Having problems with your CTX S762A 17" LCD Monitor ?

I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the monitors screen comes alive for 2 to 3 second and after that its goes to blank.

😍53% Off for first 100 people Only!😍 πŸ”₯ Claim discount here πŸ”₯: ➑ sellerscity.net/62-lazy-portable-table.html ➑ sellerscity.net/62-lazy-portable-table.html Adjustable Laptop Stand its platform for whatever you need : Bed & Couch - Book tray - watch movies - dinner table βœ… Now you can enjoy working . βœ… prevent computer neck pain (computer monitor is at eye level) . βœ… prevent overheating laptop . βœ… will serve you anywhere you go get your table today and make your life so much easier βœ…it collapses down to a flat surface for easy storing. 😍53% Off for first 100 people Only!😍 πŸ”₯ Claim discount here πŸ”₯: ➑ sellerscity.net/62-lazy-portable-table.html ➑ sellerscity.net/62-lazy-portable-table.html 🎁 Makes the PERFECT gift!

Posted by SellersCity on Sunday, April 15, 2018


Answers :

Try to do this: Just before the Windows start up screen (after the bios loading) press F8 and log in at safe mode settings. If at this mode you can see your screen change the resolution settings at a lower set. Save and reboot normally. Now try step by step to increase your resolution. In case of a blank screen appears at a new setting, don't do anything; after some seconds the monitor will come back to the previous settings. Save and go on.

In case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios
Repair Help & Product Troubleshooting for CTX S762A 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Screen goes blank


Hello..Now let's discuss what we\015\012should do when the laptop seems to be booting up without problems, the\015\012hard drive spins appropriately, and we even hear the welcome sound of\015\012the operating system, but we have no ... Toshiba Satellite A45-S1202 Notebook

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

Screen light goes out but image is still viewable...


Hello..Now let's discuss what we\015\012should do when the laptop seems to be booting up without problems, the\015\012hard drive spins appropriately, and we even hear the welcome sound of\015\012the operating system, but we have no ... Sony VAIO Notebook

VAIO PCG-K33 display goes blank during windows boot Options Ther


... Sony VAIO PCG-K33 Notebook

I have a Gateway mx3422 notebook. I cannot get the display to clone when I hook it up to a projector. The notebook screen goes black and the display shows on the projection screen.


So, as soon as you hook up the projector, the LCD goes blank? 2 things control the output, the function key to enable the external video and the display settings in Windows. If Windows shows 2 displays (Control Panel, Display, Settings), then chang ... PC Desktops

E manchine e17tg turn on power you get just a


Mrmadgbull, How long will e17tg display the WIN-desktop before it goes to BLACK screen? Is it 1, 2 ...4, 5.....20 seconds? How old is unit? Does unit have internal ac to dc SMPS or external (lay on floor) SMPS? Did problem occur suddenly? What do yo ... E-Machines E17T 17" Flat Panel LCD Monitor

My monitor shows a blank screen .But when I press the RGB, DVI button, I can see my desktop for a second then it stops displaying. I have to keep pressing the button to change the display type in order to see any screen, but it only lasts for a second between button pressing.


Moneyshaker, Maybe your screen (LCD panel) is not blank, just BLACK!!! First thing to do is the flashlight test! With monitor connected to a KNOWN GOOD fully booted pc with WIN-desktop showing, reconnect N9 lcd to pc. Then and only then turn on N9 lc ... Scanport N9 19" LCD Monitor

I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the monitors screen comes alive for 2 to 3 second and after that its goes to blank.


Try to do this: Just before the Windows start up screen (after the bios loading) press F8 and log in at safe mode settings. If at this mode you can see your screen change the resolution settings at a lower set. Save and reboot normally. Now try step ... CTX S762A 17" LCD Monitor

W1907 Monitor Goes Blank


If you still have this monitor type, you are obviously no longer under warranty and need some help, not "smart alek" or "return" it advise.The issue is with the power board that feeds the inverters which in turn power the CCFL bulbs. This mon ... HP Compaq WF1907 Monitor

Samsung 19" monitor 913n


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... HP Pavilion dv9005us Notebook

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

Monitor displays breifly then goes to blank screen


Hi this is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After going blank, you\015\012check that you can see the image on the screen by shining a flashlight into the\015\012screen, not directly but ... Gateway FPD2275W LCD Monitor

Screen comes up for about 10 seconds, then goes blank


Hello Robert,You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is ca ... LG Flatron L1750S 17" LCD Monitor

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. W ... Rosewill R700J 17" Flat Panel LCD Monitor

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

Monitor problem Monitor stays on aout 2 minutes and then gives notice "No Signal". Screen goes blank and then goes to sleep. I checked all cables into CPU seem to be attached firmly.. I plugged monitor into different electrical outlet with it's own suge protector - didn't solve problem. What do I do now? Dottie [email protected]


I used to repair LCD monitor from\015\012Dell. It works for me. You might be using these following steps to examine what\015\012is the problem of your LCD monitor. After you turned PC on and monitor stopped\015\012working or went blank, you hav ... Gateway FPD1975W 19" LCD Monitor

The panel initially displays and then goes blank


Johnerm, Good going John! At least YOU tried doing a swapout to another KNOWN GOOD pc to prove out that the E153FP is indeed the culprit!!! Now for the hard part. Do you have a bright flashlight? Reconnect E153FP to pc with WIN-desktop as the display ... Dell E153FP 15" LCD Monitor

New Samsung monitor returns only a blank screen when turned on. what can I do?


Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 910MP 19" LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Monitor turns off after 4-5 seconds


Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors

Monitor goes blank


Sounds like the back light inverter board is bad. \015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brightness allowing you to see ... Dell E153FPc 15" TFT LCD Flat Panel Monitor

Monitor is blank, help


You have bad capacitors on the power board. If it was the inverter and the transistors associated with that then you would still get a solid green power light and shining a bright light into the screen would reveal an image.\015\012\015\0 ... Dell E173FP 17" LCD Flat Panel Monitor

Monitor goes black but shows icons...


I'll assume this is an LCD panel screen.If what you are saying is the screen shows up and then goes dim or starts dim, and you can see a dark image of the system starting up and then displaying Windows...Your problem is a bad ... HP vs15 15"LCD Flat Panel Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7010 seconds