say 1.44" or 3 and half inch. press space bar and turn ... Dell Dimension 2400 PC Desktop
Computer will not boot up.
That means the BIOS is looking for a floppy drive that possibly doesn't exist.Go into the BIOS by pressing F2 and where it says diskette drive on the main screen, highlight it and choose the option to disable it. Then save changes and le ... Dell Inspiron 530 Desktop Computer
Cant start my sons dell e520 even from the recovery disk. Keeps looping back to black screen and message floppy diskette seek failure.
Have you tried to put a disk in the floppy drive when it starts up?\015\012It probably had a disk in before last close down, and is looking for it now when you start up.\015\012 ... PC Desktops
MY FRIENDS DESKTOP COMPUTER NOT READING ANY TYPE OF MEDIA DVD OR CD EJECTS THE MEDIA AFTER TO CLICK ON THE CD/DVD-RW DRIVE AND SAYS INCERT A DISK INTO DRIVE E?
Its looking for a floppy drive ..go to the bios and take the floppy drive out .. ... PC Desktops
Drive 0 seeks error...when powering up, I can't find my "C" drive
Use kaspersky internet security demo software.Check the hdd. ... Dell Vostro 200 Desktop Computer
My sons dell e520 wont start . i get the windows starting screen then it switches to a black screen with the messag floppy diskette seek failure then the options f1 to continue or f2 to run the set up utility. all the safe mode options just loop back to the above black screen. The f2 option gives me a blue screen entitled dell system dm061. Ive tried booting from the recovery disk but failed. Please help.
Have you tried to put a disk in the floppy drive when it starts up?It probably had a disk in before last close down, and is looking for it now when you start up.Please ... Dell Dimension 4600 PC Desktop