Having problems with your Acer Aspire™ T180 PC Desktop ?

I disabled my video card now i cant see the screen???/

\015 It will show me windows logo but when boot up is finished it is black????\015

Answers :

I have used a different video card on a friends. I uninstalled hers and put a different one in just to see if it would recognize it. Then reversed the procedure to revert back to her original!
Try booting into safe mode (press F8 before windows logo appears)
\015\012
\015\012You should be able to access your desktop in safe mode.
\015\012
\015\012good luck
Repair Help & Product Troubleshooting for Acer Aspire™ T180 PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

New HDD Install Prob


Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

THE SCREEN SMEARS NAD SHUTS DOWN


Hi eakesj:A number of things here should be checked.First shut down and remove all cards, and power connections to all the drives such as cdroms, hard drives. The power supply should also be looked at and tested for correct voltage ... eMachines T6534 PC Desktop

My tower comes on but i cant see anything on the screen. sometimes it works but most of the time i see nothing except a box that says monitor is working, check pc.


Your power supply may be able to support the computer only marginally, especially if you've added drives to it. The computer will usually reboot or die altogether if the supply is bad. Replace.OR - If the comuter starts and stays running ... E-Machines eMachines Desktop PC

I have no video card - IBM LENOVO VIDEO CARD 08K3158 Graphic Card


Tools: PCI video card \015\012\015\012Im gonna take a wild stab at this and ***/ume u wanna upgrade your video, and your computer doesn't have a card right?\015\012\015\012your computer probably has a itergrated video card ... IBM LENOVO VIDEO CARD 08K3158 Graphic Card

HP Pavilion zd8000 PC Notebook Problem


Hello people! I have a solution for the resolution probleme, Please read.\015\012\015\012As all of us, I have the SAME probleme with the graphics.\015\012\015\012After having my computer crashed and out of warranty, (and after ... HP Pavilion zd8000 Notebook

I disabled my video card now i cant see the screen???/


I have used a different video card on a friends. I uninstalled hers and put a different one in just to see if it would recognize it. Then reversed the procedure to revert back to her original! ... Acer Aspire™ T180 PC Desktop

Volume Control stopped working


CLICK ON START BUTTON AND GOW TO YOUR CONTROLL PANEL WHEN U THERE OPEN SYSTEM FILE AND CLICK ON DEVICE MANAGER WHEN YOUR DEVICE MANAGER HAS OPENED CLICK ON THE DROP DOWN THAT SAYS SOUND GAME AND VIDEO CONTROLLER AND ONTOP AT YOUR MENU ICONS YOU WILL ... HP Media Center PC 873n (P9875A#ABA) PC Desktop

Screen stays black


Try using a different monitor if you have one available, or disconnect the monitor from the computer and then turn it on. If you see a logo or color bar or message saying no signal, then your monitor is OK and you should take a look at your video ca ... Acer Aspire 1414 Notebook

I believe I just got a virus on my computer. its an HP comp


Seems like a video issue. \015\0121. Check to see that the video cable is plugged in to the back of the computer and the monitor securely. If it is not check to see that the pins on both ends of the video cable are not bent o ... HP Pavilion a1610n PC Desktop

EMachine Help Hello,    Need Help w/ EMachine T6528 Motherboard/Power supply/video card! No Picture!! Was told that the Video card  was built in to the motherboard and the power supply fried the video card. Was told to buy a Newer and better video card to replace the old and the computer would recognize it and you disable the old one.. Problem is we can see nothin on the screen! What do we do to solve the problem?    Please Help...        Lost in technology..


