Having problems with your Acer Aspire SA80 (ASA80UC4603) PC Desktop ?

No display - ON-chip VGA diabled in BIOS

\015 I have an ACER Acerpower SV. In an effort to get my new PCI video card to boot up at start-up I set the ON-CHIP VGA to "disabled" in BIOS. The result was, I now have no display signal to the monitor at all. Nothing from the on-board monitor port or the new video card port. So obviously I cannot go back in to BIOS to re-enable the setting. I have no display at all. How do I fix this???\015

Answers :

Hi ... i think you might solve the problem by removing the battery from *********** board for about 30 seconds or even a few minutes to be sure...... this should reset your bios to factory settings... good luck !
You go change it blind; in other words you do it without seeing what you are doin; yoiu likely can find the instructions or the video on utube to show you where you are goin . you should be able to do this with just seeing what your screen shots look likeand since you don't use the mouse; you just need to visualise your one click at a time comands with your directional arrows and then all the other ones you need are enter and delete ; depending on the key you need to use to go to yoiur bios set-up. And next time you are in contact with your working monitor; take pictures of each frame (screenshot) in your bios and store them in your phone or other pc so that you will always have control of this situation; no matter what happens . Or you could buy these guys' products.LOL
Repair Help & Product Troubleshooting for Acer Aspire SA80 (ASA80UC4603) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No display - ON-chip VGA diabled in BIOS


Hi ... i think you might solve the problem by removing the battery from *********** board for about 30 seconds or even a few minutes to be sure...... this should reset your bios to factory settings... good luck ! ... Acer Aspire SA80 (ASA80UC4603) PC Desktop

Refusal to display


Hey bud did you try testing your memory chips popping them out one by one and see if your memory chip is bad its happened to me many times and also if you have had the pc running and swiched in your bios from onboard vga to off since your running an ... AOpen PC Desktops

HP laptop display issue


If you are recving 1 long and two short beeps, it is not a memory problem.\015\012It is not a Lid closing or lid switch problem.\015\012If you are able to switch to and from your LCD and Monitor, you are lucky. ... HP Pavilion dv6000z Notebook

Trying to locate a service/user manual for the motherboard


Remove the onboard battery out for about 30\015\012minutes, this will cause the bios to go back to the default settings!\015\012Or look on the board for CMOS RAM clear. \015\012Pins 1 & 2 are normal mode and pins 2 & 3 will Clear ... Compaq Presario S4000NX (DF213AR) PC Desktop

It turns off for no reason unexpectedly - Toshiba Satellite A105 Notebook


Is the Air Intake Duct dirty? (Bottom of laptop where air is drawn in)If so, this is an indication that the entire cooling system is dirty, as well as the other components inside the laptop.[Laptop off view the bottom. Laptop ... Toshiba Satellite A105 Notebook

Laptop display distortions


I can not give you a complete answer to this, but i will be more than happy to provide you a couple of opportunities. for one, depending on your model there have been some new updates on manufacturers websites for issues described such as yours. ther ... PC Laptops

Where do we find the display lid switch for a HP Pavilion dv9715nr ? we replaced a damaged hinge on this laptop first and now we cannot get a display.


Let me guess. Damaged Left hinge? HP had a recall for this problem, but the recall has lapsed as of May 31, 2009. ... PC Desktops

My Gateway GT5678 system powers up as if normal but no display and no error beeps. Fans are running lights on, no image. Checked all components on another computer and they work. Think it is the motherboard, but want to be sure before buying a replacement. Any ideas?


When you say you tested the other components, did you test the graphics card in particular on another computer?If so, and if it worked, you can try clearing the CMOS. There should be an easily identifiable switch or set of pins with a jum ... Gateway GT5678 Desktop PC

No display power light comes on but monitor will not display.


First open cpu cover then refix RAM memory.Then power up then press F8 key then enter in enable vga mode go to control panel ->dispaly ->settings change screen resolution to 1024*768 .If you still not get display check monitor ... Acer 22" X223w LCD Monitor

Display problem Dear I have Acer aspire 5570 laptop but problem is dispaly is not coming after boot. we can see only acer logo and all after that nothing on diaply.


The most common beeps that you will encounter 95% of the time in repairing PC's\015\012are:\015\012\015\0121 beep - computer ok\015\012continous beeps / long beeps - memory error\015\012continous short beeps - bios boot block/ ... Acer Aspire 5570-2758 Notebook

Can Windows 7 be installed on X05? I get ACPI incompatible BIOS and have updated to last known one. Please help!


