Having problems with your Acer Aspire 5600 Series 5630-6951 Laptop ?

I was going to do a power point presentation however I could not te the projector to connect to the computer. I rried different cables however no luck the projector was working but could not ge signal from computer what did I do wrong or is it a computer problem? Computer is Aspire 5600


Answers :

Did you make sure the external VGA connector on the laptop was enabled? On most laptops you have to switch it on with one of the function keys (varies by manufacturer and model). You also need to be sure the projector is set for the VGA (computer) input. Some projectors auto-sense the source, and on others you need to manually select the input.
Please go through the following manual to check the product specifications and the ports which has the laptop you are using.......
\015\012
\015\012http://support.acer.com/acerpanam/manuals/acer/0000/userguides/AS5600_3680_UG.pdf
\015\012
\015\012Make sure that you are using the right cable to right port of the laptop and insall the CD for your projector.
Repair Help & Product Troubleshooting for Acer Aspire 5600 Series 5630-6951 Laptop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was going to do a power point presentation however I could not te the projector to connect to the computer. I rried different cables however no luck the projector was working but could not ge signal from computer what did I do wrong or is it a computer problem? Computer is Aspire 5600


Did you make sure the external VGA connector on the laptop was enabled? On most laptops you have to switch it on with one of the function keys (varies by manufacturer and model). You also need to be sure the projector is set for the VGA (computer) in ... Acer Aspire 5600 Series 5630-6951 Laptop

Missing NTLDR file


The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

Re: Errors being experienced with the ACER ASPIRE 5100-5758, OS VISTA. Error dealing with BUS:06, DEVICE:04, FUNCTION:00 AND ON TO FUNCTION:03


Hi, Nice report. We don't see these too often. You've had quite a few tech inclined people on your machine. My first hunch was memory timings and that could still be the problem. However, there is also memory on the display ad ... Acer Aspire 5100 Notebook

Hello, I have a Gateway model GT5662, stock setup - Will not boot


Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC

Dell Poweredge 4300 Bootup problem after cmos battery replacement


Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

I am trying to connect to a Toshiba TLP-T60M through my notebook which is an Acer TravelMate 3230 but it is coming up with Unsupported Sinal.


There are a few things that could factor in to this.\015\012\015\0121. Be sure that your laptop is in 'presentation mode' as in, there may be a key combination requiring the use of the 'fn' key possibly which will cycle through three diff ... Acer PC Desktops

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?


Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

Upgraded RAM, Now CPU Says "No Input Signal. Go To Power Save."


I would check the documentation to ensure you purchase the correct memory. If you purchase the wrong memory type, it could cause issues like these. ... PC Desktops

Memory inserted Wrong side


Hi\015\012\015\012When you insert a memory wrong side and try to boot the computer, there are chances that it may damage the motherboard. Also it may or may not give any beep sounds.\015\012\015\012You may try booting up the c ... Medion MD-1704 PC Desktop

Memory inserted Wrong side


Unfortunately the memory socket has probably been damaged. An experienced electronics technician might be able to replace it, but the board could easily be damaged by the replacement work. It would probably be best to replace the motherboard in thi ... PC Desktops

Very slow computer


A slow computer can be caused by a multitude of reasons, but it is not due to your Internet speed. Typically the most popular reasons are:1. Too many things running in the background (including viruses, malware, and spyware).2. A fr ... HP Pavilion HP A1000Y Desktop PC w/ Intel Celeron D 335 2.8GHz processor 2.66GHz (565953)

How do send monitor signal to my tv


Not familiar with this particular model but a lot of factors are involved here and it may not be possible depending on both the television capability, and the video hardware on that model of computer. However your question about how to SEND the signa ... Compaq Armada M700 Notebook

Monitor malfunction, says VGA Input: No Signal and goes to sleep


From what you have described it appears that the onboard video might have malfunctioned,there is no way to replace it, you can however go buy a video card from your nearest computer retailer. you just want to make sure it is compatible with your mach ... PC Desktops

When i turn on my computer all it tells me is sva no signal input please check video signal


No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

How to Wipe, Degauss, or Destroy Data on a Hard Drive


You own a computer and then purchased a new one. After moving all of your important data to the new computer and deciding to sell or donate the old computer you are faced with the question of deleting the data or destroying the hard drive. One one ha ... PC Desktops

My Asus PG221 monitor suffers from frequent issues in which brightly coloured pixels randomly appear on the screen, then the screen will go black for a few seconds. Sometimes 'DVI - no signal' will appear, and usually the picture comes back. However, the issues do not cease. Seemingly the only way of temporarily stopping them is leaving the monitor overnight then switching it on again, after which I get about 30 minutes usage before the problems begin again. The problems occur particularly when


I'm afraid this looks like an electronic fault. Some component, most likely a capacitor, has degraded, is overheating and going out of spec.You just might be able to squeeze some more hours of work - but the monitor is still likely to dro ... ASUS PG221 22" TFT LCD Monitor

Matshita DVD-RAM UJ-840S Problem


CD drives work by reflecting a laser to a sensor, where the existance or absence of a reflected signal corresponds to a 1 or a 0 in the binary code.\015\012\015\012Prefessional "pressed" CD have a much greater level of "contrast" between ... PC Laptops

Computer has frozen on windows logo


1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

Registrty cleaners i was wondering if you could recommend an adequate free registry cleaner that works.i'm unable to afford licience key for the current registry mechanic i have installed.or recommend other free software that will keep my computer running at normal pace.windows xp retrestrak 2002 sp2...thankyou.....


Hi there, whiteox. I do not generally support changing registry entries unless there is a really good reason for doing so - in other words, a real problem in the operation of your system. This is primarily because, as I think you have likely co ... HP Compaq d530 PC Desktop

How many hard frives can be installed


You can put as many drives as you can fit as long as you have the cables and connection. Usually 4 is the max in a computer, but you can by a SCSI IDE card and add even more. The biggest problem is to make sure that the jumpers are set to slave on ... Dell Dimension 4600 PC Desktop

Display failure after having lid closed while running


The solution to your problem is probably not the monitor, follow these steps:1. Connect and boot your computer with 2 different monitors.2. If it does'nt work with either of them the problem is from another computer component.Posibl ... Dell Inspiron 8500 Notebook

PF790 monitor picture issue


Was it dropped? If so, it could be a board crack or damage to the CRT.\015\012\015\012Was it stored in an unheated garage, shed, or attic, etc.?\015\012\015\012Damp air or widely changing temperatures can cause condensation on the circuit boards.\015 ... ViewSonic PF790 19" CRT Monitor

My touchpad mouse has stopped working. Hardware and driver are completely okey but it still does not move. The strange matter is that the mouse works only in case of pressing "mute button" on the laptop in addition to touch pad (simultaneoulsy). moreover, the enter key has stopped working and there is a continuous beep while turning on the computer (for about several seconds). Is there any relation between these events? please help me specially with my mouse.


The beep(s) you're hearing are most likely the POST (Power On Self Test) error signal(s). When your computer is first turn on it runs a series of test call the POST. This signal is indicating that there is something wrong with the computer hardware. ... Dell Inspiron 6400 Notebook

Laptop turns on and off, no display


This could be caused by a couple of causes, the most popular are Malware attacks and Overheating issues with the processor. Just remember though that there could be permanent damage to the motherboard and no fix except replacement is going to work. I ... HP Pavilion dv6000z Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7705 seconds