Having problems with your Acer V193w LCD Monitor ?

Started pc in safe mode. Monitor comes on but screen flashes at a steady rate.Monitor will not come on unless it is started in safe mode


Answers :

Try it on another PC first just to make sure it is not the PC problem, you can also try to set the resolution to 640 x 480 @60 Hz when you are in safe mode, reboot the PC and if it displays OK, then set the resolution to the monitor native resolution which is 1440 x 900 @60Hz.
Repair Help & Product Troubleshooting for Acer V193w LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Started pc in safe mode. Monitor comes on but screen flashes at a steady rate.Monitor will not come on unless it is started in safe mode


Try it on another PC first just to make sure it is not the PC problem, you can also try to set the resolution to 640 x 480 @60 Hz when you are in safe mode, reboot the PC and if it displays OK, then set the resolution to the monitor native resolution ... Acer V193w LCD Monitor

Problm with viewsonic va712b


Sounds like the operating mode is at a frequency or refresh rate that is outside the viewsonic operating specifications when in normal mode. possible solution: in safe mode access control panel, system, devices (hardware) and look for display. do a r ... ViewSonic VA721 17" LCD Monitor

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

Cant do anything, I turn it on, get windows screen, next says windows restarting


With the hard drive removed power up the system and enter the CMOS setup utility. Make sure that it is working properly. If not then get an external monitor and plug it into the VGA port on your laptop. (should be D-shaped with 15 holes for pins). In ... Toshiba Satellite 5105-S701 (PS511U-02WYJX) PC Notebook

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

3yr old got ahold of monitor


Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors

Monitor keeps blank even the power lLED is on green


If it's working fine in DOS, it can only be your display drivers for your operating system. What happes when you start in SAFE MODE? When you PC starts, keep pressing the F8 key, go to Safe Mode. If it works, bring the Resolution down to 800 X 600 an ... Philips Standard 104S 14" cRT Monitor

Unable to open windows


Try booting into safe mode (hit F8 repeatedly when you reboot until a safe mode option comes up) then if you are able to log in, go to the windows run prompt, type "msconfig" go to startup, disable all, services, disable all. reboot. see if it still ... Toshiba Satellite A135 Notebook

Dell desktop running windows XP


You should be left-clicking when the option for safe mode comes up... ... Dell Inspiron 8500 Notebook

Windows starts to set up then screen goes black and


Sounds like you have a heating problem I need More information to help you, try pulling the side off the pc and blow off the cpu fan with compressed air for a computer store also blow out the monitor as best you ... Sony VAIO VGC-RB42G PC Desktop

Monitor won't stay on. Error message comes up that says "no input signal", then monitor goes out.


Problem with the monitor, monitor cable, or video output. For monitor, if you have more than one input, make sure it's set to the correct one. Try a different cable. Try a different monitor. Check your video card settings--if you see the BIOS boo ... HP PC Desktops

System Errors - WiFi connectivity


Lots of choices...\015\012if you have os disk boot off it and select repair which will take you to the dos prompt..(c://)\015\012here type chkdsk and enter this will check and fix any errors.\015\012other choice....when you start pc ... Acer Aspire 5670 Notebook

Monitor stopped working


It sounds like either a failing LCD or failing video card. I would probably take it to a compentent repair shop if it is out of warranty. If it is in warranty then you may have to deal with dell. \015\012You may have on-site service check what ... Dell Inspiron E1705 Notebook

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

Emachine 15' lcd monitor


Hi,Your query - "can the monitor work with an older HP computer?"Normally yes, assuming that there is no hardware fault. The message is an indicator that somehow the settings of the display of the old HP computer does not mat ... E-Machines eMachines Monitor E15T4

Dell Inspiron 1000 Unmountable Boot Volume. CD drive faulty.


First of all, have you tried booting in SAFE MODE? You can access this feature by pressing the F8 button a few times when the DELL logo appears after powering it on. After pressing F8, a screen should come up giving you several options to choose fr ... Dell Latitude D600 Notebook

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Due to an incomplete download my screen is now blank.


I think it maybe something going on with the computer and not the monitor itself.\015\012\015\012As you turn on your computer keep pressing the F8 key and it will come to a boot menu. Choose safe mode and let it boot up. If you can get into safe mo ... ViewSonic VA1916w LCD Monitor

X2Gen MW19V Greenish display


Recent Hardware Changes. Corrupt drivers for any recently installed hardware can crash the system. To get rid of the corrupted drivers, do the following:a. Uninstall all recently added hardware. b. Try to restore the system t ... X2Gen MG19MY 19" LCD Monitor

When booting up my windows is loading and then my screen goes black and come up with an error: recomended resolution is 1280x1024... how do I fix this?


Most probably your computer has a higher resolution or refresh frequencies set in Desktop Settings than supported by the monitor. It might be also, that you have previously installed a monitor driver for a different monitor model, and the computer is ... Samsung SyncMaster 710VT TFT LCD Monitor

Wont work with new computer


Since this was a new out of the box computer, Safe Mode was not allowed. In order to change monitor settings (resolution), I had to use another monitor, in this case a newer CRT. With the CRT, the computer booted up, no problem. Once booted, I turned ... Princeton Digital VL173 Monitor

Dell xps m1530 formatted hdd now it wont boot


You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

Hello I wonder if you can help. When we switch


Had a similar problem like this several times. Try choosing safe mode. Safe mode will load the required drivers. After safe mode finishes the loading process, restart your computer and choose to start windows normally. The problem you mention usu ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9143 seconds