Having problems with your BenQ FP767 17" LCD Monitor ?

Monitor randomly decides not to display

\015 Hey,\015\012\015\012I have a Benq FP767+ 17" LCD monitor and sometimes it will not display anything on the screen when i turn it on (The blue light stays on thou with a blank screen). \015\012\015\012When it doesn't display anything, i just move the monitor into different positions and tilt it up and down and turn it on again and it'll work. \015\012\015\012This problem used to only occur when i turn it off. I clicked on all my settings and made them default and my refresh setting is at 60hz and 1280*1024. I've had this monitor for 2 years now and it's only just started to stuff up.\015\012\015\012Just today my monitor started to turn itself off (it only did it twice but it's working now) and i got frustrated that it woulnd't turn on again so i gave it a whack to the back and turned it on and voila, it works.\015\012\015\012Could there be a fault in my monitor now? should i send it in for repair? \015\012\015\012Thanks\015

Answers :

The problem is dry solder on Invertor board.Resolder all Invertor transistors and transformer.
Repair Help & Product Troubleshooting for BenQ FP767 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor randomly decides not to display


The problem is dry solder on Invertor board.Resolder all Invertor transistors and transformer. ... BenQ FP767 17" LCD Monitor

Randomly lost display on my pc.. and its not a faulty card.


Try to set your PCI-E card as a first one in BIOS. There also should be an option to turn off onboard video. ... Gateway GT4022 PC Desktop

Acer Aspire 3000 notebook: 1) monitor displays horizontal random lines. This can be fixed by clamping the bezel to the lid, at the position of the lid release catch, using a bull-dog (spring) clip. It works, but obviously isn't a permanent answer. New screen and/or inverter indicated? 2) computer only works from the battery - about 1 hour's use from full charge. Battery charger charges the battery only when the computer is switched off and it isn't possible to run the computer using the charger


Monitor: if the inverters were blown, you would be unable to use clamps as a workaround. I suspect a lose or broken contact to the display wafer caused by rough handling of the laptop. This is delicate stuff, you cannot repair without specialized too ... Acer Aspire 3000 Notebook

Iiyama ProLite E481S random shutdown


Hi,If you're talking about a CRT that is going on "The Blink", yes this is where the name comes from. And this is becoming more and more of a problem you do indeed need a new monitor.Three good places to shop online is : ... iiyama ProLite E481S-B 19" LCD Monitor

Cintiq 12wx My tablet only works as a tablet. The screen on the tablet when powered on says "no sync" then sleeps. It does work great as a tablet only though, but I paid for the monitor feature which sucks. I have a MacBook Pro and my tablet is connected through USB.


I was just having this same issue. My 12 inch Cintiq has always worked properly until I turned my laptop on today (windows XP). The Cintiq said "no sync" and went to sleep immediately. I checked all of the plugs.. turned it on and off, restart ... Wacom Cintiq 12WX Interactive Pen Display Monitor

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Lg monitor powersave mode and randomly turning off on ps3


No display , Power on , LED Blinck Samtron monitor ... LG Flatron L1951S-SN 19" LCD Flat Panel Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Display issue with Viewsonic VX2025wm display


This could be a few things so we'll start with the cheap and easy one.\015\012\015\012The first thing we want to check is cables and connections. First just grab the data cable at one end and gently move it it around while watching the di ... Computer Monitors

Won't Boot Working fine for about a year and a half (bought in sept 2006). About a month ago it starting acting up. Power up, fan would spin, but that's all. It would not boot up. No beeps or sounds at all. Monitor displays no input signal. Hard booted it a few times and then, it booted up normally? Powered off, tried rebooting, no luck. 4 or 5 tries later it booted up again. This went on for a few days and then it simply decided not to boot up any more. Opened box and cleaned dust out. Reseated


Power supply problems can show up in a number of ways. The capacitors that others have referred to are filters that filter out any AC noise in the system and assist in converting the AC input from the wall into clean DC current that the systems uses ... Gateway GT4022 PC Desktop

My acer laptop with windows xp will not allow me to select the optimal resolution for my samsung moniter. How do I fix this?


The Samsung SyncMaster 730b is a 17-inch analog and digital TFT-LCD monitor delivering crisp, clean text and bright, vivid colors. This display offers a 600:1 contrast ratio, 300 cd/m2 brightness, 1280 x 1024 resolution, 160/160 degree viewing angle, ... PC Desktops

Monitor not working


You will need to change the display settings for the type of lcd monitor you have, it is a wide screen I am assuming, you can change this by right clicking on the desktop select properties then settings the screen resolution should be on the middle l ... Computer Monitors

OSD Randomly Displays on Monitor


Press the OSD menu button for 10 seconds and this unlocks the OSD.\015\012\015\012Visit the below link:\015\012 ... HP Compaq WF1907 Monitor

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

Hcl make monitor hcm780m have problem of displaying monitor basic hardware setting menu


1. change the control panel Micro switchs.\015\012\015\0122. cheak the plastic panel ... Computer Monitors

I have a Dell monitor that was donated to our church and all that comes on the screen is a white. the power is on but there is nothing but white light


Please check that when u power on ur computer then the Num Lock Key of Key Board is on or off. 1- If num lock key is on & monitor is displaying white screen then the problem is with ur monitor. For that u check the VGA cable going fro ... Computer Monitors

Lcd monitor streaking


The solution may be one of several things. here are my ideas in increasing severity. 1) Bad connection. Fix: tear apart the screen and check the video connection. It looks just like that when you don't have a good connection with the s ... IBM 11P836402 for ThinkPad R40 Monitor

Viewsonic VX922 Issue with No Display yet Green Power LED Blinks ....and possible solution


Thanks alot mate! ... ViewSonic VX922 19" Monitor Flat Panel

The display on my 640M goes blank at random intervals after boot up. Could be 15 minutes, could be 2 hours. When I hook up an external display, it works fine with no issues. When I try to toggle between external monitor and LCD, message displays stating "No External Display is attached", but still only shows display on external monitor. Have replaced inverter and LCD. Double checked all cables for secure fit. Have to wait for machine to cool and then do cold boot for display to work again. Could


I think you may have answered your own question just by the process of elimination. The problem with these cables is that usually they are in close proximity to the hinge and this over time can cause rub points that will weaken or fail the cable. Mos ... Dell Inspiron 640m Notebook

Whenever the computer gets shut off randomly, the monitor does wacky things. One time it made it extremely bright and this time the color of the screen is bluish. It also wont pop up the menu when i press it.


Hayleyvivian, When Very strange things start to occur with ANY brand of LCD display the first place a technician will look is at the SMPS/inverter power supply for the monitor. One thing you could do is try to swap your display to a fully booted KNO ... Mag Innovision InnoVision LT765 17" Flat Panel LCD Monitor

Want to use samsung 2233SW LCD monitor as TV


Even still it is not working for me ... Samsung SyncMaster 2233SW Monitor

Powers on but no display on screen - Dell My XPS M2010 Notebook


Ok this is such an involved problem because it could have so many different solutions...let's go over some of your options.1. If you're trying a new monitor the monitor may not be supported by your computer or here's the stranger possibility, ... Dell My XPS M2010 Notebook

ViewSonc VX924 LCD Monitor


Check the information at Viewsonic's website regarding their warranty:http://www.viewsonic.com/support/warranties/limited-warranty/If you have your proof-of-purchase and it shows the monitor is less than a year old, it would b ... ViewSonic VX910 19" LCD Monitor

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.


That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4422 seconds