If you took the pc in to a repair shop and they diagnosed that as the problem. You will have to install the new vieo adapter in the computer. Then plug in the monitor to see something on the screen. You can go into the bios to disable the other. N ... E-Machines T6528 PC Desktop

Pc powers up but no video on screen gateway 420gr desktop


Yes generally speaking when you drop in a videocard it typically will disable the built on one. You may have to disable it though. I know you said you did not see the onboard video in BIOS but there is almost always a setting in there to turn it of ... Dell Dimension 8200 PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

When I connecetd to a PC I can see "Test OK" on screen. But can't see anything. Please help


Disconnect the plug, assuming it's a dvi plug if it;s a vga standard plug the idea is the same unplug it with the computer running and see if plugging it back in dose anything. no? ok shut off the monitor and the computer completely, unplug the monit ... Samsung SyncMaster 913V 19" Flat Panel LCD Monitor

Acer Aspire 5003WLMi


The reason for not seeing any picture on the external is becouse it is disabled in windows. I have 3 lcd screens here, only one gives picture untill I go and extend my desktop into the other monitors.from desktop -> right click anywhere -> ... Acer Aspire 5003WLMi Notebook

IBM Flat Panel Monitor problem - light colored shifting lines (like Bar Codes)


It sounds like it's a problem with the video card, as opposed to a problem with the monitor. If you have another machine, or a laptop, or a friend with a laptop you can find out - just plug it into the other machine, and if the problem goes away, it ... PC Desktops

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

Screen goes fuzzy after 45 minutes


If you see a very dim image or black screen or flicking image on the LCD screen it means you have a backlight problem.Connect an external monitor to your laptop and power it up, if you see the normal Windows images then the video card and ... IBM ThinkPad R51 Notebook

Black Screen and Beeping on turning on my Laptop


The beep codes that you have mentioned are concerned with the video card of the computer. It indicates that your computers video card has gone bad and needs to be replaced with a new one. ... HP Pavilion dv6000z Notebook

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

17 inch monitor goes blank - X2Gen MG19MY 19" LCD Monitor


\015\012Prepare to diagnose the computer .\015\012\015\012\015\012\015\012Disconnect all peripheral devices.\015\012\015\012Perform a Hard Reset.\015\012\015\012Disable th ... X2Gen MG19MY 19" LCD Monitor

Sept. 28, 2009 (:24 PM EST The problem is that with no warning at times my monitor HP U1506 will go black and flash the message '' No Signal ''. As equally mysterious it will recover and work okay. I have tried swapping the monitor with another one I have but it doesn't help. Whenever this is happening neither of the monitors will work. I tried different cables too. It didn't help. My computer is a HP Compaq dx2450 microtower. Mother board: M2N 68-LA. Any idea what is happening? I could be wrong


The issue is not the monitor, it is the video card. It may be a driver issue (Download and update the display adapter with the latest video driver.) also try booting in the safe mode, See if the issue occurs in safe mode. If the driver update has n ... Computer Monitors

Computer freezes up after install of drivers for new video card..


It usually in BIOS it says, "PCI,PCIe,AGP. And there wasn't a 512 mb videos card size either? Something isn't right. Its like your better to have the software installed before you add the hardware and then reinstall the software. Plus, I have a video ... PC Desktops

I disabled video card now my monitor is black. i can see the boot screen. i can hear my desktop when it loads. i tried safemode(it never loads in safemode)...last known workig....i still cant see anything.


Hello,Kindly repair or reinstall your Operating system. It has a file that has been corrupted. To avoid the damage become big try to repair it or reinstall the OS without reformatting or erasing the files save in your hard disk.Kind ... Acer Aspire™ T180 PC Desktop

RESTORE DISC I have an Emachines Desktop. I am trying to do restore cd. Monitor does not seem to have a problem as it is running a test screen but nothing is coming up when I insert CD.


The 'test screen' of the monitor means only that the monitor would display if it receives an input signal.\015\012Make sure it isn't something simple like dislodged video connector on the back of your system box.\015\012You may even want ... E-Machines eMachines Desktop PC

Computer only displays vertical lines and pink background.


Most likely an issue with the Video Card or Video driver. \015\012* Boot to safe mode by tapping F8 while starting up the computer. Selected safe mode with the keyboard and hit enter. Login to your user account. You should se ... Dell Dimension 4600 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7316 seconds