\015\012The only issue i can see is if your your ram has not been updated since leaving the factory, you will notice from the tables W7 requires a min of 1GIG and your machine leaves the factory with 256mb(dependant on country possible) so c ... Samsung X05 Notebook

I need to diable the onboard video card before installing a PCI-E 2.0 graphic card. From what I have read, it's possible this is done automatically, through BIOS, or by a jumper setting. I never received any manual that would describe such a procedure. The PC is a Gateway Model GM5472. Thanks


It is an option in the BIOS under "Advanced Bios Features". Set Initial Display to PCI Express VGA card. Your options may be slightly different due to different BIOS. ... Gateway GM5472 PC Desktop

Acer Aspire 9303wsmi No Display on LCD, no display using external VGA DSub, (no sign of characters on dark screen (ie if the backlight had failed) removing all power and battery and using one or other (ac / battery)and powering up: Bios does one long and two short beeps (then appears to be booting (disk activity) after about 30 sec / 1 minute it spontaneously powers off (all the time wih no display) subsequent attempts don't seem to startup instead just power light and numlock illuminater, r


I too had one long beep and two short beeps on startup with no image on my acer laptop. Tried everything including changing the memory modules but still did not work. Finally came across technomart. They fixed the video chip fault and its working ver ... PC Laptops

Bios problem Power On Self Test (POST) Beep Codes and Bios Error Messages


Standard Original IBM POST Error Codes1 short beep\011Normal POST - system is ok2 short beeps\011POST Error - error code shown on screenNo beep\011Power supply or system board problemContinuous beep\011Power supply, system board, or ... PC Desktops

Got a flickering in my video, installed brand new Video card. No change. Unplugged everything, except monitor (I meam mouse & all). Still flickers Monitor Acer AL2017


I had this problem once. Turned out to be the VGA plug connecting to the computer. Make sure this is inserted at the computer properly. Wiggle the plug and see if that effects the monitor display. If it does, then replace the VGA lead. Also check tha ... Acer AL2017 20" LCD Monitor

Pc does not display after changin Ram


Hi,Sorry to say. But you need to understand the various reasons for 'No Display'I will give a few suggestions for you try for solving the problem.1. Is PC working with some other monitor? (Monitor problems and char ... Compaq Presario 5000 PC Desktop

4 beeps 2373 laptop


Standard Original IBM POST Error CodesCode Description\015\0121 short beep System is OK2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or ... IBM ThinkPad T40 2373 Notebook

Black screen on acer 242lc lights come on power up


You indicate that the lamp for Power On comes on? (Light bulb icon) What about the harddrive activity lamp? (Media Activity icon. Looks like a book. Third icon going right, from Light bulb icon) Is this lamp lit up? (May flash ... Acer TravelMate 242LC Notebook

At POST I get 2 short beeps - Dell Dimension 5150 (DIM515MIN) PC Desktop


It depends on the bios chip maker Here's some other beep codes: for Award and Phoenix BIOS: 1 short beep: Normal2 short beeps: CMOS error1 long and 1 short beep: DRAM error1 long and 2 short beeps: Video card ... Dell Dimension 5150 (DIM515MIN) PC Desktop

Mag monitor doesn't display bios post


I have no experience with the DVI links because such technology is still unavailable here in Argentina. We have DVI video cards but finding a suitable DVI monitor is another (long) story.I think that your card (that has 2 DVI ports) is initiali ... Computer Monitors

Acer Aspire 9303wsmi display problem, 1 long beep, 2 short. HELP!


Hi,What you hear are bios beeps. They signal you that something is wrong. These beep's vary by the manufacturer of the bios chip that you have. You can find out what bios you have by looking at your manual. The common cause for ... PC Laptops

Onboard VGA port disabled, in Vista


You should try to disable it in the hardware list. \015\012\015\012E-machines have an odd bios where not all the functions of the motherboard are available to the user.\015\012\015\012If you can find the make and model of your ... eMachines EL1210-11 PC Desktop

Monitor is black and when I hit the menu button it displays "going to sleep"


Power up the computer then check num lock led on keyboard when you press num lock key if its led show on and off then your cpu gives display to monitor then make sure vga cable from monitor from monitor to cpu is attched properly to cpu.\015\0 ... HP Compaq FP 7317 17" Flat Panel LCD Monitor

Re: Errors being experienced with the ACER ASPIRE 5100-5758, OS VISTA. Error dealing with BUS:06, DEVICE:04, FUNCTION:00 AND ON TO FUNCTION:03


Hi, Nice report. We don't see these too often. You've had quite a few tech inclined people on your machine. My first hunch was memory timings and that could still be the problem. However, there is also memory on the display ad ... Acer Aspire 5100 Notebook

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4295 seconds