Having problems with your Apple Cinema 20" LCD Monitor ?

My moniter is not working at all, is it posibel that the power suply is the problem?


Answers :

Yes that is the first thing to check. Make sure the power cord is plugged into a good outlet and plugged into the monitor. If it still does nothing use a volt meter and check to make sure th power cable is good. If the cable is good you may have a bad switch. If that is the case unless you are familar for electronics take the monitor to a repair shop and don't try to take the monitor apart to start checking switches.
Repair Help & Product Troubleshooting for Apple Cinema 20" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My moniter is not working at all, is it posibel that the power suply is the problem?


Yes that is the first thing to check. Make sure the power cord is plugged into a good outlet and plugged into the monitor. If it still does nothing use a volt meter and check to make sure th power cable is good. If the cable is good you may have a ba ... Apple Cinema 20" LCD Monitor

Why does my computer swith on but not boot up


Hi Garnedd!\015\012 \015\012First of all, it sounds like you've taken a lot of troubleshooting steps thus far. So thank you for providing the details of those steps. It helps greatly.\015\012 ... Compaq D51S 1.6GHz Desktop XP Computer

When I power up, the moniter goes into "self check mode", then says "moniter is working correctly, check computer power and moniter cables". I hooked the moniter up to an old computer I have and it works fine. Must be a problem with the CPU? Any ideas?


Ya this problem is related with CPU Power Supply unit, please change your old SMPS and thn its working fine... ... E-Machines eMachines Desktop PC

No power plugged moniter in and no power light...tried new cord....nothing...worked one day and dead the next...fuse???


Hi:\015\012first you will need open the monitor , them look for the power supplu board and with a multimeter measure the out put you shoud have 12v and 5v , if some of this voltage is missing your problem is the power supply board , you can try to f ... Computer Monitors

Gateway gt motherboard failure


Yeah that's right. Change/replace the power supply. Yet, you have to test the power supply's conditions if it still works alright. since you are suspecting both motherboard and HDD first. If yellow light comes and no action to the whole machine then ... Gateway GT4010 (RBGT4010) PC Desktop

OPEN A BACK COVER ON MONITER


Hi im josh try this solutions of mine.\015\012Monitor Problems:\015\012\015\012THE COMPUTERS SEEMS TO BE WORKING, BUT THE SCREEN IS BLANK.\015\012- Check the monitor if turned on.\015\012 ... SAMTRON 55V 15" CRT Monitor

Colour changing i have a iiyama prolite e435s monitor and it keeps changing colour can anyone help me with this problem


I found this on another site:\015\012[QUOTE=numbnutjas]I had the same problem along with lots of others who bought this great prolite monitor.Whenever you turn the power off for more than five seconds the monitor looses an important ... iiyama ProLite E434S 17" LCD Monitor

Moniter Screen Blank when my PC start....Giga byte 8S661FXME-RZ Mother board


Try to remove the motherboard from the casing and see it if the have\015\012some capacitors or any circuit distroy. use other mother board for\015\012testing chek your hardware one by one maybe some of your hardware\015\012devices damages. ... PC Desktops

Scanport N7 LCD Monitor won't stay on


It seems a whole lot of people have moniters with fatal ailments as i do as well. after spending $ 150.00 at computor stores & still had the same problem with my Moniter I just orderd another new moniter & the Problem is fixed..\015\012 ... Scanport 17" LCD Monitor

Moniter Black - Buttons not responding


This sounds like a straight hardware issue. However, to be certain, try to attach another monitor to this PC, and if it works properly, you will know that there is nothing wrong with the graphics card/driver or other related component of the PC invol ... X2Gen MG19MY 19" LCD Monitor

Pl916s proview 19 inch flat screen moniter


Pl916s proview 19 inch flat screen moniter?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 i ... Proview PL913S 19" Flat Panel LCD Monitor

About 2 weeks ago my sister's computer(emachines t3589) shut down I first thought that was the power supply,so I replaced it ,but the problem didn't go away,then I put the old power suply back on the computer.The green lights comes on but the computer won't come back on. pleas help thanks


