Having problems with your AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400) ?
Emachines T5254 won't boot up
\015 Worked fine for 2 days and then would crash 5 mins. after booting, and continusously reboot. Running Vista. Does not even run diagonstics now... Is this a hardware problem? How do I resolve?\015
No pal. do u have any antivirus......if not so what are u waiting for.Just install a powerfull antivirus..Just like KESPERSKY ANTIVIRUS.if every will get alright then inform me at my ID
\015\012 [email protected]
\015\012 [email protected]
Repair Help & Product Troubleshooting for AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
It keeps shutting down on us
If you have tried to boot in safe mode as wayneard has requested and it still does not boot and shuts down then you may need to restore your system.\015\012\015\012However if you have tried to boot in safe mode and it allows you to then u ... E-Machines eMachines Desktop PC
Computer will turn on but wont boot
OK, have you tried checking the connections on your hard drive, afterwards try rebooting. If it still wont boot i suggest you back up data and boot the restore CD that came with your PC. If it still doesn't work , check your BIOS, most BIOS progra ... PC Desktops
My eMachines T3882 with Windows XP just reboots over and over
If it will start in safe mode, try running your anti virus to find a virus.If it wont start in safe mode, try making bootable USB with a standalone virus checker.Seehttp://support.kaspersky.com/faq/?qid=208282173Kaspersky make ... E-Machines eMachines Desktop PC
Emachine t2596 getting power but wont boot, any ideas?
Have you made any hardware changes recently? When you say it is getting power but wont boot what does that meen. Are you getting error beeps or will it not even try to boot? Give me some detail and we should be able to get you going ... E-Machines Computer Processors
EMachine T3406 wont boot
Is there a post beep when the pc is switched on. check the memory if it is a beep beep beep sound , also disconect the hard drive, dvd drive, floppy, and any usb devices and see if it boots up. if that fails it does seem like the mother board, also c ... E-Machines eMachines Desktop PC
Emachines desktop Wont boot. - E-Machines eMachines Desktop PC
A simple and effective task (well most of the time) is to reseat components on the motherboard. This can include unplugging the components, including but not limited to:Hard Drive and Optical Drive CablesIDE/SATA ConnectorsSys ... E-Machines eMachines Desktop PC
Emachine starts boot process but stalls, no beeps
Most likeley if you see something on the screen but it wont boot it is a mem problem, does it load bios, if so it is prob not memory ... E-Machines eMachines Desktop PC
I have a Emachine W3650 And it wont start up
Insert your windows cd and set computer to start from cd. When prompted to, hit a key to boot from CD. Let Windows start the install (relax it is not really installing anything) when it gets to the prompt, tell it you want to Repair an existing ... E-Machines eMachines Desktop PC
Emachine Wont Load Windows
... E-Machines M6805 Notebook
Emachines t3958, bad ram, green stand-by only no boot
Are you saying you bought 2 more machines to fix the problem? I don't understand. Do you have the manual for the machine. How long did your system run before a Ram stick went bad? What brand and size are your Ram sticks. Are they identicle? As far as ... E-Machines eMachines Desktop PC
Monitor light blinks but no pic when booted up
I can try to help you,\015\012do you hear the boot beep sound?\015\012if you are not able to hear the beep sound then i suggest you to open the machine and check with the cmos battery if it is working or no.\015\012if your cmos battery is working the ... E-Machines eMachines Desktop PC
Frozen cursor on new emachine laptop
Before you plan to return make sure you have done some or all of this things first:1. Did you reboot after you installed the Enterprise 2007 ? 2. Did you make sure that if its a USB mouse that it is securely connected to the USB por ... PC Laptops
Blue Screen it wont let me get past the blue screen..no start menu or anything..after the blue it goes back to the gray screen with a big e on it ..and at the bottome it says f2 for setup or f10 for boot sequence..or something like that ..
When the computer first boots up, press the F8 key when the eMachines logo is replaced by the first Microsoft screen, then select Safe Mode from the list. If the computer will not boot in Safe Mode, you will need to boot from your Windows CD and sel ... E-Machines eMachines Desktop PC
I have a emachine T2824. It will not boot I have a recovery disc but it wont boot from it. Keep asking me for a password. Windows XP pops up but it goes away and then a blank screen with a flashing line in the upper right corner
When you first turn on your system look at bottom of screen it should give you info to enter setup, more than likely it will say F2 to enter setup. If you are able to enter setup check Boot devices and change from hard drive to cd rom than you will b ... E-Machines eMachines Desktop PC
Computer start but wont Boot up.
Here are a couple steps you can do to verify something didn't come on correctly. - Verify the monitor cable is connected tightly to the monitor and PC. - Verify the power cable is plugged in.If both of these check out is ther ... eMachines W3623 PC Desktop
E machin w3502 wont work at all
I am not sure what you mean "if you reboot you will loose all the data" or do you mean reformat your hard drive? You should be able to reboot your system in safe mode which will load only the minimal drivers for your system to work. Safe mode can be ... E-Machines eMachines Desktop PC
Replaced dead power supply computer still dead
Hi\015\012most power supplys are protected against faults when they are connected to damaged equipment\015\012so it possibly just protecting its self\015\012\015\012disconnect everything from the PSU except your MB\015\0 ... E-Machines D2046 PC Desktop
When I attempt to log on to my computer, I get message "Loading personal settings", but it immediately changes to "Logging off"...I can't even log on.....HELP!!! I am using an emachines w4685....
Hi, My Name is ArmyMason, I am here to help you. Are you seeing any flash of Blue Screen before it reboots? If not it sounds like you have a boot virus. If you can't boot to Safe Mode best the way to fix this is to pull out the hard drive and p ... eMachines W4685 PC Desktop
My emachine wont boot up it has never booted it was sent to factory and returned still not booting
One question that I have is did you ever have your computer hooked up to a dialup service through your internal modem? If so that could be the problem. alot of the times the modem may get a surge and cause it to fail. As a failsafe the modem will not ... E-Machines eMachines Desktop PC
The lights are on, but nobodys home
Im having the same problem with mines, so im on my laptop now. I've done some research and it turns out that eMachines has a habbit of blowing out their motherboards, and that its being caused by the design of the case for which the board sits on. So ... E-Machines eMachines Desktop PC
My emachine wont boot up beeps three times - PC Desktops
Ensure you have a functioning keyboard and mouse connected before booting. ... PC Desktops
Emachine T6528 problem: My monitor wont boot up went i start the computer!
Easiest solution is to connect your monitor to another PC, if still nothing, then your monitor is toast.If you are getting no display at all, and you tried a PCI video card and the onboard, most likely it is your monitor.This ... E-Machines T6528 PC Desktop
Wont load passed windows xp screen
Try holding down the "F-8" key when the emachines logo appears, see if you get a prompt for "safe mode". If you can get the system up and running in safe mode, shut it back down from the start menu. That should rewrite the boot sector and may clear t ... PC Desktops
Boot up emachine t3265 win xp wont boot up gets to windows frame then goes blank. safe mode locks up after displaying files last file shown mup. any help would be appreciated.
You may try "Last Known Good Configuration"\015\012 \015\012Boot the operating system with the “Last Known Good Configuration” feature. To use this:\015\012\015\012R ... E-Machines eMachines Desktop PC
Password on previously owned computer
When you are booting the computer press F8 this should allow you the option to boot into safe mode, while in safe mode you can make an administartive account and modify user accounts to your heart's content. ... E-Machines eMachines Desktop PC