Having problems with your BenQ FP71G+ 17" LCD Monitor ?

When i turn on the pc the monitor displays :_IMPUT SIGNAL OUT OF

\015 RANGE 75/HZ /112 KHZ\015

Answers :

Repair Help & Product Troubleshooting for BenQ FP71G+ 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Dell 2407WFP Monitor losing signal and having colored line artifacts


... Dell UltraSharp 2407WFP 24" LCD Monitor

HP desktop monitor problem


Hi try this ,,,\015\012\015\012\015\012Ensure the video cable is connected (and connected to the correct video port).\015\012\015\012Turn off the monitor using the monitor's power button and then restart th ... HP Pavilion a305w (DM181AR) PC Desktop

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

No signal on first boot


I think is a power supply problem,, ... Nokia 445 Pro 21" CRT Monitor

No signal to monitor. Cable is fine and so is the Video Card -


Very vague question, but I'm assuming your computer is not a Mac, is turned on (as well as the monitor) and you are getting a no signal display on the monitor. I am also assuming if you move your mouse or press the keyboard, the display ... Impression Products Impression 7LSP 17" LCD Monitor w/ Speakers

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

I've been trying to use s-video cable to connect


\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

Laptop to tv


\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

PC or monitor, signal problems


Your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose. ... PC Desktops

Acer LCD Monitor only displays "acer" logo


You are correct, it could be a power surge that has caused it.\015\012\015\012Try this..\015\012Unplug the monitor from the wall.\015\012Remove all the video connections at the monitor end.\015\012Wait 10 minutes then pl ... Acer X193W LCD Monitor

I live in Seattle and have an Acer V193B that 'went dark' when I hot-pluggged the VGA connector into my laptop. I *assume* the problem is the chip that buffers the VGA lines is blown. (I know the cable and laptop VGA are not the problem.) The monitor has power (power button glows orange), there is just no video display. Is there any chance that I can get this repaired w/o spending more than the monitor is worth in shipping and repair costs?


First, to check the monitor.\015\012Disconnect the input signal from the computer.\015\012Turn off the monitor and unplug from the A/C source.\015\012Allow the monitor to set for a few mi ... Acer V193 B LCD Monitor

I've got a Toshiba Satellite Pro L300 that I'm trying to connect to my very old TV (16 years). I'm going through the VCR. I thought I could connect the laptop's VGA to the RGB port on the VCR, tune to the right channel, adjust the display on the laptop & poof --- big screen monitor. Well, no such luck. Any help would be appreciated. Oh, it go directly to the TV, I would need to convert the PC's VGA to coaxial. I thought it would be easier going through the VCR's RGB.


No that will NOT work, first the PC's VGA doesn't have any "Channel" Second you must install Drivers for said VGA card, and the card MUST have a TV out connector either SVHS, or Composite, video out, or as of late HDMI. You Cannot "Receive" a VGA, si ... Toshiba Satellite L300-EZ1004V Notebook

Mag monitor doesn't display bios post


The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't ... Computer Monitors

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Acer LCD Monitor - Stuck Displaying green


Cant say for sure. The display seems to be working, and the computer signal seems to be the problem. It could be a faulty cable. Check the pins on the cable monitor and see if they are bent, etc. If the connectors are Ok, it could be the conver ... Gateway FPD2275W LCD Monitor

Monitor is connected to laptop jack and displays "no signal"


You have to activate the video out of the laptop.\015\012Two ways to do this depending on how you want to use the monitor.\015\012To use the monitor by itself laptops have shortcut keys.\015\012Usually they involve using the Fn key ... Acer AL1916W 19" LCD Monitor

Same problem, acer sucks imo


Similar problem with Acer AL2216W - sometimes DVI input don't work properly (but analog in works well in the same time) and I have blackness on panel - I just need to change resolution on my ATI video card for a moment and return to native 1680x1050 ... Acer AL1916W 19" LCD Monitor

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

My monitor not turn on when the computar turn on to . and when you try to turn on the monitor its like flash for 1 sec and tune off to black . to turn the monitor on i need to prees the botten 30 time on the monitor to turn him on.


First you sec your monitor power cable is not loos or power in properly if ok then you sec your monitor VGA cable is properly conect to your pc if ok then you disconnect your VGA cable in your pc then you power on your monitor and sec that youre mone ... PC Desktops

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

No display the stand by light goes from orange to green the no signal dispay comes on then goes...but the display does not turn on. Tried a different monitor with the same video card and it works. What's the problem


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Neovo E-19A 19" LCD Monitor

Monitor starts then goes off, no signal


I would check the LCD against another monitor. It does not have to be a LCD, a regular monitor will do.\015\012This will tell you 2 things, 1. The Video card is good or bad, 2. The Cable is sendinf a good signal. \015\012If when you start ... HP w1907 LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5734 seconds