The CPU fan is working?The power button is working?Did you connect the cables right?If none of above fix your problem, seem to be a motherboard problem ... E-Machines PC Desktops

Pl916s proview 19 inch flat screen moniter


I managed to solve the same problem by replacing the six 470uf 25v capacitors. I have notice that the old ones has a bulging top. ... Proview PL916S2 Monitor

Hp dv6000 cant boot and the moniter is blank


The problem is in your motherboard it is a common problem of dv6000. and i think there is also a beeps sound. chat me at [email protected] ... HP Pavilion dv6000z Notebook

I NEED HELP PLEASE!!!!!!! PROVIEW 19" MONITER.


Does the led on front of the monitor stay blue or does it become amber ?\015\012If it becomes amber, then you are not getting a signal.\015\012No harm in trying this : You can try to see if it is a contact problem.\015\012With the m ... Proview PL926WBi 19" LCD Monitor

Power on emachine T6420 and moniter is blank. The moniter soon loses contact with the computer. The fan run and power is OK there is no beep code.


If you mean after the computer performs the self test the screen goes blank and stays blank, eventually turning off you are having a hard drive problem. When the computer boots you should see an E-Machines logo and/or a self test on the screen. Tha ... E-Machines eMachines Desktop PC

Desktop starts and cooloing fan stays on high peed and does not boot up,moniter stays black.


A lot of times this issue is caused by the memory. The system does not error because it can see the memory and the computer thinks it's working fine, but it's not. Here's two solutions...\015\012\015\0121. Remove the memory sticks from in ... Acer PC Desktops

Power light comes on will not boot up.


It stll could be a moniter issue since the computer is not running any programs it is not heating up therefor it dosnt require a fan my compaq m2000 is doing the same thing try plugging your computer in to a desktop moniter and see what happens you ... Compaq Presario M2000 Notebook

Moniter doesn't stay on


Hello,\015\012\015\012It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space ... Samsung SyncMaster 225UW 22 inch LCD Monitor

Auto shutdown i have Hp pavilion a1120n, my problem is when i tuen on my pc it automatic shutdown i dont know why? i thought its may be the power suply, i change the power suply but still i have the same problem... if some body wht should i do now plz let now [email protected] Thx


Usually this problem is caused by a thermal [overheating] condition. Best solution is to open the case and see if the cpu fan is working. If not replace with a new heatsink fan combo and make sure you use a quality thermal grease between the cpu & ... HP Pavilion Desktop PC

No start up , button lites up - cd-rom wont open , noticed no fans on for 3d card or big one on mother board


If the cpu/heatsink fan isn't turning then most pc's will shut down to avoid further damage to cpu & board. I would first replace the fan if it's the one over your cpu. Try replacing power supply. If your board has the 4 ... E-Machines eMachines Desktop PC

Charging or battery


With the battery in and the machine running on plugged in power, let it sit for fifteen minutes and then open the power properties panel and click on SHOW DETAILS FOR EACH BATTERY if it is not already checked. If the battery level reads 0%, and the ... HP Pavilion ze1250 Notebook

Computer wont start up. Blinking green light in the back of tower


I've had that happen twice to my Vaio desktop and there was a very easy fix. I'm not a techie, but I found a recommended solution online when this first happened six months ago. I couldn't find the solution again, but I fortunately remembered the s ... Sony VAIO VGC-RB42G PC Desktop

Packard Bell Easy Note R1910 Fault


Have a look on the net for a dismantle guide for your laptop model.\015\012\015\012sometimes your laptop moniter connector works its way loose and its a case of wiggling it back in :-) its useually under the left hinge.\015\012 ... PC Laptops

MONITER LIGHT IS GREEN BUT ONLY SHOWS A NORMAL SCREEN FOR 1/2 SECOND THEN TURNS BLACK


HI. I had the same problem with mine. It would flash the screen on for a split second and then turn black, the whole time the power light remained green. Upon opening up the case, I pulled the combo power supply board/inverter board out for inspectio ... LG Flatron L1710M 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8185 seconds